BMW BRAKE & 4x4 warning lights reset

In this video I have a 2007 BMW X3. The BRAKE & 4x4 warning lights were stuck on, and i couldn't figure out why. Turns out this can happen when you replace a battery, or simply unhook the battery terminals.
NOTE! this is not the same fix for the BRAKE - 4x4 - ABS warning light issue.
Appreciate what you just saw?
Buy me a coffee if you’d like.
OR A BEER 😎🍺
Cash app: $Murk55
Venmo/PayPal: Murk55
This method should work on any BMW, but specifically for:
2004 BMW X3 X5
2005 BMW X3 X5
2006 BMW X3 X5
2007 BMW X3 X5
2008 BMW X3 X5
2009 BMW X3 X5
2010 BMW X3 X5

[@bobsava6526]

Thank you. This was very. very helpful.

[@marcellopapi9180]

This even worked for the airbag and other Brake light that were also on, thanks

[@franciscocoyotedelacruz2960]

Thanks for your video it helped me a lot

[@ricardoandrade7208]

Gracias por tu video pero no funcionó con migo tengo
2009 BMW 2009 X3 I Please do You have any idea what we can do

[@JasonTheDj-en5bc]

Yo thank you so much I was scared it was broken

[@bradchristianson5134]

Thank you worked for my 2007 bmw 530xi

[@De_General23]

Omg you’re a lifesaver!!! Don’t know you but, I owe you a beer!!

[@marcjohnson5148]

Awesome to have come across this video.

[@hanifpatel5896]

Thank you for your usefully video it's work on my x3 e83 thank you very much you are life saver

[@mansamusa7688]

This worked for me, thanks!

[@Biscaynedave]

Thank You ! how do i get my Headlight inop dash light out, all my lights work

[@murkoutdoors]

If you're 110% sure that all bulbs are working... (including the rear hard to get one) then you might have to get the FRM Footwell Module Reset. Unless you have the computer to do this, you'll need a tech. Never had experience with that though. Its always been either bad bulb, or bulb connector for me. good luck.

[@Biscaynedave]

@@murkoutdoors Thanks, the rear "hard to get one" is the lower/center brake lights ?

[@Actongue]

This also works if just the 4x4 light is on.

[@pnportugal1]

Very Very helpful, thank you for sharing !

[@LuizamaJacque]

Hello buddy! I did that but my light on still! Do you know i need to do ? Thanks buddy

[@murkoutdoors]

Try removing the positive terminal of the battery for a few minutes. Then repeat the steps.
If it still does not fix the light, then you have a different issue, outside my knowledge. Good luck.

[@DUBAICOIN_DBIX]

Thank you so much
I did it and all is working fine now❤🎉🎉🎉

[@steeelyj]

Worked so far for me thanks! 🥂

[@maozhou4065]

Very helpful so far and thanks!

[@Tears2FollowOfficial]

this helped my gf thanks 🙏🏽

[@joshualengyel60]

Was shitting my pants unplugged the battery and got both lights first video I seen and it took it right away big help lmao

[@JonasRojas-t3t]

Muy útil la verdad muchas gracias por su video❤

[@luismayorga3667]

Damn 😮 you are the master

[@soogoodsays]

Hi, how can i reset airbag light?

[@hugoamia]

I have a 2009 X5 and 4x4! Light went on - I did the turning of the steering wheel, but it didn’t work for me! :/ It is Wed. AUGUST 21, 2024 / 5pm

[@ridingnice-eatinggood9216]

Thanks work for me

[@wishfinvideos]

Thanks! That worked!

[@sxr0388]

Thanks Bro!
Great tip

[@javierpnd3625]

If the signal don’t go what can be master?

[@YouHaveGreatMusicTaste]

Lmk if you find out my 4x4 didn’t go away

[@murkoutdoors]

If after multiple attempts it doesn't fix the issue, then its likely the Transfer Case Motor Gear is going/gone bad. Here is a link to the part, and you can find videos of replacing it on YT. amzn.to/48qSBRL

[@RebeccaWilczynski]

Amazing, thank you!

[@davestelmaszewski3584]

Thank you!

[@06atrium]

It didn't work for my 09 x3.. I was hoping

[@squiddlysquiddly143]

I did that and mine goes away and came back as soon as I moved and hit the brake

[@murkoutdoors]

If it only comes back when you hit the brake, then this is likely your transfer case actuator.
Well beyond my expertise and knowledge though. Sorry the fix I provided did not help you. Good luck.

[@sureillytirado395]

I did it a couple of times and goes away and them keep coming back

[@scratcherscratcher11]

THANKS!

[@MeleecWhiite]

I hope it works on my 08 528

[@gregh3181]

Your 4x4 actuator is failing...

[@fernandoruano1000]

Looks like I have "the different issue."" Can you help??

[@Tommy-ys9gt]

Not work on my x5 e53

[@davidhargreaves2266]

This didn’t work on mine

[@jwsimon5940]

I have same issue but this did not fix it.

[@murkoutdoors]

After trying this, if it does not work. You can remove the positive terminal on the battery. Then put the battery terminal back on and repeat steps. If it still does not fix, you need to get a code reader to see what the fault code is. One like this for example: amzn.to/3M1Ndfb

[@vxrtex9782]

This doesn't work for me idk but I still got the 4x4 light on

[@murkoutdoors]

HI This only works to clear the two lights together, Brake and 4x4. For just the brake light, you can try this: Reset Your Brake Warning Light
Insert the key (or key fob) in the ignition.
Move the key to position 2, but don't start the ignition.
Open the driver's door and wait for approximately 10 seconds.
After completing the above three steps, the brake pad lights should reset!

[@riuzakizombi7907]

😢 It didn't work

[@moloch_icecube]

Did nothing for me!

[@JamesBond-uo6of]

did not fix the problem

[@sergiomatos9563]

Thank you, it helped me a lot.

[@cynthiasarah4286]

I didn't work on mine

[@murkoutdoors]

If after multiple attempts it doesn't fix the issue, then its likely the Transfer Case Motor Gear is going/gone bad. Here is a link to the part, and you can find videos of replacing it on YT. amzn.to/48qSBRL

[@cynthiasarah4286]

@@murkoutdoors i had the transfer case opened and the parts are new.
Sorry i need to clarify my abs and break light and 4x4 is on. Its stuck driving fine in 4 wheel drive.

[@murkoutdoors]

@@cynthiasarah4286 Understood. Apologies, but that's beyond my expertise given those circumstances. I'm sorry i can't help. Take care, be well.