Like a lot of others, I too saw Carolyn mentioned your channel and had to come by and check it out. I've been thinking of making a kitchen camp box myself! Thanks for some good ideas!
3:45 Seen a fair few DIY wood work projects myself and have seen plenty people who drive nails even when they glue. They say the glue is what binds and the nails hold the pieces together while the glue dries. The added brace just upgraded this to earthquake grade!
Very cool! Thanks for sharing I am about to build a very similar one. Protip if you are lazy like me is to make a list of your panel sizes and get home depot to cut them for you. Their big saw does a better job than you could at home. They also never charge the cuts in my experience. If you are nice to the operator at all they always just wave you off .. they don't seem to want to do any paperwork lol. I always zip them together with pocket screws and always amazed how quickly it comes together and how strong the end product is.
Thank you for making this video. I have my wood cut. Most of my hardwear and soon also will have a camping kitchen box. I did put some stencils on the outside.
Wow, I might use this for kitchen but at one point I had an awe awe moment. This would be great for my kitty box and put her bed on top. I know she would use the litter box but not sure if she would be happy with her own space, especially since she owns everything.
This is a lovely video, thank you for showing everything in detail (like the flathead/roundhead screws... seems simple but its a detail that could save me a lot of frustration). one thing though... would you please for the love of god put the safetybracket back on your anglegrinder? those cutting disks can explode and they will do some severe damage. thanks for the helpful upload!:)
Thank you! It actually broke off, so that I couldn't put it back on. The thing died entirely, sometime after making the video (HFT garbage!). We now have a cordless Ryobi -- with a guard.
Love the wine glass holder!! Most of these are built by dudes and they just don’t have a feature like that! I also like your note about the totes. That said, I’d say you are a darn fine woodworker!!
2:16 The Ghost of Handy Man Past...in shock. Lol. Taking notes myself. Thank you for uploading all the steps. Does the hot plate still fit on the shelf when the fuel cylinder is in place? (I've noticed elsewhere that it sticks out a bit once inserted for use).
Yes! With this stove, the fuel cylinder fits entirely within its compartment. It means the stove is a little larger than some of those really compact ones that are out there. I also only use butane. It is capable of using propane, and has a hose to connect to one externally. I like having that ability, in case I can't locate butane, or for very cold weather.
@@ShoestringMartha Very good info, thank you. And thank you for answering. And uploading. I get stuck on a query, and forget to thank video posters for the enormous amount of work they go to, to upload a video. 🙂
I’m so glad you posted this! I’ve been looking for something like your idea. I loved the clip of Ross yelling, “Pivot!” A great little memory from….back in the day. I can’t believe I even wrote that but, I’m still in denial about getting older. I also appreciate your showing the clip of you wearing a headband…as a gardener I can drip buckets from my head…something that is so unexpected. Just nother reason I wear a hat :). Thanks
LOL aren't we all in denial about that 😄 I often wear a bandana in the summer, either on my head or around my neck. I soak it in water first, so it's like my own personal evaporative cooler -- classic desert rat trick 😉
I put 2x10 or 2x12 on my metal sawhorses and cut them a few inches longer so I have mini work bench that clamps can be used on. Put 2 or 3 together for a bit bigger work bench/ table. Can also screw the saw horses to short scrap countertops. Those countertops are usually available at Restore locations and usually quite inexpensive.
Very nice! We finally have sawhorses, and sometimes, even plywood to put on top of them. I also freed up a folding table that was functioning as our miter saw stand, so I have way more -- and way safer -- work surfaces choices now. Thank goodness! (Also I love ReStore).
This is an awesome box. I giggle at some of your real life authentic comments too. I got super excited when I saw the use of trofast bins. My kidlets are all grown and I actually have the tall Trofast frame and a couple of bins. I am going to use this for my kitchen box frame, get a couple of lids for the old bins (so glad Ikea still makes them), and add a front drop down "table" with a chain that will act as the door to hold on my stuff in it. I may try to add a swing out pantry like you did. Again, awesome!
Sounds like a great plan! A drop table will definitely give you way more surface area to work on. One thing that I thought of afterward, was I wonder if it would have been better to have the drawers pull out laterally, as opposed to long ways, for better access. Something to consider. 🤔 Best of luck with your build!
Well, for not being a woodworker, you did one hell of a good job. (I'm envious of all your tools! I build with a hammer, screwdriver & a Japanese handsaw.) Love ur sense of humor too. 👏
Judy was correct I left my ass off when you said you made the grain match because you weren’t a savage. Love your layout not one of those super micro builds where you got to have $10,000 worth of tools to even do it
I have the camping kitchen box my father made in around 1947. 13 deep, 16 high and 26 long. Has shelves and 1 drawer. Unlike yours, it was just for cooking and eating tools, silverware, plates, mixing bowl, fry pan coffee pot, etc. Its 1/4 plywood with 2 doors on front. Must have 10 layers of old time varnish on it.
Very well done build Martha! The plastic bins as drawers is just so thoughtful for weight savings..I was doing something similar but with built drawers instead. I’m not handy by any means…so my one and only attempt at building the drawer system for my rig was a real learning experience lol. I missed quite a few structural reinforcements I see you implementing that seem so basic and fundamental in nature, that would’ve totally made my build more worth while. Also, without any legitimate power tools or workshop, I had Home Depot do the big plywood cuts, and then rented power tools and/or did the rest of the build by hand on a make shift plywood work table on the ground lol. Don’t think I’ll attempt V2.0 until I have at least the tools & infrastructure you have.
Way to make it happen, even with limitations! Many people wouldn't even try. 👏👏👏 Bins are great for saving weight, but also, I just really hate / am not very good at building drawers. I will get out of it any way that I can 😂
Simple? Hmmm! I guess I'll first need to make a gift list of power tools needed to make this beauty. At least I'll have relevant instructions. Saving... pennies and video. 😊 Thank you.
I think it could all be done with 2 tools: the saw of your choice (circular, table, or jigsaw) and a drill. 🤔 Cutting the hinge was easy with an angle grinder, but I have seen someone do it with a jigsaw, fitted with a blade for metal. If you have the patience and energy, it could probably be done with a hacksaw. However, my angle grinder was about $10-$15 from Harbor Freight, and I have used it for so many projects! The brad nailing could certainly be replaced with a few well-placed screws. I just really enjoy using the brad nailer. PEW PEW PEW! 😄 But don't let that stop you from getting any and all of the tools you might "need". 😉😉😉
Great job, it looks awesome!!! Curious though - how much does it weigh approximately? How are you securing it so it doesn't become a projectile if you have an accident?
@@ShoestringMartha Got it. Thank you so much for promptly answering my question. I might be able to lift 40 lbs for when I need to just have my van. Great idea, and you did an amazing job! Enjoy your adventures, stay safe.
I agree, plastic bins instead of wooden drawers. Faster, less expensive, and lighter. Even my homemade teardrop trailer has shelves spaced to hold plastic bins for drawers. My chuck box for truck camping has no "front" or shelves, just a carry box full of shoe boxes. For travel, I slide all the shoe boxes out onto the picnic table, roll the box onto it's back, and place the shoe boxes back in. This design requires that the carry box end is a square so the shoe boxes fit in with the carry box opening either facing forward or up. Width is dependent on my how many shoe boxes you want to put in. Couldn't be more simple. Of course no stove, dutch ovens, or large pots! All the small items very well organized, though.
Yeah, you have enough room, wenn the Rear seats are down. 1,65m in lenght! I love the Frontera. The Offroad capability is Good enough (with higher Suspension, 1“Bl and 31“Tires) for my use. I have also built the Kitchen for Inside and Outside use. Id have Stands from a Bierzeltgarnitur.
I sort of did, just by accident! The pantry kept swinging out too wide, so I added a small block to the top of the lid, that rests on a magnet on the top edge of the pantry -- supports the lid, and keeps the pantry in place.
I used Sketch (which is different from SketchUp or SketchApp) . It’s not really intended for plans. But I had it and am familiar with it, since I used it for work as a UX Designer 😀
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![PORTABLE KITCHEN: All-In-One WATERPROOF Chuck Box Kit! Pelican 1510 CASE [Astro Camper Van Vanlife]](/img/1.gif)
Wow. You really know your way around tools and woodworking. Love it!
LOL thanks - I make a lot of mistakes, but I try!
That thing where it requires a beer bottle to swing open the side is one of the most creative ideas I've ever seen!
Pay the toll of you wanna eat! 🍺
@@ShoestringMarthakitchen tax🍻
👌 Wow! Great camp kitchen- Chuck box!
Caravan Carolyn suggested a visit. Here I am! She loves your camp kitchen. So do I. Great project.
Like a lot of others, I too saw Carolyn mentioned your channel and had to come by and check it out. I've been thinking of making a kitchen camp box myself! Thanks for some good ideas!
Hi. I came over from Carolyn's to see your project and it looks like what I need too! Thanks for sharing your ideas.
Caravan Carolyn sent me (she said to tell you that!) and I have to agree with her----this field kitchen is BRILLIANT!
Hey there, cool Kitchen Chuck Box. I saw your video referral on Caravan Carolyn's post. Good job!
Danke für diese tolle Anleitung! 😊
Ich wünsche allzeit eine gute Reise.. 🥾💚
Thank you, and to you as well! 😊
Creators with a sense of humor are very much appreciated!!
Campervan Carolyn told us about your box COOL 👍❤️😇
Caravan Carolyn sent me
3:45 Seen a fair few DIY wood work projects myself and have seen plenty people who drive nails even when they glue. They say the glue is what binds and the nails hold the pieces together while the glue dries. The added brace just upgraded this to earthquake grade!
"head to HD for some ply...OH, ARE YOU KIDDING ME"! Too funny. Nice Video and good instructions!
Every. Dang. Time. 😂
came from Caravan Carolyn...she praises your channel and chuck box. subscribed...binging now.. :D
Very nice! Corey, you are so talented!!
I just stumbled across your channel and boy am I glad I did. What a fantastic idea! Thanks for sharing
Hiya and welcome aboard!
Thank you! I've always wanted to build one of these. Not only do you show how to build it, you show how to plan it.
I like your layout. Too funny when you said, I made the grain match,
I'm not a Savage.
Very cool! Thanks for sharing I am about to build a very similar one.
Protip if you are lazy like me is to make a list of your panel sizes and get home depot to cut them for you. Their big saw does a better job than you could at home. They also never charge the cuts in my experience. If you are nice to the operator at all they always just wave you off .. they don't seem to want to do any paperwork lol.
I always zip them together with pocket screws and always amazed how quickly it comes together and how strong the end product is.
Hi Martha came over from Carolyn,, my daughter and I go camping starting in April till end of October,,do to I’m in Ontario Canada 🇨🇦,,
From a retired carpenter with 26 years experience. Nice job!
Wow, thanks!
Heard about from Caroline. Great chuck box..😃
Thank you for making this video. I have my wood cut. Most of my hardwear and soon also will have a camping kitchen box. I did put some stencils on the outside.
Best of luck with your build -- the stencils will be a really beautiful touch!
Nice ideas! Very relaxing & not in your face. I can't wait to build my camp box. I like yours a lot better than the typical REI style.
Thanks! Hope you have as much fun with yours as I did with mine :)
Wow, I might use this for kitchen but at one point I had an awe awe moment. This would be great for my kitty box and put her bed on top. I know she would use the litter box but not sure if she would be happy with her own space, especially since she owns everything.
Great idea! Totally understand -- we have a feline queen as well. 😺
Really terrific ideas!
New Sub from Campervan Carolyn! She says to say HI!
👋👋👋😁 Hiyyyyaaaa!!
Hi I`m from Caravan Carolyn`s channel as well! She said to say Hi!!
This is a lovely video, thank you for showing everything in detail (like the flathead/roundhead screws... seems simple but its a detail that could save me a lot of frustration).
one thing though... would you please for the love of god put the safetybracket back on your anglegrinder? those cutting disks can explode and they will do some severe damage.
thanks for the helpful upload!:)
Thank you! It actually broke off, so that I couldn't put it back on. The thing died entirely, sometime after making the video (HFT garbage!). We now have a cordless Ryobi -- with a guard.
At least put a phone book under your shirt
Hi! Caravan Carolyn suggested your channel. She says, “Hi!”
Ah, this is exactly what i have been looking for!! I might steal some of your solutions. Thank you for sharing!!
Found you on caravan Caroline and she is right, you are very clever and handy. This was a great idea for traveling.
Love the wine glass holder!! Most of these are built by dudes and they just don’t have a feature like that! I also like your note about the totes. That said, I’d say you are a darn fine woodworker!!
Thank you! It's all about priorities 😄🍷
Okay this is hysterical. I never heard of this caravan Carolyn that I reading here in the comments. Nice build.
I hadn't either until she mentioned me in a video. She does have an entertaining channel, and clearly, a fun and enthusiastic following. 😂 😂 😂
2:16 The Ghost of Handy Man Past...in shock. Lol. Taking notes myself. Thank you for uploading all the steps. Does the hot plate still fit on the shelf when the fuel cylinder is in place? (I've noticed elsewhere that it sticks out a bit once inserted for use).
Yes! With this stove, the fuel cylinder fits entirely within its compartment. It means the stove is a little larger than some of those really compact ones that are out there. I also only use butane. It is capable of using propane, and has a hose to connect to one externally. I like having that ability, in case I can't locate butane, or for very cold weather.
@@ShoestringMartha Very good info, thank you. And thank you for answering. And uploading. I get stuck on a query, and forget to thank video posters for the enormous amount of work they go to, to upload a video. 🙂
Nicely done, and nicely shot (video).
I’m so glad you posted this! I’ve been looking for something like your idea. I loved the clip of Ross yelling, “Pivot!” A great little memory from….back in the day. I can’t believe I even wrote that but, I’m still in denial about getting older. I also appreciate your showing the clip of you wearing a headband…as a gardener I can drip buckets from my head…something that is so unexpected. Just nother reason I wear a hat :). Thanks
LOL aren't we all in denial about that 😄 I often wear a bandana in the summer, either on my head or around my neck. I soak it in water first, so it's like my own personal evaporative cooler -- classic desert rat trick 😉
I put 2x10 or 2x12 on my metal sawhorses and cut them a few inches longer so I have mini work bench that clamps can be used on. Put 2 or 3 together for a bit bigger work bench/ table. Can also screw the saw horses to short scrap countertops. Those countertops are usually available at Restore locations and usually quite inexpensive.
Very nice! We finally have sawhorses, and sometimes, even plywood to put on top of them. I also freed up a folding table that was functioning as our miter saw stand, so I have way more -- and way safer -- work surfaces choices now. Thank goodness! (Also I love ReStore).
Same, but I got a 2" pink foam insulation board to put on top. The circular saw cuts into that instead of the plywood top
This is an awesome box. I giggle at some of your real life authentic comments too. I got super excited when I saw the use of trofast bins. My kidlets are all grown and I actually have the tall Trofast frame and a couple of bins. I am going to use this for my kitchen box frame, get a couple of lids for the old bins (so glad Ikea still makes them), and add a front drop down "table" with a chain that will act as the door to hold on my stuff in it. I may try to add a swing out pantry like you did. Again, awesome!
Sounds like a great plan! A drop table will definitely give you way more surface area to work on. One thing that I thought of afterward, was I wonder if it would have been better to have the drawers pull out laterally, as opposed to long ways, for better access. Something to consider. 🤔 Best of luck with your build!
Well, for not being a woodworker, you did one hell of a good job. (I'm envious of all your tools! I build with a hammer, screwdriver & a Japanese handsaw.) Love ur sense of humor too. 👏
We’ll I don’t have a Japanese handsaw, so you’ve got me beat there. I’ve actually had one on my list for a while. 😄
Great video 👍
You are a huge inspiration ☺️
Judy was correct I left my ass off when you said you made the grain match because you weren’t a savage. Love your layout not one of those super micro builds where you got to have $10,000 worth of tools to even do it
Caravan Carolyn, told me about your channel.
I enjoyed your video. Looking forward to seeing part two. (An amazing idea)
Neet camp kitchen looking forward to see how you fully set it up 😊
Nice work Martha ! Hope to make mine soon too !
CC sent me!
I have the camping kitchen box my father made in around 1947. 13 deep, 16 high and 26 long. Has shelves and 1 drawer. Unlike yours, it was just for cooking and eating tools, silverware, plates, mixing bowl, fry pan coffee pot, etc. Its 1/4 plywood with 2 doors on front. Must have 10 layers of old time varnish on it.
It sounds perfect - what a treasure to have! 😍
love the attitude and approach - late to party but good luck going forward from NZ
Thank you! 😊
Same here. Glad I found this helpful video!
@@ShoestringMarthahope you make more videos! ❤
That’s a really cool kitchen!
Not many woman have all the equipment as you have ! Boy the things I could make if I had a lovely table saw, skill saw etc.
You did a fine job.
Thanks! Renovating a house led to quite a garage-full 😅
i love to listen to you. so much fun. thank you for this.
Nice chuck box build!!
Thanks 👍
Great job love the ninja lumber headband!tip...support wood when using skillsaw. Scarp,vlamps,box whatever even hubbies fingers..much safer.
Keeps my hair out of my eyes! 😂 And yes... excellent safety tip 👍
Very well done build Martha! The plastic bins as drawers is just so thoughtful for weight savings..I was doing something similar but with built drawers instead. I’m not handy by any means…so my one and only attempt at building the drawer system for my rig was a real learning experience lol. I missed quite a few structural reinforcements I see you implementing that seem so basic and fundamental in nature, that would’ve totally made my build more worth while. Also, without any legitimate power tools or workshop, I had Home Depot do the big plywood cuts, and then rented power tools and/or did the rest of the build by hand on a make shift plywood work table on the ground lol. Don’t think I’ll attempt V2.0 until I have at least the tools & infrastructure you have.
Way to make it happen, even with limitations! Many people wouldn't even try. 👏👏👏 Bins are great for saving weight, but also, I just really hate / am not very good at building drawers. I will get out of it any way that I can 😂
Heard about your grub box from Caravan Carolyn. You did a great job on it. New subscriber here. Carolyn says hi. 👋
Welcome!!
Excellent job!
Thank you very much!
Big like for your nice and helpfull box..Great work
Cool design and of course you are tickled pink with it!! Campervan Carolyn said it would be neat. Spot on 🌾🌻🌾
Caravan Carolyn suggested your channel, I'm happy she did. Subscribed!
Awesome - welcome to the fam!
Nice!! Greetings from Argentina 🇦🇷
🍀HI Caravan Carolyn sent me,she's awesome. Love what you building. That would be something Carolyn could use! Take Care!💙🌸🙏🌸🙏
Hi! I'm from Caravan Carolyn's channel!
You’re an inspiration.. thank you for this video 😍💕👍🏽🇦🇺👏🏽
I'm watching it in Korea.
I'm getting ready to go car camping.
You're Awesome. 😊😊😊
No you're awesome! 🫵 I hope I did not embarrass myself too much in this video 🫣 : ruclips.net/video/2iEUNUDVuB8/видео.html
Wonderful project. From SPAIN I wish to see the next video soon. Thanks very much.
Thank you and welcome!
@@ShoestringMartha 😘😘🌴🌴☀☀☀☀
New sub from Caravan Carolyn! Hugs from Goodyear, AZ!
Hey neighbor!
Caravan Carolyn sent a bunch of us over. I have been wanting to build a camp kitchen for a few years. Digging stuff out of a plastic bin is a pain.
Welcome -- and AGREED!
That's a great idea! Thanks for sharing
If I ever get a camping van I will make one of these.
Nicely done!
very cool design! i cant wait to build one
I found you on Carvava Carolyn. Love the whole chuck box thing.
Really nice Vid... Just watch and relax 👍👍👍
Wowwww ! Congratulations!! Great job!! Thanks for sharing
+1 new subscriptor
Cheers from Spain
Caravan Carolyn mentioned your channel and chuckbox. Had to stop by (and subscribe!) to check it out.
That looks awesome . Great job .
Simple? Hmmm! I guess I'll first need to make a gift list of power tools needed to make this beauty. At least I'll have relevant instructions. Saving... pennies and video. 😊 Thank you.
I think it could all be done with 2 tools: the saw of your choice (circular, table, or jigsaw) and a drill. 🤔
Cutting the hinge was easy with an angle grinder, but I have seen someone do it with a jigsaw, fitted with a blade for metal. If you have the patience and energy, it could probably be done with a hacksaw. However, my angle grinder was about $10-$15 from Harbor Freight, and I have used it for so many projects!
The brad nailing could certainly be replaced with a few well-placed screws. I just really enjoy using the brad nailer. PEW PEW PEW! 😄
But don't let that stop you from getting any and all of the tools you might "need". 😉😉😉
@@ShoestringMartha thank you. I’m inspired.
Thanks for the video! Wasn't sure it was doable, but your video helps a lot!
Might do this for beach season this year but add wheels on it and a bed :)
Love that idea! Maybe you can find a garden cart to refurb for that purpose 🤔
Great job, it looks awesome!!! Curious though - how much does it weigh approximately? How are you securing it so it doesn't become a projectile if you have an accident?
I’d say 40lbs, loaded. I don’t secure anything, but if I did, I’d run a strap through the handles to the cargo attachment points in the floor.
@@ShoestringMartha Got it. Thank you so much for promptly answering my question. I might be able to lift 40 lbs for when I need to just have my van. Great idea, and you did an amazing job! Enjoy your adventures, stay safe.
I agree, plastic bins instead of wooden drawers. Faster, less expensive, and lighter. Even my homemade teardrop trailer has shelves spaced to hold plastic bins for drawers. My chuck box for truck camping has no "front" or shelves, just a carry box full of shoe boxes. For travel, I slide all the shoe boxes out onto the picnic table, roll the box onto it's back, and place the shoe boxes back in. This design requires that the carry box end is a square so the shoe boxes fit in with the carry box opening either facing forward or up. Width is dependent on my how many shoe boxes you want to put in. Couldn't be more simple. Of course no stove, dutch ovens, or large pots! All the small items very well organized, though.
Love the idea of using shoe boxes 👏🏼👏🏼👏🏼
I have Build something else for my Opel Frontera (in US Isuzu Rodeo).
Greatings from Germany!
Nice! As a former 60 series Land Cruiser owner, I can appreciate a boxy wagon 👏
Yeah, you have enough room, wenn the Rear seats are down. 1,65m in lenght!
I love the Frontera.
The Offroad capability is Good enough (with higher Suspension, 1“Bl and 31“Tires) for my use.
I have also built the Kitchen for Inside and Outside use.
Id have Stands from a Bierzeltgarnitur.
I like your sensibility.
great job and well documented !!!
Great work! Do you have plans and material list available?
Thank you! Unfortunately, I do not. Hopefully, one day, I can go back to my notes, take measurements, and properly document it.
Lady... You are amazing! :)
New subscriber. Great build, enjoyed your personality.
Welcome and thank you!
Caravan Carolyn sent me... says Hi!
Thanks for sharing!
7:00. You should add a rest for the lid. All that weight on the hinging mechanism can lead to premature failure
I sort of did, just by accident! The pantry kept swinging out too wide, so I added a small block to the top of the lid, that rests on a magnet on the top edge of the pantry -- supports the lid, and keeps the pantry in place.
"...because I'm not a savage." This cracked me up. Edited to add: kitty verified lack of savagery
😄 😄 😄 Douglas has excellent design sense!
I heard that too!
Me too😂😂😂
Simple box, thank you
Awesome job! I think I can do it too!☺️✌️✨❤️
Mine is made out of an old dynamite box by my cousin’s grandfather, it’s the perfect size for kitchen stuff, though not the stove itself
Love the aesthetic - sounds like a dynamite design! 🧨🧨🧨
The best kind of plywood is alley found plywood!
Wow! You are so good!
Great video!
Cool video and great job. Makes me sad to call the beautiful 60 Series Landcruiser a 4 runner.
Alas, the 62 footage was archival, from when I used to camp in the "olden days". I sold the ol girl off a while back 🥲 and got a 4Runner.
Great job! This is the first female build chuck box video on RUclips that I’ve seen. 👏👏👏
Hi Martha, LoVe this build! Do you have an estimate of the dry weight before adding your bins and burner? TIA
Thank you! I would guess about 15lbs.
@@ShoestringMartha Try weighing it and not guessing.
Caravan Carolyn sent me!!
Hi, like the build looking to build one myself. What program did you use to make the design and cut list. Would really appreciate it. Thanks!
I used Sketch (which is different from SketchUp or SketchApp) . It’s not really intended for plans. But I had it and am familiar with it, since I used it for work as a UX Designer 😀