Fun fact: The Gear Cube was originally called the Danger Cube, because the gears were sharp, and Oskar van Deventer, the creator of the puzzle, kept cutting himself by getting his fingers pinched between the gears.
I also solved gear cube myself and a "breakthrough" moment was when I realized that every gear has 6 teeth, and 6 is not divisible by four... so turning a single side 8 times makes the cube "correct" but with gears 1/3 turns wrong... one more tome and it's 2/3, and the last time it goes back to normal.
The 3x3 gear cube may be an easy solve but it's by far the COOLEST looking cube when you turn it! If anyone comes to your house to visit, just hand the gear cube to them and say "check this out!" They will immediately want to play with it and be mesmerized by the little turning gears. It's difficult to put it down.
@@skilllessbeast7416 I think it's just the same as something like a mirror cube where you just need to solve it according to shape, it still is of course a lot harder than a mirror cube
Way back when I first started cubing, I spent a few weeks trying to solve the 3x3 without any help. I got the 1st two layers down and I could move some things around on the last layer but I just couldn't get any farther and finally gave up and looked it up. I've always felt lame for having given up on the original 3x3 so now, my whole approach is to figure every new puzzle out without any help no matter what. It's so much more rewarding. Even if my original solution is trash and I end up looking up better ones online _after_ I solve it myself at least once 😛
The gear cube is actually really easy to solve. He did the first step right of solving the corners, but then he started trying to get it into a cube shape which is what you do at the end
I enjoyed watching you trying to solve a brand new puzzle, even though you couldn’t. I suggest you do more videos solving deferent puzzles and explain your thinking progress
@@cryolite08 But you are taught how to do it, and even then it can be confusing. For a puzzle that is really really simple, all you do is turn one of the 6 sides of a cube, actually figuring out how to do that is too hard. Rubik took a whole month, and not only did he invent it, but he is also pretty smart.
I recently bought the Gear family and also my pyraminx got misaligned two times and like you, I had to reassemble the whole thing, seems like if you force the turns, it happens, you need to twist it gently, get the cogs in motion and then you can turn it a little faster
For someone who claims to not be a puzzle enthusiast, you're amazing at intuitively solving strange puzzles! You're my favorite cubing RUclipsr, and J perm is my favorite PLL (even though I use a much different alg, please don't hate me)
Hi Dylan. I just wanted to tell you that I have watched your videos and tutorials since I started cubing (a bit less than 3 months ago) and I really enjoy them. I recently taught one of my friends 2-look OLL and 2-look PLL, and I used your way of explaining in your videos (as well as my own ways) to teach him, and he learned it in two days. He was impressed by how fast I could turn and solve the cube (even though I’m averaging around 25 seconds), and that’s why he wanted to learn some of those algorithms. Anyways, I like teaching people stuff I know since it makes me learn it better and we can have a good time together, and when I’m teaching people the Rubik’s cube your videos are extremely helpful, since I learned almost everything I can from you.
Jperm: Can I solve these weird puzzles? Me: yes you can. a week Later Jperm: Can I solve them using only jperms? Me: Heck you can ! 2 weeks later Jperm: Can I solve them using only double moves? Me: Yeah I know, I know 3 weeks later Jperm: Can I Solve them one side at a time? Me: seriously? 4 weeks later Jperm: Can I solve them using 3 style? Me: ......... 🤦♂️ A month later Jperm: Why I decided to quit weird puzzles.. Me: Now we're talking
for you Brawl Stars fans out there: J Perm - KairosTime Gaming (tier lists/in-depth videos) Cubing Encoded - Coach Cory (reactions, i.e. memes, plays, etc.) Tingman - Lex (family videos/unique videos) Z3 Cubing - Rey (glitches and weird challenges) JRCuber - BenTimm1 (i don't know why, they just seem similar) Brody the Cuber - Ash Brawl Stars (pro tips) Lazer0Monkey - no idea TheCubicle/SpeedCubeShop - Tribe Gaming (i think you see what i mean) pro cubers- pros of Brawl Stars OJ and Chief Pat get their own special place please comment any other cubers/Brawl Stars relationships i can't think of anymore
My state in Australia: has a physical competition because of good lockdown procedures Other state in Australia: *MAN REFUSES TO LEAVE A KFC STORE WHILE PLAYING POKÈMON GO, GETS CORONAVIRUS*
I have a cool fact:- All the 6 nxn puzzles are made by the top 6 cubing companies [These are just my opinions] 2x2-Dayan [Tengyun M] 3x3-Gan [356 XS] 4x4-Moyu [Aosu WR M] 5x5-Qiyi [Valk 5 M] 6x6-YJ [MGC] 7x7-Yuxin [Hays 7 M]
This is a MeiLong Clover , not the QiYi clover that Z3 Cubing showed. The QiYi one only turns like a curvy copter. The Meilong solves like a 3x3. From the speedcubeshop description: The MoFang JiaoShi MeiLong Clover is a super fun 3x3 modification! If you are looking to venture into the world of shape mods, this is a great starting point as it solves the same way as a traditional 3x3 cube! speedcubeshop.com/products/mofang-jiaoshi-meilong-clover-3x3
This is a horrific version of the clock, because you need to match the good edges with the bad edges and solve them all, but it's way harder than it looks and sounds
The gear cube is pretty easy to solve if you do it randomly lol, when i was new to cubing one friend had brought a gear cube and i scrambled it and solved it in 2 mins xd, my another friend who didn't know cubing at all except the sexy move also did it in a few mins
I have a gear cube that I can’t figure out how to solve. It is different from the one you showed. The official name is David’s gear cube. Some tips or hints might be nice. 🤨🤔 And by the way. Awesome videos! It’s cool seeing you play with all those amazing rubix puzzles. Keep up the good work. 👍
I never know which puzzles to get when I'm at the shop. Often they end up being way easier than they look and then I feel like Im just throwing money down the drain.
I have hopes that Dylan can surely do even more of these. But this channel looks good with just the concise and informative tutorials. Anyways I like these kind of unboxings and solves! Keep Going J Perm. Great content!😍😍
i'm glad youre trying this out, because personally i dont really enjoy speedcubing that much but solving weird puzzles at my own pace is very enjoyable for me
Just FYI, the Ivy Cube is just a pyra, which is why you can do the Sune-like alg like pyra that cycles 3 edges The gear cube can be solved by solving the corners and then using 2 algs i wont spoil if u want to figure it out
You are doing the best unboxing videos for cube thank you for making the unboxing videos I am blessing to you to make a easy 3 by 3 Rubik's Cube tutorial
The ivy cube is really easy to solve l solved it by my own and u know after solving the cube again and again l watched some tutorial videos and it was like my own method. And l didn’t even know the name of the cube l just bought and try to solve it and it solved but surprisingly the tutorials were like my own method. But honestly u made it really hard to solve the ivy cube.
For the 2x2x3, when you need to swap the two middle edges, just do R2 E2 R2 The Coin Pyraminx is like an Ivy Cube in a Pyraminx. J Perm really needs to work on his non-WCA solving skills.
I INVENTED A 2x2 ALGORITHM!!! It is technically a V-Perm on a 3x3, except (U' D) move set. when we reach the U' D set of moves, I turned the cube left and continued the algorithm. This only works when, on the yellow side, two pieces that are diagonal to each other are solved, and the other two aren't solved. I held the cube near one solved piece and did the alg.
Fun fact: The Gear Cube was originally called the Danger Cube, because the gears were sharp, and Oskar van Deventer, the creator of the puzzle, kept cutting himself by getting his fingers pinched between the gears.
Oof the last part
Bruh what lol
that’s hilarious lol
Ouch!
Really?
Jperms left brain: "That's impossible"
Jperms right brain: "That's not possible"
Jperm: "That's not impossible"
Clever
I like this
Hi
Good one.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣roflrofl
Jperm: I'm not going to solve it like a pyraminx
Also Jperm: Solves it like a pyraminx
Nice!
I’m not going to like this comment just because it has the perfect number of likes
@BTS xtreme fan lol
Lol
goddang it guys
Why did u like
Being able to solve a gear cube it was hilarious how dedicated he was to keeping the cube shape, like you can just fix that all at the very end...
I also solved gear cube myself and a "breakthrough" moment was when I realized that every gear has 6 teeth, and 6 is not divisible by four... so turning a single side 8 times makes the cube "correct" but with gears 1/3 turns wrong... one more tome and it's 2/3, and the last time it goes back to normal.
@Ryandal Gilmore yeah i also figured that out
...
@@zlac um yes i understood everything you said....
@@zlac yea man me too
I was like: HE DOESN'T KNOW LOL
That feeling when you can see a more efficient way of solving the puzzle
In all seriousness, you're really skilled at cubing. Great video!
Ikr
yeah it's to be expected if you have a ton of experience.
Also the feeling when u know how to solve a cube faster than j perm
I solved a gear cude in 6 seconds idk how
@@Bluefire.1407 i'm not suprised that you don't know, becauss how the fu-
They really missed an opportunity to call it a "Gearaminx"
Yes
I gear what you're sayin'
I KEEP SAYING THAT IO MYSELF SO TRUEEEE
lol
I thought of the same thing of what you thought of.
"Lack of expyraminx"
JPerm - 2020
that was gold
Amazing quote
lol me
yeah I got it too
I love the fact that he laughed to himself before he made his pun, like a congratulatory "I'm so funny"
The marry it, ir do you just like it?
@@sotaveturi wow ok your joke was even worse.
10:13
@@sotaveturi i don't
what
Timestamp?
When someone solves a puzzle with no tutorial and you can’t solve it with a tutorial.
It's J Perm
Gear cube (of this type) uses just one algorithm for solve. In fact, one can solve them by just randomly rotating it.
@@martinazivko524 I know I can solve it lol 😂
That's why we're watching this
@@martinazivko524 I made my own algorithm on gear cube based on a 3x3 alg but 90% of the time it doesn't work and I have to scramble the cube again
The 3x3 gear cube may be an easy solve but it's by far the COOLEST looking cube when you turn it! If anyone comes to your house to visit, just hand the gear cube to them and say "check this out!"
They will immediately want to play with it and be mesmerized by the little turning gears.
It's difficult to put it down.
I honestly want one so bad after seeing it, too bad they're not sold where I live
they’re also painful 😂😂
13:34 I love how he makes himself laugh when he realizes he could make a pun
Now J perm has more “experaminx”
actually he said experiminx as in experience not experaence
No
@@abcdefghijklmnopqrstuvwxyandz8 Name
Good pun UMCuber
Yeah
Ok let’s be honest Jperm is making cubing better for all of us at this time
He always has
Jperm never had done anything that make cubing hard
Plot twist : he did
True
Yup
The ivy cube looks like the back of a uno card.
Oh yeah!!
5:10
Can’t unsee now
Oh no...
*Oh no...*
*WHAT HAVE YOU DONE?!?*
Lmao
Try the ghost cube definitely one of the hardest 3x3 shape mods. I’d love to see you do it👍
It’s pretty easy imo, I think J perm would find out how to do it the same way I did
But you can do normal 3x3 algs, can't you?
@@skilllessbeast7416 I think it's just the same as something like a mirror cube where you just need to solve it according to shape, it still is of course a lot harder than a mirror cube
oh god, i have a ghost cube and i still don’t know how to solve it
i’d love to see jperm do it
@@kienfudge3638 the same way you did it? It's a 3x3, there isn't exactly a special way to do it
Way back when I first started cubing, I spent a few weeks trying to solve the 3x3 without any help. I got the 1st two layers down and I could move some things around on the last layer but I just couldn't get any farther and finally gave up and looked it up.
I've always felt lame for having given up on the original 3x3 so now, my whole approach is to figure every new puzzle out without any help no matter what. It's so much more rewarding. Even if my original solution is trash and I end up looking up better ones online _after_ I solve it myself at least once 😛
I actually solved cubes all the way till 11x11 and pyraminx without any help (ofc I took help for 3x3)
And it was very satisfying
The gear cube is actually really easy to solve. He did the first step right of solving the corners, but then he started trying to get it into a cube shape which is what you do at the end
I enjoyed watching you trying to solve a brand new puzzle, even though you couldn’t. I suggest you do more videos solving deferent puzzles and explain your thinking progress
As someone who can’t solve a simple cube watching people solve these more complex puzzles and shapes is so impressive
You would be surprised how insanely difficult the 3x3 Rubik's cube is. Like, it genuinely is extremely challenging with no help.
@@cryolite08 But you are taught how to do it, and even then it can be confusing.
For a puzzle that is really really simple, all you do is turn one of the 6 sides of a cube, actually figuring out how to do that is too hard. Rubik took a whole month, and not only did he invent it, but he is also pretty smart.
Jperm: I'm not sure if this works
*5min* later : yeah so the cubes solved
13:38 was the best thing i ever heard
As someone who taught my self to sold a gear cube, I’m laughing at how much he overthinks it. It’s actually a lot simpler then he made
Wdym?
@@midea.6490 you don’t need to worry about keeping it in a cube shape until the end
@@midea.6490 keeping cube shaping isnt needed as you can fixi it at the end
The sight of the gear cube after he scrambles it still gives me nighmares
Hey jperm, would you rather
A.Get a jperm every time you solve
B.Get PLL skip every two times you solve?
I AM not jperm but i would rather A
B, if u use ols you could regularly break wr
A
b cos japerm is bad
@@Bob-uh9fw TRAITOR
I recently bought the Gear family and also my pyraminx got misaligned two times and like you, I had to reassemble the whole thing, seems like if you force the turns, it happens, you need to twist it gently, get the cogs in motion and then you can turn it a little faster
For someone who claims to not be a puzzle enthusiast, you're amazing at intuitively solving strange puzzles!
You're my favorite cubing RUclipsr, and J perm is my favorite PLL (even though I use a much different alg, please don't hate me)
For the gear pyraminx, I would match up the small centre pieces in order to get a good shape.
Hi Dylan. I just wanted to tell you that I have watched your videos and tutorials since I started cubing (a bit less than 3 months ago) and I really enjoy them. I recently taught one of my friends 2-look OLL and 2-look PLL, and I used your way of explaining in your videos (as well as my own ways) to teach him, and he learned it in two days.
He was impressed by how fast I could turn and solve the cube (even though I’m averaging around 25 seconds), and that’s why he wanted to learn some of those algorithms.
Anyways, I like teaching people stuff I know since it makes me learn it better and we can have a good time together, and when I’m teaching people the Rubik’s cube your videos are extremely helpful, since I learned almost everything I can from you.
Cool story
Jperm: Can I solve these weird puzzles?
Me: yes you can.
a week Later
Jperm: Can I solve them using only jperms?
Me: Heck you can !
2 weeks later
Jperm: Can I solve them using only double moves?
Me: Yeah I know, I know
3 weeks later
Jperm: Can I Solve them one side at a time?
Me: seriously?
4 weeks later
Jperm: Can I solve them using 3 style?
Me: ......... 🤦♂️
A month later
Jperm: Why I decided to quit weird puzzles..
Me: Now we're talking
Lol
Comedy 100
4 weeks does not equal a month= lOgIc
@@phase0400
All months are not *February* s
Rip lOgIc
During quarantine, I’ve been getting faster at 3x3. I’ve learned some COLL from J Perm. Thank you for keeping my cubing career going.
4:31
Jperm: And then, BLUE HERE.
Me: CUBEORITHMS!!!!
Why I love j perm's teaching:
1. It doesn't bores me
2. He speaks in a daily life language.
3. My favourite cuber.
for you Brawl Stars fans out there:
J Perm - KairosTime Gaming (tier lists/in-depth videos)
Cubing Encoded - Coach Cory (reactions, i.e. memes, plays, etc.)
Tingman - Lex (family videos/unique videos)
Z3 Cubing - Rey (glitches and weird challenges)
JRCuber - BenTimm1 (i don't know why, they just seem similar)
Brody the Cuber - Ash Brawl Stars (pro tips)
Lazer0Monkey - no idea
TheCubicle/SpeedCubeShop - Tribe Gaming (i think you see what i mean)
pro cubers- pros of Brawl Stars
OJ and Chief Pat get their own special place
please comment any other cubers/Brawl Stars relationships i can't think of anymore
your ivy cube solve was so much more different from when i first picked up a ivy cube
What normal type of 3x3 cube would you recommend to me from the speedcubeshop?
J perm or MoYu rs3 m 2020
hi jperm! i just wanted to say congrats on 100 million views! You're nearly there!!!
My lack of "EXPYRAMINX".....
- J Perm 2020.....
😂😂🤣🤣🤣
And also the illuminati pyramimx
I read this as he said it
@@joesmith4477 🤣😂🤣😂
My state in Australia: has a physical competition because of good lockdown procedures
Other state in Australia: *MAN REFUSES TO LEAVE A KFC STORE WHILE PLAYING POKÈMON GO, GETS CORONAVIRUS*
Facts...And guess what...I'm stuck in that state. 😑
I already wanna leave America I hate it over here right now it feels like we'll never recover
Hmm 🤨 some idiots don’t understand
@@CubeDudes2009 yea
If the background in the thumbnail was blue I would have considered that the video was made by REDKB
I learned how to solve a cube from Redkb
I would regret this because It teaches you to solve red first and not white first
@@MarcTelang lol
I have a cool fact:-
All the 6 nxn puzzles are made by the top 6 cubing companies
[These are just my opinions]
2x2-Dayan [Tengyun M]
3x3-Gan [356 XS]
4x4-Moyu [Aosu WR M]
5x5-Qiyi [Valk 5 M]
6x6-YJ [MGC]
7x7-Yuxin [Hays 7 M]
Not to sound rude but...
How is this suprising?
Ofc the top cubing companies make the NxNs
Yj is Sub-brand of moyo
Andriy Peleshchyshyn ^^^
@Andriy Peleshchyshyn
Someone told this to me:
"The Spark is the best but Kevin Hays says the Hays is the Best"
No I meant to say that instead of 1 company having all or 2-3 good cubes 6 diff. Companies have the 6 diff. Puzzles
Personally, for the gear cube I just ignore cube shape until the end since that can be done by just turning the cube.
If j perm were to ever see this then he shall know he MUST DO AN AO100 on pyraminx and post it
Lmao after he brought out the normal cube while solving the gear cube
Finally, inner peace
My favorite part is when you say " lack of experiemix" lol
J perm: I'm not going to solve it like a pyraminx
Also J perm: Solves it like a pyraminx
Me: ._________.
hello!
Also you: Copy and pasted
@@SnivyTeamLeader he didn't copy and paste
@@Anant-sb9qc wait how
@@Anant-sb9qc this comment is completly original...
13:39 my lack of expyraminx 😂 😂 😂 I love dark humor
I solved the ivy cube without algorythems, it's fun
Not to be rude but you don’t spell algorithm that way.....
I cannot imagine solving these cubes by myself. Even the most easy puzzles i cannot solve myself.
Jperm is literally the best cube RUclipsr there is. Great videos (:👍🏻😁
cutuber
@@wolfyspace3368YouCuber
Jperm: uploads video 37 mins ago
Comments: 43 mins ago
Me: RUclips: BrOkEn
Or... the comments came from his patreons which probably get earlier access to the vids (like most youtubers patreons do)
When you can actually say "Did I break that" to a twisty puzzle
J Perm: The gear pyraminx gave me a nightmare
Me: bruh that looks so ez!
J Perm: Turns it
Me:
Hello I subscribed
I'm a trick shooter to
@@trickshotsmoviesandcubing2317 Oh that's awesome! I'll sub to you too (sry for late reply)
@@lutimstrickshots9253 thank you!
Your videos are too good and these tutorials keep me going.
The gear puzzles get misaligned so easily. The last step to solving an older, looser gear cube is realigning the pieces that skipped a few teeth
One of the cubes you said only turn like a 3x3 in the intro also turns as a curvy copter
@Marcel Mayer it was in one of z3 cubing's videos
This is a MeiLong Clover , not the QiYi clover that Z3 Cubing showed. The QiYi one only turns like a curvy copter.
The Meilong solves like a 3x3.
From the speedcubeshop description: The MoFang JiaoShi MeiLong Clover is a super fun 3x3 modification! If you are looking to venture into the world of shape mods, this is a great starting point as it solves the same way as a traditional 3x3 cube!
speedcubeshop.com/products/mofang-jiaoshi-meilong-clover-3x3
This is a horrific version of the clock, because you need to match the good edges with the bad edges and solve them all, but it's way harder than it looks and sounds
The gear cube is pretty easy to solve if you do it randomly lol, when i was new to cubing one friend had brought a gear cube and i scrambled it and solved it in 2 mins xd, my another friend who didn't know cubing at all except the sexy move also did it in a few mins
you actually invented your own method for coin pyraminx and gear cube
I finally got my gan 356m cube today! I’m so happy, it’s way better than any other cube I have
okay but why is solving unknown puzzles so attractive?
I have a gear cube that I can’t figure out how to solve. It is different from the one you showed. The official name is David’s gear cube. Some tips or hints might be nice. 🤨🤔
And by the way. Awesome videos! It’s cool seeing you play with all those amazing rubix puzzles. Keep up the good work. 👍
jperm lets hit 400k you can do it!!
J perm actually is slower than me yay
I achieved something
CuBeRtY.tm- speedcuber, Which cube?
Lol
A speedcuber can solve a Rubik's Cube in under 7 seconds.
@@Nogitsune1 lol my pb is 12.5 something, so that means im not a speedcuber?
@@Nogitsune1 ?
When ever I watch your video i want more rubix cubes.
This puzzles is awesome, since i love rubiks cubing i need to try this out
This dude is the best RUclipsr he doesn't have a boring intro at all just gets to it
I never know which puzzles to get when I'm at the shop. Often they end up being way easier than they look and then I feel like Im just throwing money down the drain.
your problem solving approach is amazing, almost researcher-like
I have hopes that Dylan can surely do even more of these. But this channel looks good with just the concise and informative tutorials.
Anyways I like these kind of unboxings and solves! Keep Going J Perm. Great content!😍😍
i'm glad youre trying this out, because personally i dont really enjoy speedcubing that much but solving weird puzzles at my own pace is very enjoyable for me
2:39
STRANGER THINGS fans be like
OMG 😂😂
Holly jolly 🤩
@@VinayGade SEASON 4 HYPE
The second 3x3 you shower actually turns like a maple leaf cube
"Ivy Cube is actually... pretty easy" bruh i wouldn't be able to solve that in 5 hours. -_-
Tbf it is easy, even for absolute beginner(me)
I can only solve the mini pyraminx
...the easy version.
Learn to solve a skewb. It is really fun!
He literally said in the video he knows how to solve skewb
I feel like better time spend watching 10 hours of cubing tutorial then any 10 hours of gameplay
4:21 anyone else see the sacred light blue peace? lmfao
What do you even mean?
Jperm hates square one
Cubing encoded hates megaminx
jperm: i cant solve a pyraminx
also jperm: solves a pyraminx
jperm brain: i cant solve a 1x2x3
also jperm brain: solves a 1x2x3
0:54 Jperm weird mode on
Just FYI, the Ivy Cube is just a pyra, which is why you can do the Sune-like alg like pyra that cycles 3 edges
The gear cube can be solved by solving the corners and then using 2 algs i wont spoil if u want to figure it out
the coin triangle thing seems the easiest since unless you follower rules like you can only spin it once per corner turn then its simple af
A general rule for solving any corner turning puzzles is to solve the corners first and use commutators for the edges. This works for many puzzles.
Thanks for the tip
Well I just solved every single cube in my collection for the first time today haha
You are doing the best unboxing videos for cube thank you for making the unboxing videos I am blessing to you to make a easy 3 by 3 Rubik's Cube tutorial
Video idea: solve a 6x6 like a 3x3, but the way u do it is that u do blocks of 2x2s, if u dont get it, not my problem sry :))
Ok at the end that's *SAVAGE* to say XD
That doesn't make any sense but Dylan has done it before on his V-Cube 6 Review.
@@s2erp5ent could u send me the link to the vid pls?
Ling Ling wannabes!
@@CH--LeNangucTri ayyyyyy, if u can play it slowly...
I dont know why but I enjoyed every single moment of this video
The ivy cube is really easy to solve l solved it by my own and u know after solving the cube again and again l watched some tutorial videos and it was like my own method. And l didn’t even know the name of the cube l just bought and try to solve it and it solved but surprisingly the tutorials were like my own method.
But honestly u made it really hard to solve the ivy cube.
"what? what?? i wasn't even trying to solve it" is also my experience with the gear cube
For some reason my phone doesnt do a sound to say that he uploaded but i saw the youtube icon so im here
I'm actually going for the record for longest time solving a 3x3 Rubik's cube. I started in 2010 and haven't touched it since.
For the 2x2x3, when you need to swap the two middle edges, just do R2 E2 R2
The Coin Pyraminx is like an Ivy Cube in a Pyraminx.
J Perm really needs to work on his non-WCA solving skills.
I INVENTED A 2x2 ALGORITHM!!! It is technically a V-Perm on a 3x3, except (U' D) move set. when we reach the U' D set of moves, I turned the cube left and continued the algorithm. This only works when, on the yellow side, two pieces that are diagonal to each other are solved, and the other two aren't solved. I held the cube near one solved piece and did the alg.
idk if this was already an alg for 2x2, but I just listed it to make sure. I used this while doing Ortega, and it helped.
13:14 it should be called the “gearaminx”
It's about 12:30 AM here in the Philippines
But I can't sleep without watching Jperm's new video.
J perm is best
This video is also good for us because if we want to buy the cubes you basically review them
I see three comments saying first
Why do you have to say you are first
Hurts nobody and if you have nothing to say it still supports the creator
@@mercylessplayer 👌
@@mercylessplayer so me too i'm gonna write first
And yeah please learn the skewb! It will look really great on you! Consider the only sledge method to start as a beginner.
I dont think he even has a skewb lol
To the 0.0001 percent that sees this, have the Best day. God bless.
0:56 illuminati pyraminx
☆☆loved it
Thx for the like whoever it was :D