drev1 I know this is a few months later but just want to say, he might as well mention it in the comments just for fun. Or, if you have nothing nice to say, don’t even say anything because you’re being rude. Maybe go to English and Grammar class and learn how to spell “even”.
for a straight grip gap, put the end of the grip where u want the gap to be, then cut the extra off and use the other factory cut end as the other side of the gap. it come out perfect every time!
@@ferdifresh8464 what are you talkin about? Almost every skateboard is lower than $150. I'd say $125 is the average for a skateboard. I guess if you went with gold-plated 24-karat trucks and a supreme deck than you sure you could go over $150.
Great set up. I just finally bought a premium set up with sublmnl and brt with teak tuning and some dope swirl wheels. Now I understand. But it's one and done for me lol
A trick I learned to Poke holes into the grip is to take the axle of your tuck and stick it in through the back of the deck so you know where to make the hole. But you have to hold down the grip around the hole so you don’t get those nasty air bubbles. If you do get some grip stuck to your axle it’s easy to wipe it off with your fingers and it doesn’t affect your truck at all. Also if you buy cheaper trucks they tend to have the kingpin at the base plate of your truck stick out a bit, so it won’t be flushed with the board. You can file it down a bit and it won’t affect but if you chose not to your truck tends to easily fall off.
I used to play with Tech Decks so I decided to watch some videos and ended up finding out its an actual sport and that there are better brand decks. If youre wanting to promote the sport youre doing a good job and honestly make me wanna buy one lol. Keep up the videos
I actually went to black river site. Went through the catalogue and the most expensive set up you can build is like $170.00 between deck, trucks wheels and grip all separate. I know it’s fucking nuts that they can sell this fraction of a board for MORE than a actual board.
6:38 ‘’You know, actually screwing that nut on top.’’ Chuby you’re a Legend! Edit: 9:11 ‘’You take one of your nuts...’’ Chuby you’re such a F*cking LEGEND!!! Edit Number 2: 10:25 ‘’Your nut’s gonna get right stuck in there the wrong way and you’ll have to pop it out, put it back in the correct way.’’ WTF CHUBY YOU’RE SUCH A F*CKING LEGEND!!!
I realize this is an old video but when you cut the griptape for the "grip gap" why did you use the end you cut with your scissors to put on the gap side? You should have turned it around and used the perfectly straight edge they had cut already to put on the "grip gap" side for a cleaner appearance.
Yo, have you ever done an obstacles video? I've seen you do a deck collection but idk if I've seen a obstacle collection. Would be fun to see your favorites and what tricks are most steezy on what etc. Much love
If you use scissors don’t use the sharp side, just scrape the edge with the square side of the scissors and it just scrapes the straightest line youl ever see, and it doesn’t ruin the side of the board too
So no washers with bubble bushings? I just got a pair of dynamic trucks and some teak tunning bubble bushings but idk the correct way to set it up to get the best performance out of those products
6:24 “nut it off, really quick, simple.”
Chuby you are epic
ButterBench FB WOW THATS SUS AF
ButterBench FB u need to post
@@arizonayee2746 sry bro cant watch then 😂
Arizona Yee haha
K o z y _ f b w
Who keeps coming back to this video, I just find it so entertaining to watch. 😂
Meeeee
7th time for me
This is prolly the 50th time or 30
Yep
Me
My heart skipped a beat when he brushed his hardware in the trash 🤦♂️🤦♂️🤦♂️
14:23 he brushes hardware into trash😂
NOOOOO😂😂😭
I was literally looking at the comments to see if anyone else noticed
drev1 I know this is a few months later but just want to say, he might as well mention it in the comments just for fun. Or, if you have nothing nice to say, don’t even say anything because you’re being rude. Maybe go to English and Grammar class and learn how to spell “even”.
*OOF*
I love blink 182 dude
By the way, if you want your griptape cutouts to be straight, you can just flip over the bit that you cut so that you use the perfect line
for a straight grip gap, put the end of the grip where u want the gap to be, then cut the extra off and use the other factory cut end as the other side of the gap. it come out perfect every time!
I should be editing a vlog but here I am watching a grown man play with a miniature skateboard with his fingers. But I love it!!! Keep it up man!
lmaooo i appreciate that man!
*cost more than a very expensive skateboard setup*
Kogarashi beats actually cost more than a skateboard a normal good skate deck it’s crazy 😮
Right I have to skateboards and both of them were under 150 dollers
Colin Fischer ik so is mine too but a good skateboard is 100 and over so yea 😊 so I guess sometimes the fingerboard cost more it still blows my mind
boi u can spend 150 ez on a basic skate
@@ferdifresh8464 what are you talkin about? Almost every skateboard is lower than $150. I'd say $125 is the average for a skateboard. I guess if you went with gold-plated 24-karat trucks and a supreme deck than you sure you could go over $150.
Great set up. I just finally bought a premium set up with sublmnl and brt with teak tuning and some dope swirl wheels. Now I understand. But it's one and done for me lol
You never bought another set up???
A trick I learned to Poke holes into the grip is to take the axle of your tuck and stick it in through the back of the deck so you know where to make the hole. But you have to hold down the grip around the hole so you don’t get those nasty air bubbles. If you do get some grip stuck to your axle it’s easy to wipe it off with your fingers and it doesn’t affect your truck at all. Also if you buy cheaper trucks they tend to have the kingpin at the base plate of your truck stick out a bit, so it won’t be flushed with the board. You can file it down a bit and it won’t affect but if you chose not to your truck tends to easily fall off.
9:26 "medium looshish"😂
I’m good, I’ll stick with my Tech Decks
john cenas voice: *ARE YOU SURE ABOUT THAT?*
Buy a broken knuckle if wanted
@Jc. Niles i think you should not tight them very hard because i think they will brake
Joshy Cosh yes
Says everyone that hasn’t tried a fingerboard that’s like saying you’d rather use a Walmart board than one from a skate shop😂😂
How to sum up this video: LIT.
Lit?
Windell Smith what
Jeff
I used to play with Tech Decks so I decided to watch some videos and ended up finding out its an actual sport and that there are better brand decks. If youre wanting to promote the sport youre doing a good job and honestly make me wanna buy one lol. Keep up the videos
Tysm man!! I really didn’t know hot to put the trucks, tysm!! Have a nice day too!
Anyone know how to buy the pivot cups at 3:59 or what it’s called
Probably one of your most specific and good video mann. We can tell u put a lot of time into it!
What about washers for the trucks???
same question here
I actually went to black river site. Went through the catalogue and the most expensive set up you can build is like $170.00 between deck, trucks wheels and grip all separate. I know it’s fucking nuts that they can sell this fraction of a board for MORE than a actual board.
“We need to shove that back in there” Chuby you’re the best
What’s up chuby great complete
I watched this video when I got my new fingerboard. Thankyou very much chuby muffin or 'JEREMY'.😁
IF there is one RUclipsr i love,its you
Really appreciate I was going to get my fingerboard without knowing how to build it and bye the way I subscribed to you on every device and liked too
"Pro bushing" I'm glad your successful with multi color compressed rubber. Not gonna lie you do a better grip job than me on my actual skateboard
Ayyyyyyyy my boi. Excited for the collection!
Your the best at grip jobs and gaps!
I wish I could meet you sooooooo bad brooooo!
2:16 its easy peasey lemon squezey. But sometimes its difficult difficult lemon difficult.
Bro I think u are the greatest person who makes fingerboard review
I remeber watching this video ages ago. Here I am back again 😌
10:21 ive never used lock nuts before, so whats the right and wrong way?
Can you do another vid of how to customise your grip tape
I'm fine with my 12 dollar p rep
Cole Drinkwater lol same
Same
Cole Drinkwater same
Same
I have a *$20* p rep
😎😎😂
3:37 sick bars bro
?
@@sandradesmond4261 He's talking on beat for a while
Don’t wanna fudge that one up Carl 😂
I bought trucks that come with your bushings team tuning is my favorite brand for finger-boarding i am trying to get on the teak team
What size is the deck
The Bakery stock is fly as all hell my guy! Will be copping some gear next paycheck!
Yoooo thanks bro
This setup is LIIIIIIIIIIIIIIITTTT
My man is on the grind
I hate how fingerboard setups are much more than a skateboards setup is
Well you don't have to spend even close to that. A broken nuckle is miles better then a techdeck
@@Rob.Brown13 of course
Thaguitargamer:-_- it’s because the demand for trucks and there is only 3 good truck company’s. Same with wheels.
there are more than 3 just go on instagram i know about 5 that arent dynamic blackriver or yellowood
Lol skate setups can be crazy expensive... Thinks about special trucks, limited edition decks or shaped ones, custom grip etc
Acid Tuning are my fav for Brt pivot cups
Can you please review the origin fingerboard kit?
6:38 ‘’You know, actually screwing that nut on top.’’
Chuby you’re a Legend!
Edit: 9:11 ‘’You take one of your nuts...’’
Chuby you’re such a F*cking LEGEND!!!
Edit Number 2: 10:25 ‘’Your nut’s gonna get right stuck in there the wrong way and you’ll have to pop it out, put it back in the correct way.’’
WTF CHUBY YOU’RE SUCH A F*CKING LEGEND!!!
Love your video. And watch you for two years and I keep loving the content. 👍🏾🤙🏾✌🏾👌🏾🔥
Very enthusiastic 😂 love it. Nice board , great info. Until you really think about it, grip gap is a single cut before it’s applied. Shred on Brotha !
You should review 4 corner fingerboards, cheap and insane quality, blessings! Love your videos
Your set up is 🔥🔥🔥
When you put the wheels on the fingerboard’s trucks, should I put the wheel first then the Bearing spacer?
“just wanna guesstimate”
Chuby Muffin 2019
I’m gonna say it, scissors are the best way to cut grip
If you don’t want a defined angle
I am coming to workshop!!
I have the same exact bushings. Not just because it’s from teak I got the Sam exact color and stuff
I realize this is an old video but when you cut the griptape for the "grip gap" why did you use the end you cut with your scissors to put on the gap side?
You should have turned it around and used the perfectly straight edge they had cut already to put on the "grip gap" side for a cleaner appearance.
These hate comments 😂 guys its a hobby if you love what you're doing then by all means spend all the money u want. Its about having fun anyways 😕
14:24 lmfao the hardware goes into the trash
11:25 "grip cap" dang chuby stop the cap
jeremy ive been watching you since like, before 10k bro i love your vids
Congrats on 60k Jeremy! You’re awesome!
I've always had a hard time screwing in the trucks, thanks
Same with me I hate that 😂
Just ordered my first fingerboard
old outro plays.. getting chills
Is it cheaper to get the blackriver base plate and hanger separate or get the whole trucks?
Yo, have you ever done an obstacles video? I've seen you do a deck collection but idk if I've seen a obstacle collection. Would be fun to see your favorites and what tricks are most steezy on what etc. Much love
Holy fuck I died 14:43 I didn't realize you threw away your bolts the first time around 😭😂
LOL
I bought blackriver trucks and I love them but one of the nuts keeps loosening? Help please!
excellent use of the curb your enthusiasm theme
Ok just bought ur bushings from teak!
Now you got me wanting a sblmnl dang.
Just got some of those bushings 😀
This might be late but u should do a tutorial about screw on board rails?
You make the best videos ever chuby
Super glue works great for those tech deck truck problems. Or if you dont have lock nuts.
Where’s the video of this boards first session?
It was so funny when he brushed the hardware into the bin😂
If you use scissors don’t use the sharp side, just scrape the edge with the square side of the scissors and it just scrapes the straightest line youl ever see, and it doesn’t ruin the side of the board too
Great video mr. Chubby muffin
So no washers with bubble bushings? I just got a pair of dynamic trucks and some teak tunning bubble bushings but idk the correct way to set it up to get the best performance out of those products
'' you don't won't to fudge that one up carl''
Your a legend chubby🤦♂️😂
Great video! Appreciate this!
Does it matter if you don’t have pivot cups? I’m thinking of getting bubble bushings.
Where can you get cheap nuts and bolts?
Where should the grip gap be nose or tail I'm confused? I'm new
Tail
@@jamiej7177 Thank you so much
If I was gonna watch any video on fingerboarding it would be you!
7:53 Thats what he said
what’s better a flat board or a board with concave
Kenneth Hasbrouck personal preference
Love the weekly vids !
Keep it up!
What are those pivot cup things called
3:05 singuaalar im dead 😂
can i use other base plates for black river hanger?
most of the time it wont fit but go for it lol
Do you guys have any washers on the trucks
What’s the difference between this and a $2 teckdeck?
Everything
whats the grip gap for? to know where is nose and tail ?
The grip gap is just a style preference.
Do you have a few tricks on a fingerboard
Bro what are those little pieces of plastic called? Like the pivot cups
My wheels keep falling of how do I fix that
Yo Jeremy have you tried the Unique juvie shape? You should definitely try it out for a video
Daniel fb I have actually, probably my second favorite deck of all time.
ChubyMuffin dude theyre so good
My teak tunings are always off centered
because they're china garbage
*ITS MORE EXPENSIVE THAN A FULL SKATEBOARD SETUP*
Did anyone catch when he was putting on the bushing and said pivot cup