On behalf of many frustrated Android users, I want to thank you for the video. I am having no trouble connectng now with my Android phone. When I go in manually, after the automatic start, this things pops. No hesitation at all. Again thanks for sharing this video.
Thanks a lot pal you don’t know I how long I have had trouble with the ZINO firmware.I updated the firmware last week everything worked but Android.I was looking for help on RUclips and I saw your tutorial ,I watched it several times and yes it works fantastic first time . Thanks Mate I can’t believe it
I don't care what anybody else thinks about you because I think you are all right , thank you for keeping me from breaking my Zino pro plus worked just like your video say's still F''ing with my mind but dose work SMH ;)
I have the same issue.. it really is frustrating.. there was a time that it took almost an hour before i was able to fly my zino because of this issue.. This vid is helpful.. thanks
You opened our eyes... You were the first to know... You are our hero... A miracle happened!!! etc.: -))) You might be surprised, but this was already 3 months warned ALL owners Hubsan Zino - what everyone needs to always connect the USB cable to the smartphone only after pairing the remote control with the quadcopter. :-) -) The need to connect the smartphone is the last (to the console) has long been known in ALL forums in the world... :-)
I followed that process every time! The problem is for android phones, like mentioned in the video is that my controller wasn't connected to the drone. The app that automatically starts after connecting the txt cable from controller to phone was the problem. Once again, this is a fix for those having the same problems. I have tried searching all over Hudsan Zino forums and could not find anything, as well as trying to connect with people and they did not know how to fix the problem. That is why I finally connected with Hubsan for their help. Fortunately, I figured out the problem. Sorry if this doesn't apply to your situation. Thanks for the comment!!!
I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
Hi! I was hoping that your method would fix my issue. I am not sure if the Drone itself, or the controller puts out the wifi signal for the phone to pick up, but after the upgrade, the drone went from awesome, to sucks. I really regret doing the upgrade, because it worked pretty decent prior. I am not getting a WIFI signal from the drone since doing the upgrades to the firmware. Any Ideas?
For "Android phone " how to connect the drone. Step 1: Go to the Settings on your device and go into System Step 2: Go to "About Phone" and click on "Version Number" then you will see the device is already in Developer Mode. Step 3: Go back to "System" and go to "Developer Options" Step 4: Turn on the "USB Debugging" Mode. Step5: （1）Long press the power button on the transmitter, run the X-Hubsan APP and use the adapter cable to connect the HT016B transmitter to the mobile device. For USB connection Mode, use the default "Charging Only" option. （2）Confirm to use the USB in X-Hubsan.
I for one didn't see the forum posts, so I appreciate this video. I have been having some problems with my drone as well, and this video resolved that. Thank you!
too bad that in reality You have not read the main forums Hubsan Zino (only 4 now), there are many necessary and interesting... for example: www.rcgroups.com/forums/showthread.php?3140448-Hubsan-Zino-4K-camera-3-axis-gimbal-foldable-design/page1 facebook.com/groups/HubsanQC/
Hi Chris, I just took the plunge and decided to update my controller firmware. Everything seemed to go ok as per your video, but now I can't get the remote to pair to my phone. The 4 blue LEDs flash continually in sequence and never go constant to indicate battery life. I'm pretty sure the cable is ok as it charges. Any ideas??
Thanks... that was helpful. What I did find is if I power up the transmitter after the transmitter is connected to my android phone, the app is loaded and can successfully enter the main menu... a little more efficient than closing app and then starting it up again.
I owe you! I´ve been struggling with the same problem since I got the drone. Could only connect it to an ipad! (have no iphone). But now it works! Thank you thank you thank you!
Wow I tried your method and it works. OMG I was getting really annoyed and frustrated how sometime I can connect and other times no luck. I tried all sorts of different methods/routine, but still did not work until your method. Thanks for the research.
Doug Tang I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
Hi I have zino2+ and I'm having trouble with it when I open the app and instead of going to zino2+ it's stuck to zino2 and not giving me any other option to change the drone and if I try to change it, it automatically come back to zino2 option to enter the device and if I enter the device it say return to reselect. Idk what to do if you know let me know
Do my cellphone needs to have 5.0g wifi to work correctly? My phone only has 2.4g and I dont know if I'm going to be able to connect it. Thaks, regards from Mexico.
I have just got Zino. Updated app on my phone & I have to connect like you have shown. People can connect & fly just using phone as controler. Do you have WiFi or mobile data turned on when you fly?
I did that (flying with the phone as controller) and regret I did. The connection was lost almost immediately and the zino entered into the RTH mode, but landed on a tree. It ended crashing.
I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
@@martinflawless675 you could try... -Repairing the drone with the controller. -updating the drone firmware
3 года назад
My hubsan zino pro doesn't connect to the computer so I can't update the software. I've changed the USB cable, used it on different USB ports, and tried it on multiple computers to no avail. Drone is still flying normally, some functions cannot be performed such as panorama shooting..., it requires updating. Please tell me how to help. Thank you, sir.
You have the startup backwards and the correct startup is in the apps tutorial. Connect phone to controller. The problem isn't app starting. Once connected turn on controller. Lastly turn on drone. Like RC anything, controller first then aircraft.
Thanks for the video, but I don't think you need all these steps. I've had similar issues when connecting with my Samsung S8. What I figured out is I power up the drone and controller, then start the app manually on the phone and enter the interface, then LASTLY connect the USB cable to the phone. It establishes an immediate connection every time. No need to close and restart the app. Maybe this will work for other Android users.
hi cuttis i have android phone samsung galaxy a50 with new hubsan zhino 2 drone - can you please list steps i need to take in a row. app doesnt auto initiate on mine
Try this first, make sure you have the latest software updates. 1. Turn on Hubsan Drone 2. Turn on Remote and wait for it to stop blinking 3. Connect your remote to phone 4. If your phone auto connects to hubsan app, then close it out and ensure it is not an active app 5. open your Hubsan app 6. Follow the necessary prompts 6. This should work 7. It has worked for me every time following this method. With the new Hubsan updates, I am not having these issues anymore. I hope this helps. Remember to all, I spent many hours attempting to solve this issue. My intent is to help you solve a problem in just over 10 minutes of your life, not many days. I was attempting to help those with this issue finally connect to a great drone. I received many frustrating emails, communicating with techs from China that were doing their best to help me solve this problem. I figure 10 minutes is saving days or weeks like I did. Just trying to help. If you have any more questions, I will see what I can do to help. Let me know!!!
mine does not auto initiate. However USB connection opens a dialog .. MTP, camera & MIDI .. I choose MIDI .. still not properly connected to transmitter. PLS help. Thanks
HI, I ve just bought Zino and cant connect my iphone with Transmitter. I tried many times with correct order e.g: first drone , than transmitter and finally iphone but it didnt workout. I am totally helpless and dont know what to do, please advice. Thanks in advance, Tom
Turn on the drone, then turn on the controller. Connect jumper to controller. Do not connect jumper to phone. Open Hubsan app on phone, then connect jumper to phone. Bind aircraft to current device will appear on phone screen, bind aircraft! Then GPS accuracy! That's all there is to it!
Thanks for the comment! I have followed this description as much as possible. I haven't had a chance to try since the change in my android phone app. I will let you know if it works.
Hi Curtis, great video! I just received my Hubsan Zino Pro and have connected it to my phone and the controller. The first screen that pops up on the phone says "Improve GPS fault detection. In order to improve the flight experience, please download the latest flight control software (V1.0.17 and above) from Hubsan's official website before continuing to use it". Before I continue, I must inform you that I don't have one of those SD cards installed in the drone although I have one on order. So, Can I upgrade the software now, and why should I have to when I just downloaded the app to my phone? Also, can the upgrade be initiated without the card I just ordered or should I wait till it arrives then do the upgrade? Last but not least, how do I remove that Upgrade message from the screen? Below it it says "back" and when I push it it takes me back to the start up tutorial......... As a side note, in the upper left hand corner of the screen it says "Ready to fly".........Thanks for your help.
Nice to hear from you and hope you enjoy your hubsan, like I do mine.I do not have the Hubsan pro, but from what I hear they are very similar, except minor things. 1. You need your SD Card to capture video and pictures that you take from your zino. This shouldn't impact the flight control software download. 2. I would upgrade the software. This is not for your phone, but to upgrade the drone control. I would check other youTube videos on how to do this. There are great ones that take you step-by-step. Sorry I don't have the link available. 3. When you upgrade your flight control software, then the message should disappear. I hope this helps ! Good Flying!!!
Mark McCathren I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
Hi Chris. I have followed your RUclips channel when I was making my purchase of the Zino H117S. After about 3 weeks of use, the Remote Control went into a boot loop, which you have explained very clearly how to fix. However, it seems my RC is a slightly different model ... it has no pins for jumping. I also noticed that the Hubsan Website no longer has the "1.1 new" upgrade zip. So I am quite stuck in the loop, depending solely on the X-Hubsan App to operate the quad. But this has serious distance limitations ... I can't fly > 50m height or >150m length. Any help?
So sorry to hear! I would help, but if it is not the same controller, then I am cannot help. Check out the QC guy RUclips channel. He may be able to help. I found a telephone number for Hubsan in California and talked with Maria. She tried to help.
Thank you so much I was so frustrated because it keep saying there was no connection between phone and controller and I did what you said and it works perfect.. I have a question have you updated the firmware yet i want to try it but don't know how too
Hi ! Thanks for the video ! I've got the same problem (black screen instead of camera vision...) I tried just like you and it works ! BUT for few secondes only (10-30sec) Do you have any other Idea? I have a Samsung S8 ....
I just got my new mini se yesterday and it does not auto start the app. I had returned 2 mini pros because of the same problem but apparently hubsan has fixed it in the mini se.
noted you only had two lights lit on your controller... only half charge... probably not the problem...but should be a warning to you to have four full lights before you go out and fly.... check every time before you take off. thanks.
OMG, didn't you mention that you allowed the "autostart" as you entered the App first? You can easily stop this behaviour in switch off the autostart of the Hubsan App. After doing this everything is running as you got it with the I-phone. It's not a Hubsan issue it's an issue of Android. Fair winds Tom
@@stephaneboudreau1088 in Android 9 it is: Settings Apps Rights In other versions you can switch off it as well. Don't confirm "Start App when USB is connected/used. IMPORTANT Switch on developers mode. Settings System Additional settings Fair winds Tom
You could have just plugged the phone back in again. That is why most users start the drone... start the controller. start the App (enter main frame)... then plug in phone.
Thanks Curtis. Just got a zino from a guy who's upgrading to a real drone. Can't get my zino controller to connect to any of the android devices I have. Even when I follow your tip. Would you be able to check in the two finger pull down menu , which usb mode your android is using for the zino. Mine has 4 options. Cheers
Saya mengalami hal yg sama aircraft tdk berfungsi hp ke remote tdk connect. Saya sdh berulang kali mencoba tetap gagal. Apa kah harus pakai iPhone baru bagus??
I've got a Samsung Galaxy S7 and plugging the data cable into it from the controller does nothing- no app, no change in blue LEDs, and definitely no connection that lets me control the drone. Is there a way to fix this?
Too much blabla before you come to the solution. But it is no solution, my Zino Pro disconnects during flight many times because the smartphone is charged from the controller. And a smartphone has a much bigger accu than the controller.
First you need to open app manually before al the rest or drone will connect to your phone instead of the app. After opening app and connect cable then you can start up the drone and TX
I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
I'm having issues with this too. I have successfully connected a few times the zino, the controller, and the phone all toghether (LG by the way). I don't know why this workaround just doesn't work all the time. Yesterday it took me like 40 minutes just to bind everything and start flying. A pain.
Thanks for the comment! Sorry to hear how long it takes to connect. I had same issue. Did you follow what I showed you in the video? If your hubsan app autostarts without you clicking on the app. This was the issue for me. Just close out of the hubsan app, and clear it in your mobile phone history. Then click on the hubsan app. It should work. It has been working for me, since I have been doing this. Hope this helps.
![Hubsan Zino - Conectar a la primera con la APP [En Español] - Episodio 07](http://i.ytimg.com/vi/68kIACS23lY/mqdefault.jpg)
On behalf of many frustrated Android users, I want to thank you for the video. I am having no trouble connectng now with my Android phone. When I go in manually, after the automatic start, this things pops. No hesitation at all. Again thanks for sharing this video.
Very kind to share this , don't have my drone yet , but searching for android issues...this is comforting, thank you...
Bonjour Curtis, I am very grateful or your video I realized I had the same problem with my Zino pro and, now my drone is OK so thanks a million
Thanks a lot pal you don’t know I how long I have had trouble with the ZINO firmware.I updated the firmware last week everything worked but Android.I was looking for help on RUclips and I saw your tutorial ,I watched it several times and yes it works fantastic first time . Thanks Mate I can’t believe it
Thank you so much for ending my frustration. I also tried starting the app and entering the main screen prior connecting to usb; it works
Can you just get to the fix already
I don't care what anybody else thinks about you because I think you are all right , thank you for keeping me from breaking my Zino pro plus worked just like your video say's still F''ing with my mind but dose work SMH ;)
I have the same issue.. it really is frustrating.. there was a time that it took almost an hour before i was able to fly my zino because of this issue.. This vid is helpful.. thanks
Yes, same issue with my Moto. Thanks for this video!
You sir area bloody hero😊
You opened our eyes... You were the first to know... You are our hero... A miracle happened!!! etc.: -)))
You might be surprised, but this was already 3 months warned ALL owners Hubsan Zino - what everyone needs to always connect the USB cable to the smartphone only after pairing the remote control with the quadcopter. :-) -) The need to connect the smartphone is the last (to the console) has long been known in ALL forums in the world... :-)
I followed that process every time! The problem is for android phones, like mentioned in the video is that my controller wasn't connected to the drone. The app that automatically starts after connecting the txt cable from controller to phone was the problem. Once again, this is a fix for those having the same problems. I have tried searching all over Hudsan Zino forums and could not find anything, as well as trying to connect with people and they did not know how to fix the problem. That is why I finally connected with Hubsan for their help. Fortunately, I figured out the problem. Sorry if this doesn't apply to your situation. Thanks for the comment!!!
I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
I have this problem on my iPhone 8 with my Zino 2. I can’t wait to try your advice! Thank you!
Hi! I was hoping that your method would fix my issue. I am not sure if the Drone itself, or the controller puts out the wifi signal for the phone to pick up, but after the upgrade, the drone went from awesome, to sucks. I really regret doing the upgrade, because it worked pretty decent prior. I am not getting a WIFI signal from the drone since doing the upgrades to the firmware. Any Ideas?
thanks your video was very helpful 👍
For "Android phone " how to connect the drone.
Step 1:
Go to the Settings on your device and go into System
Step 2:
Go to "About Phone" and click on "Version Number" then you will see the device is
already in Developer Mode.
Step 3:
Go back to "System" and go to "Developer Options"
Step 4:
Turn on the "USB Debugging" Mode.
Step5:
（1）Long press the power button on the transmitter, run the X-Hubsan APP and use the
adapter cable to connect the HT016B transmitter to the mobile device.
For USB connection Mode, use the default "Charging Only" option.
（2）Confirm to use the USB in X-Hubsan.
John Sabrina I have that problem and I tried to do these steps but It still doesn t work..in which sense "confirm to using the usb in x-Hubsan?
I for one didn't see the forum posts, so I appreciate this video. I have been having some problems with my drone as well, and this video resolved that. Thank you!
too bad that in reality You have not read the main forums Hubsan Zino (only 4 now), there are many necessary and interesting...
for example:
www.rcgroups.com/forums/showthread.php?3140448-Hubsan-Zino-4K-camera-3-axis-gimbal-foldable-design/page1
facebook.com/groups/HubsanQC/
Kolya Ptap4uk I appreciate the link, I am sure this video will help others like me who didn’t know about the forums
Dude, it was sooooo looooong... But thanks! It has worked!
Hi Chris, I just took the plunge and decided to update my controller firmware. Everything seemed to go ok as per your video, but now I can't get the remote to pair to my phone. The 4 blue LEDs flash continually in sequence and never go constant to indicate battery life. I'm pretty sure the cable is ok as it charges. Any ideas??
Sounds like the controller is not booting up. Stuck in a loop.
Try burning the firmware again... If it's not bricked.
Thanks... that was helpful. What I did find is if I power up the transmitter after the transmitter is connected to my android phone, the app is loaded and can successfully enter the main menu... a little more efficient than closing app and then starting it up again.
David, thanks for info.
I owe you! I´ve been struggling with the same problem since I got the drone. Could only connect it to an ipad! (have no iphone). But now it works! Thank you thank you thank you!
Wow I tried your method and it works. OMG I was getting really annoyed and frustrated how sometime I can connect and other times no luck. I tried all sorts of different methods/routine, but still did not work until your method. Thanks for the research.
Doug Tang I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
Hi I have zino2+ and I'm having trouble with it when I open the app and instead of going to zino2+ it's stuck to zino2 and not giving me any other option to change the drone and if I try to change it, it automatically come back to zino2 option to enter the device and if I enter the device it say return to reselect.
Idk what to do if you know let me know
Is there an active hubsan group where I can find assistance with the drone? Many thanks
My phone support 802.11ac. Do i need to use cable to connect to controller?
Hey bro, I have the same phone you do and, ( had the same issue). Sweet tip, thank you.
What is the phone model, LG what?
Do my cellphone needs to have 5.0g wifi to work correctly? My phone only has 2.4g and I dont know if I'm going to be able to connect it. Thaks, regards from Mexico.
I have just got Zino. Updated app on my phone & I have to connect like you have shown.
People can connect & fly just using phone as controler.
Do you have WiFi or mobile data turned on when you fly?
Thanks for question. I use the WiFi. My mobile data was being used, but had no difference whether on or off.
I did that (flying with the phone as controller) and regret I did. The connection was lost almost immediately and the zino entered into the RTH mode, but landed on a tree. It ended crashing.
I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
@@martinflawless675 you could try...
-Repairing the drone with the controller.
-updating the drone firmware
My hubsan zino pro doesn't connect to the computer so I can't update the software. I've changed the USB cable, used it on different USB ports, and tried it on multiple computers to no avail. Drone is still flying normally, some functions cannot be performed such as panorama shooting..., it requires updating. Please tell me how to help. Thank you, sir.
You have the startup backwards and the correct startup is in the apps tutorial. Connect phone to controller. The problem isn't app starting. Once connected turn on controller. Lastly turn on drone. Like RC anything, controller first then aircraft.
Thanks for the video, but I don't think you need all these steps. I've had similar issues when connecting with my Samsung S8. What I figured out is I power up the drone and controller, then start the app manually on the phone and enter the interface, then LASTLY connect the USB cable to the phone. It establishes an immediate connection every time. No need to close and restart the app. Maybe this will work for other Android users.
Cheers dude, will try that :)
Thank you,video helped!!!!!
hi cuttis i have android phone samsung galaxy a50 with new hubsan zhino 2 drone - can you please list steps i need to take in a row. app doesnt auto initiate on mine
Try this first, make sure you have the latest software updates. 1. Turn on Hubsan Drone 2. Turn on Remote and wait for it to stop blinking 3. Connect your remote to phone 4. If your phone auto connects to hubsan app, then close it out and ensure it is not an active app 5. open your Hubsan app 6. Follow the necessary prompts 6. This should work 7. It has worked for me every time following this method. With the new Hubsan updates, I am not having these issues anymore. I hope this helps. Remember to all, I spent many hours attempting to solve this issue. My intent is to help you solve a problem in just over 10 minutes of your life, not many days. I was attempting to help those with this issue finally connect to a great drone. I received many frustrating emails, communicating with techs from China that were doing their best to help me solve this problem. I figure 10 minutes is saving days or weeks like I did. Just trying to help.
If you have any more questions, I will see what I can do to help. Let me know!!!
doesn't work for me. I also reinstalled the app and still the same issue 'USB is not connected' after 10 seconds of working... any other ideas?
mine does not auto initiate. However USB connection opens a dialog .. MTP, camera & MIDI .. I choose MIDI .. still not properly connected to transmitter. PLS help. Thanks
My android does the same as yours...
If I crack the problem, I will say how in these comments.
ZINO vs DJI Mavic Mini, which one would you choose?
HI,
I ve just bought Zino and cant connect my iphone with Transmitter.
I tried many times with correct order e.g: first drone , than transmitter and finally iphone but it didnt workout.
I am totally helpless and dont know what to do, please advice.
Thanks in advance,
Tom
Zino pro is always showing aircraft disconnected… any help will be appreciated…
Turn on the drone, then turn on the controller. Connect jumper to controller. Do not connect jumper to phone. Open Hubsan app on phone, then connect jumper to phone. Bind aircraft to current device will appear on phone screen, bind aircraft! Then GPS accuracy! That's all there is to it!
That's the most sensible explanation. Thanks.
Here's a long shot - find your 'default apps' setting and see if the Hubsan app is there. If it is, clear the default.
Thanks for the comment! I have followed this description as much as possible. I haven't had a chance to try since the change in my android phone app. I will let you know if it works.
Hi Curtis, great video! I just received my Hubsan Zino Pro and have connected it to my phone and the controller.
The first screen that pops up on the phone says "Improve GPS fault detection. In order to improve the flight experience, please download the latest flight control software (V1.0.17 and above) from Hubsan's official website before continuing to use it".
Before I continue, I must inform you that I don't have one of those SD cards installed in the drone although I have one on order.
So, Can I upgrade the software now, and why should I have to when I just downloaded the app to my phone? Also, can the upgrade be initiated without the card I just ordered or should I wait till it arrives then do the upgrade?
Last but not least, how do I remove that Upgrade message from the screen? Below it it says "back" and when I push it it takes me back to the start up tutorial.........
As a side note, in the upper left hand corner of the screen it says "Ready to fly".........Thanks for your help.
Nice to hear from you and hope you enjoy your hubsan, like I do mine.I do not have the Hubsan pro, but from what I hear they are very similar, except minor things. 1. You need your SD Card to capture video and pictures that you take from your zino. This shouldn't impact the flight control software download. 2. I would upgrade the software. This is not for your phone, but to upgrade the drone control. I would check other youTube videos on how to do this. There are great ones that take you step-by-step. Sorry I don't have the link available. 3. When you upgrade your flight control software, then the message should disappear. I hope this helps ! Good Flying!!!
@@curtissmith2797 Great, thank you for your prompt response Curtis.......
Worked for me...Thanks!!!!
Mark McCathren I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
It's a setting you can change in the software. Not a problem just deselect it auto starting the app.
Hi Chris. I have followed your RUclips channel when I was making my purchase of the Zino H117S. After about 3 weeks of use, the Remote Control went into a boot loop, which you have explained very clearly how to fix. However, it seems my RC is a slightly different model ... it has no pins for jumping. I also noticed that the Hubsan Website no longer has the "1.1 new" upgrade zip. So I am quite stuck in the loop, depending solely on the X-Hubsan App to operate the quad. But this has serious distance limitations ... I can't fly > 50m height or >150m length. Any help?
So sorry to hear! I would help, but if it is not the same controller, then I am cannot help. Check out the QC guy RUclips channel. He may be able to help. I found a telephone number for Hubsan in California and talked with Maria. She tried to help.
Here is a link to QC, haven't watch it yet but it about boot-loop on the controller ruclips.net/video/MhWslnsMIRA/видео.html
Thank you so much I was so frustrated because it keep saying there was no connection between phone and controller and I did what you said and it works perfect.. I have a question have you updated the firmware yet i want to try it but don't know how too
Hi ! Thanks for the video !
I've got the same problem (black screen instead of camera vision...)
I tried just like you and it works !
BUT for few secondes only (10-30sec)
Do you have any other Idea?
I have a Samsung S8 ....
I just got my new mini se yesterday and it does not auto start the app. I had returned 2 mini pros because of the same problem but apparently hubsan has fixed it in the mini se.
Cap, can I use smartphone 2,4 ghz for Fpv?
as i understand your phone must be 5G capable
noted you only had two lights lit on your controller... only half charge... probably not the problem...but should be a warning to you to have four full lights before you go out and fly.... check every time before you take off. thanks.
OMG, didn't you mention that you allowed the "autostart" as you entered the App first? You can easily stop this behaviour in switch off the autostart of the Hubsan App. After doing this everything is running as you got it with the I-phone.
It's not a Hubsan issue it's an issue of Android.
Fair winds
Tom
How to you disable the autostart?
@@stephaneboudreau1088 in Android 9 it is:
Settings
Apps
Rights
In other versions you can switch off it as well. Don't confirm "Start App when USB is connected/used.
IMPORTANT
Switch on developers mode.
Settings
System
Additional settings
Fair winds
Tom
it not the apps its how you select the USB on the Android phone, MTP or media only, should select the all media
You could have just plugged the phone back in again. That is why most users start the drone... start the controller. start the App (enter main frame)... then plug in phone.
Great comment! I will have to try that and see if it works.
Does anyone know why is it that Hubsan mini pro drone connects to apple devices much easier than to Android?
sorry but it did not work for me , still USB cable is not connected
Good god this video could have been done in 3 minutes! GEEEEZUS
Saying "restart the app" shouldn't even deserve a own video..
Thanks Curtis.
Just got a zino from a guy who's upgrading to a real drone.
Can't get my zino controller to connect to any of the android devices I have.
Even when I follow your tip.
Would you be able to check in the two finger pull down menu , which usb mode your android is using for the zino. Mine has 4 options.
Cheers
J'ai le même problème depuis peu mais rien n'y fait impossible de connecter
Saya mengalami hal yg sama aircraft tdk berfungsi hp ke remote tdk connect. Saya sdh berulang kali mencoba tetap gagal. Apa kah harus pakai iPhone baru bagus??
you took almost 8 freaking minutes to tell us how to fix the problem EIGHT MINUTES , next time just show us without the long SLOW explanation , THANKS
You truly are a fricking dick. Same type of an answer you gave to me on a FB post. How's you Zino flying now dickweed. LOL...LOL
hey , you are too lazy to click on your mouse!!!
Relax/and breath slowly.
(And drink less coffee and energy drinks)
Try a little gratitude!?!?
I've got a Samsung Galaxy S7 and plugging the data cable into it from the controller does nothing- no app, no change in blue LEDs, and definitely no connection that lets me control the drone. Is there a way to fix this?
There's always phone on with controller off and cable connected. Then open app then turn controller on and then turn drone on.
I'm having a nightmare connecting mine!!
Top 👏👏👏
Too much blabla before you come to the solution. But it is no solution, my Zino Pro disconnects during flight many times because the smartphone is charged from the controller. And a smartphone has a much bigger accu than the controller.
I have a hubsan drone I suffer a lot for control to connect On my drone
Amazing how saying "restart the app" can take 11 minutes..
First you need to open app manually before al the rest or drone will connect to your phone instead of the app. After opening app and connect cable then you can start up the drone and TX
Thanks
I’m having a issue with my Zino the aircraft won’t connect every time I power on the Zino it comes on but the camera doesn’t flip out any advice I tried contacting Hubsan there self through email and phone but no one never picks up and responds please help me
I'm having issues with this too. I have successfully connected a few times the zino, the controller, and the phone all toghether (LG by the way). I don't know why this workaround just doesn't work all the time. Yesterday it took me like 40 minutes just to bind everything and start flying. A pain.
Thanks for the comment! Sorry to hear how long it takes to connect. I had same issue. Did you follow what I showed you in the video? If your hubsan app autostarts without you clicking on the app. This was the issue for me. Just close out of the hubsan app, and clear it in your mobile phone history. Then click on the hubsan app. It should work. It has been working for me, since I have been doing this. Hope this helps.
@@curtissmith2797 thank you for the reply. Yes, I have tried what you show in the video. Sadly, It works only sometimes.
I have send problem
Cabo flat de vídeo com defeito
FFS, you could have fitted that info into a 2 minute video instead of droning on for ages
Any one knows the hubsan wifi password in order download the pictures from the aircraft to the cellphone? ??
I just tippet 12345678 and it worked🤷
Nice pants... LOL!!!!!!!!!
fake solition for still not connected
a lot of text!
Folowme desconect next aplicación and conect 🧟♂️🤷🏽♂️
Boring!
lol ...android...