Well done with the meter fix... I own two AV2 beasties & they both suffer from the jerky meter syndrome. I ran my Heathkit T3 signal tracer through & it's motorboating. I've replaced all the electro's & checked the virtual centre-tap & all seems fine. Work is ongoing. Thank you for this post:)
You can also use a dryer sheet to reduce/eliminate static on a meter. When I first heard that I was a bit skeptical but I had a meter that had taken a bump and that was enough to impart a bit of static to the movement. A couple of swipes of the sheet immediately drained it off, actually surprising me!
Well done with the meter fix... I own two AV2 beasties & they both suffer from the jerky meter syndrome. I ran my Heathkit T3 signal tracer through & it's motorboating. I've replaced all the electro's & checked the virtual centre-tap & all seems fine. Work is ongoing. Thank you for this post:)
You can also use a dryer sheet to reduce/eliminate static on a meter. When I first heard that I was a bit skeptical but I had a meter that had taken a bump and that was enough to impart a bit of static to the movement. A couple of swipes of the sheet immediately drained it off, actually surprising me!
Hi,I recently came across some vintage heathkit items,does the hw-18 have any value to collectors?
Excellent. For the cap with the writing not visible... Just write the info on the visible side, or make a label.
i was thinking of asking a watch restorer to see if you can remove the pivot oil and replace with some nice fresh oil.
👍
👍 ❤