That's how I did mine except the first bolt you pulled. Well done. Even pretty easy while on jack stands. Looking forward to a header install. Great work as always.
Still running the fomoco from 95 in mine waiting for it to go thanks for the upload showing how to take it out. I recently blew the original water pump belt and thought it was the water pump itself thankfully it was just the belt holy shit
Thanks, i'll have to make another video soon. Things got hectic towards the end of last winter, and i had to throw the car together really quick to make the first race of the season.
This is exactly the same procedure I use to do them on the Mazda 6 3.0. Never understood why people make a huge deal out of it. The 2.3 version you can maneuver the alt over the exhaust to the driver side and remove the battery tray to lift it up and out. All the duratecs have a similar manual of arms considering the cdw platform evolved into Mazda 6, jag x type, Volvo, etc. glad to see someone with common sense. I feel like people work it up in their head that it can’t be done and that prevents them From visualizing what needs to happen.
I love to see this video. Also love to see a video with the replacement of the rear transmission mount or anchor mount. I have a lot of mechanic running from my job. They want to pull my engine. I have a 99 ford contour sport SE Duratec V6 2.5L 24 valve DOHC Same engine as the SVT. Would be really helpful for me to do it on my own just like this video. I love my ride.
Jee thanks for replying back, I know your super busy, I get it, but after two years nothing, i didn't even remember written you and asking for your help, i could not find any video or info on what you, i believe, know better then anyone that has a video about this type of engine, but I had to do what you probably had to learn yourself by getting your hand dirty and figuring it out yourself, I know it sound like I'm mad, but I'm ok, I did figure out the whole problem was it was a bad steering pump I bought, took it back and had it replaced and installed it back on and everything was fine.
Yeah, i'm sorry about that. I dont always see all the comments as i scan through, or some i see and think i'll reply later and forget. Glad you got your issue fixed.
I am trying to figure out o2 sensor delete after getting headers for my 99 contour if you have a suggestion I would love to hear it can't seem to find anything online without spending 180 bucks
Hey Hoss, just have say, isn't it a b#$!@ working on the engine, my wife has a Mercury cougar 2000 2.5l v6 24 valve douche, yeah I said it, i nicked named it the nightmare cougar, I think I just have to change a tire cap and then I have rebuilt the whole dang cougar,,, Not only does my wife give me a hard time,so does her cougar, it easy to get a tool on the part being worked on but no room to brake it loose,,so I got a question for you on the power steering, I've replaced the steering pump, high pressure steering hose ,I purged it,and vacuumed bleed it but it still got stiff hard steering, like no power steering at all, there is what I think is a flow control valve,where the high pressure steering hose connect to the rack and pinion I think I installed that valve in wrong do you have any insight on how it's supposed to be put in between the hose in the rack and pinion
Really need to stop using that circuit breaker and use a legitimate fuse, those breakers go out and start randomly tripping or not tripping when they should
That's how I did mine except the first bolt you pulled. Well done. Even pretty easy while on jack stands. Looking forward to a header install. Great work as always.
Still running the fomoco from 95 in mine waiting for it to go thanks for the upload showing how to take it out. I recently blew the original water pump belt and thought it was the water pump itself thankfully it was just the belt holy shit
Wow you make this look easy your an outstanding mechanic. I'd like to see you put it back in please.
Thanks, i'll have to make another video soon. Things got hectic towards the end of last winter, and i had to throw the car together really quick to make the first race of the season.
Thank you. You the man
This is exactly the same procedure I use to do them on the Mazda 6 3.0. Never understood why people make a huge deal out of it. The 2.3 version you can maneuver the alt over the exhaust to the driver side and remove the battery tray to lift it up and out. All the duratecs have a similar manual of arms considering the cdw platform evolved into Mazda 6, jag x type, Volvo, etc. glad to see someone with common sense. I feel like people work it up in their head that it can’t be done and that prevents them
From visualizing what needs to happen.
I love to see this video. Also love to see a video with the replacement of the rear transmission mount or anchor mount. I have a lot of mechanic running from my job. They want to pull my engine. I have a 99 ford contour sport SE Duratec V6 2.5L 24 valve DOHC Same engine as the SVT. Would be really helpful for me to do it on my own just like this video. I love my ride.
Right on! I will need this in the near future!
To the guy Everett Roberts, who commented on this video ealier today, i'm sorry, but i accidentally deleted your comment. Thanks for the kind words!
Jee thanks for replying back, I know your super busy, I get it, but after two years nothing, i didn't even remember written you and asking for your help, i could not find any video or info on what you, i believe, know better then anyone that has a video about this type of engine, but I had to do what you probably had to learn yourself by getting your hand dirty and figuring it out yourself, I know it sound like I'm mad, but I'm ok, I did figure out the whole problem was it was a bad steering pump I bought, took it back and had it replaced and installed it back on and everything was fine.
Yeah, i'm sorry about that. I dont always see all the comments as i scan through, or some i see and think i'll reply later and forget. Glad you got your issue fixed.
I am trying to figure out o2 sensor delete after getting headers for my 99 contour if you have a suggestion I would love to hear it can't seem to find anything online without spending 180 bucks
Did you make another video of you putting it all back together?
no
Hey Hoss, just have say, isn't it a b#$!@ working on the engine, my wife has a Mercury cougar 2000 2.5l v6 24 valve douche, yeah I said it, i nicked named it the nightmare cougar, I think I just have to change a tire cap and then I have rebuilt the whole dang cougar,,, Not only does my wife give me a hard time,so does her cougar, it easy to get a tool on the part being worked on but no room to brake it loose,,so I got a question for you on the power steering, I've replaced the steering pump, high pressure steering hose ,I purged it,and vacuumed bleed it but it still got stiff hard steering, like no power steering at all, there is what I think is a flow control valve,where the high pressure steering hose connect to the rack and pinion I think I installed that valve in wrong do you have any insight on how it's supposed to be put in between the hose in the rack and pinion
Do you still have this car?
Yes, I do
1999 cougar v6 2.5l I tried my ads off to do this job cant do I'm still trying!
Sorry i didnt have another video about putting it back together. Once you find all the right angles to get to things, the job seriously is a breeze!
Really need to stop using that circuit breaker and use a legitimate fuse, those breakers go out and start randomly tripping or not tripping when they should
Dang that top bolt is a bitch this job pays 2 hours dont think its worth it but man good job very pro tech
With practice, i've gotten em out in about 15 minutes. Just have to attack it right.