I Convert My Air Cooler into AC (Air Conditioner)
HTML-код
- Опубликовано: 5 фев 2025
- Hello, friends! Welcome to Creative Life! Today i'll show you How to Convert any Air Cooler into Air Conditioner (AC)
Things Required & Buying Links
1) 12v DC Fan : amzn.to/2UcASdG
2) Peltier Thermoelectric : amzn.to/2U9A35l
3) Aluminum Heatsink : amzn.to/3c6p01B
4) Thermal Heat Sink Compound : amzn.to/2X68bPY
5) 12V 10Amp DC Power Supply : amzn.to/2Xbev9f
Attention ! Be careful and do not repeat this at home, the author assumes no responsibility for your actions, this video is entertainment, not education or a call to action!
GREAT WORK BUDDY.. I HAD THE SAME IDEA BUT MULTIPLE PELTIER...SORRY FOR THE OTHER COMMENTS.. TOo MUCH NEGATIVITY... THAT BECAUSE THEY THOUGH ACTUALLY this WILL CHANGE IT inTO AC .. BUT THIS WILL SAVE THE HASSLES OF LODING ICE AND THE COST... AND INCREASE THE COLLING IN THE ROOM ALMOST MORE THEN 11 Degrees.. GOOD JOB... AND FOR HEAT ISSUE JUST STICK A WASHING MACHINE DRAIN PIPE TO A FUNNEL, STICK THAT FUNNEL TO FAN AND REVERSE THE FAN...OR KEEP COOLER OUT SIDE THE WINDOW... JUST LET ME KNOW ..... IS IT REALLY NECESSARY TO ADD HEAT SINK IF IT IS OUT SIDE THE WINDOW.. MINE IS OUT SIDE... and THANKS AGAIN
I think, it is required because the temperature on the hotter side will increase a lot (if you don't add the sink). What sink does is increases the heat transfer area a lot and that helps it cool effectively with air.
@Shams Pukhtoon well said... Minimum It must have at least a pair peltier module for an efficient water cooling ...
It probably would melt down the plastic because of the heat.
Hi @@madhav2104
Do you know how much heat that a one peltier would produce, if we use it for a couple of hours/until it reach its maximum power..
Did you try with multiple peltier??
Nice effort. Don't understand why people are flaunting their degrees here.
The Cooler has been made capable of delivering cooler air which is good.
An AC reduces the temperature and maintains humidity. If one is using the cooler in less Humid areas, addition of cold water will give humid air which will be colder than when normal air cooler is used.
Heat sink will throw heat in same room but one does not use desert air cooler in closed rooms so it won't be a big issue. (If used in closed room, once the air in the room gets humid enough, the air will get saturated and no cooling will be provided). What matters is the temperature of air that is exiting the cooler. If one is able to make a small duct and throw the hot air outside the room it will will be better. Still you can not expect this to be an AC.
Simply a desert cooler made better with increased electricity consumption...👍
How much electricity consumption do you think this will add? Tnx nice comment btw
Nice, not the same cycle used in AC but the setup may work.
I think it can be balanced if the heatsink below is larger. the heat spread through the heatsink may not increase any temperature near it.
Cooler is supplying both cool and hot air to same room 😂
🤣🤣
very very well said,, and most important key point
I think this can be upgraded but peltier cooling is inefficient method to cool down the whole room an air conditioner is much better
you shoud put your room cooler out of room in window, simple
Point
Great job .Amazing workmanship .The cold side of peltier is dipped in water will it not get damaged. Plz explain .
People are suggesting to place the air cooler outside the window so that the heat produced by the heating part would not cancel the cold produced by the same peltier. Another practical way to do this without taking your aircooler unit outside, is to use a CPU water cooling radiator to cool the hot part of the peltier and place that radiator outside the room you intend to cool therefore the heat is vented outside. Your aircooler would be efficient and resembles now an split type AC though working in different principle. But the gist is the same, the cooling part is inside your room, the heat producing part is outside. Also you may place a portable ultrasonic mist maker inside your air cooler to enhance the principle of air cooling. This theoretically would significantly hasten the cooling of the room as mist will double the water evaporative output. Please mention this comment if you intend to follow my ideas to your future videos.
Looks like a great spot chiller, when you just need something to cool off with. Excellent video.
Good experiment, however you overlooked the basic concept of an AC. Every air conditioner is a heat exchanger. Meaning, it has to exchange heat from your room to outdoors. This is the reason why every Air conditioner has an indoor unit with evaporator coil and an outdoor unit which basically expels heat to outside air by virtue of the compressor. In your unit, the exchanged heat is still inside the room and it can't really cool down the room, you will only get chilled air on one side, while the hated part will expel heat onto that side, which is still inside the room.
This is the same reason why refrigerators cannot cool down a room if their door is left open. The heat exchanged heat will still be within the same room.
What you can try is, to heat up the water in the tray which is isolated from the cool part of the electrode, which is placed in the fan's path. Once the water absorbs some heat, throw it outside and replace with room temperatures water again. In that way, you're exchanging heat with outdoors while you drain out hot water outside. That much heat energy is gone out of your room, and you may experience overall temperature drop in the room after some time.
Please Hindi me btaiye
@@vijaynagar7951 क्या आप कृपया Google अनुवाद का उपयोग कर सकते हैं? मैं वास्तव में हिंदी नहीं बोलता। (मैं वास्तव में अंग्रेजी में यह टाइप किया है, और फिर हिंदी में अनुवाद.)
very good idea sir
Mujhe kuch samjha bhi fir bhi like kiya hai comment
Well said bro
With this technique, pCan we make the room heater too, if we just stick the hot side of the peltier to warm the water, and get hot air from the water cooler ?
The idea is very good and simple, but the pelter hot side fan will certainly make the room hotter as heat is not ventilated from the room and the heat produced by all the electrical devices.
Two options are available to ventilate the heat. Best would be to keep the whole unit outdoor and just let the air in. Like an window AC. In case you need to keep the unit indoor, create a 2"or 3" flexible duct, (used for vacuum cleaners) to ventilate the pelter fan air to a nearby or convenient location.
Very good Idea
Thanks for liking
some people are saying to put some ice ... but when ice melts its cooling caacity will again be same but peltier will countinue work... its great idea
Peltier generates more heat than cold.. the heat fan should be kept outside the room otherwise both heating side and cooling side remain in the same room. It's basically useless
@@BarujjeCo
yeah this point must be noted...
Free
what glue do u use to stick the heat sink to the peltier ? and also what glue you use to stick the heat sink to the box to make sure waterproof ?
Just place cooler outside of room in window. It will work great, I did this, thanks for the idea
Sir... Is that works properly
क्या लोहे की कूलर बॉडी पर भी इस्तेमाल किया जा सकता है??
Yes we used cooler out side the room for 12 yrs . 15 yrs ago its work great
@@mrjaspalsingh 🤣🤣🤣🤣lol
You mean After installation ?
best video of all similar subject videos
Its like showing how to push your back by yourself to move faster. Hahahaha.
Good Job 👍
Thanks 😁
A nice upgrade to that: use water cooling on the hot side so that the heat is trapped in the water instead on the air.
WOW VERY VERY GOOD IDIA THANKS🙏
देखना भाइयों लॉक डॉउन में एक्सपेरिमेंट खराब हो गया तो नया भी नही मिलेगा और सुधरेगा भी नही। जो है उसमें मज़े लो😜
मस्त बोला आपने l
@@FCADurgeshKumar धन्यवाद सर जी
😂😂😂😂😂😂😂😂😂
Sahi baat hai Bhai 😀😀😀😀😀
हा जी। 😂😂😂🤭🤭
I think adding of additional Peltier and one thermostat to control the water temp, sothat peltiers would be getting rest at given intervals and on off at depends on the set temperature.
No need of doing all this to your cooler because the water inside the cooler will automatically get cooled after using the cooler for sometime. The coolers are designed in such a way that both air and water can get cooled.
If you don't believe me then you can check yourself, just switch on the cooler and leave it for few minutes and then check the temperature of the water.
does not work when its too humid and hot climate. this method is a success and works almost as an AC and hazzle of putting ice is no more for me now
At the time making cooler we researched all the possibilitys .... this video dont have any effect on tempreture ... cause cooler fan itself make it
No its wrong bro . I had a desrt cooler but wwater temperature is not good that i need .
The heatsink fan hot air is supposed to be pushed outside. So, its better if u mount a pipe on it
He..🙄 This is really amazing...👏 Why don't you show the room temperature when the cooler is on?
I wonder if it'd work for a car. Like hot side exhausting through the window/car vent, cold side into the car.
Cause in summer where i live, even at night we're at 30°C+ and camping in the car is so hard..
This will work not like ac but yes good enough to cool a freaking room. The best way to make this work is to install this cooler in a window or make sure you keep the cooler outside of the room so only the cool air reaches inside the room and the hot air will be outside. Its an impressive idea.
Better explained..!
Coller will get air from side.. And the hot air will came to cooler again.. There is need an exhaust pipe which will get away the warm air from coller sides/surroundings.
You are shown complete tutorial.thank you keep it up 😊
Guruji jhakash
can you mention the size of heat sink you used?
Title should be how to waste perfectly working cooler. Btw nice video 👍
Inlet & exhaust can't remain in same room in AC , it just more chilling cooler...
Mene yahi socha tha koi ye video bana le apne bahut badhiya banaya yr 100 % work krta hai
Pani thanda honeke baad or Thandi Hawa Aati hai Cooler se
Bhai apko Patient milna chahiye.
I understand what you did, There was various concerns are with this, but its great idea...
Thanks
Heat sink means
@@mohan12340 If you clearly see assembling video, Applied cooling paste, and attached aluminum body which spread the heat creat by petals(The aluminum body work like heat srink)
@@mohan12340 it will absorbed the heat..
great job 👍
एव्हढा कुटाणा करण्यापेक्षा एकतर एसी लावावा नाहीतर कुलर वापरावा. सिम्फनी is best!
Bhai good video is ka cast kitna he
Lol. You cant make a cooler into ac. You can only make people fool. Hahah 😂😂
It doesn't take much to make you fool I see
Its not that its impossible.
@@tuts351 actually noo. I really get fooled by people sometimes. I think they are human but they are dumb as cows 😂
Good job
Where did you got all the stuff please share
Would be much easier to just make a little door to dump ice in once an hour or so. Peltier cooling is very limited, and the heat generated by the hot side of the heat-sink will exceed the overall cool air generated. Would need a duct to channel that hot air created by the heat sink to the outside.
Finally some sense, Indian youtubers have destroyed the Internet quality.
What if cooler fix to outside the room at window and little modification for exhaust so warm air will throw above the cooler by Using a 4inch pipe exhaust etc.
How did you place the fan to the heat sink? By gluing it with thermal glue of just an ordinary glue? Thanks
And he got an original one after getting so many views😂😂 Good work anyway👍
Nice.. How much money I need to send to purchase that electronic devices
The heat is being dumped in the same room. I cant see how this works.
@@jai9983 yes, that could probably work. But you need a larger or multiple peltiers. These small peltier design won't Help that much. Also add Big heatsinks.
@@jai9983 Yes if you place the hot side of the peltiers facing outdoors, while the cold part is exposed inside the room with proper fanning on both sides.
ruclips.net/video/OYzhH_hlChY/видео.html
I’m confused and I understand the heat exchanger concept.
However is this NOT an AC but rather a sort of supercharged Evap Cooler still, that simply cools the water more than a traditional cooler with the cooling plate?
Therefore the heat exchanger is not needed as the plate doesn’t generate Nearly the same amount of heat, right? Because the evaporation effect is still doing most of the cooling right? Or am I missing something?
Superb
Buddy good way of implementing ur idea and for the people who are filling in negatively two things for u guys first know how cooler works and what are the operation conditions second people if someone is doing something good try to encourage..... Final words for all gavars who don't read the description the creator has mentioned it as entertainment purpose so if u want to it serious then u need to find a good teacher and a school for enlightenment....
Water circulating in cooler gets cooled down after certain duration automatically, Fixing Exhaust fan at window temperature in the room can be decreased.
Super work
The running water inside the cooler itself gets cold after 15-20mins. It always happens with running water inside shade. Check it yourself.. Fill the cooler--- turn it on for 15-20mins and then check the water temp.
I don't think this is any useful.
What kind of adhesive do you use to stick the heatsink
Those fins on the cold side are hindering the cooling capacity of peltier because the effectiveness of fin is less with water....for better results replace it with a simple copper plate.
Nice job
Hot portion create more heat in room..just need improvement.
No, you have to usse you brain , we just put this outside of room and front side is attached with window
@@jayantasarkar even then it provide cooling of 60W. In other words opening your fridge in the room will have 50X more effect :) this is a BAD idea
Kya ye humid weather me bhi kam karega?
अच्छा है Iमगर गरम हवा रूमके बाहर निकालाना जरूरी है l पेल्टीअर हिटिंग साइड पर पाइप लगा कर व्हेंटिलेशन कर सकते है I
Can you still use it without water? Of course cooler (water pump) should be turn off. I mean the cool air coming from the coldsink is enough for the air cooler fan to make cool air.
Its looks great but heat kahan se niklay gi es trah to room me hot air or cold air dono ain gi...
what is that ?? cool & hot plate. Where can i get this ?????
अरे भाई ये तो बताओ ये चीजों के क्या नाम है और कहां से मिलेंगी ?
It's an invention / discovery we must appreciate it , as none of us have ever done this we must take it granted that it's working rather the electric bill sucks at the end of the month hence this may give some relaxation
Since when is stupidity an invention/discovery ?...Anyone with basic knowledge of peltiers knows that their efficiency is at best 2-3% of energy consumed
If he had taken the time to feed and exhaust air to and from the Hot cooler to the outside and back .. MAYBE he could have cooled the water 1c below ambient .. To cool all those liters of water he would need at least 6-700 watts of peltier but then why the f... not just buy an AC ?
Acha effort tha aapka if you work a little more with this design to aur badiya hoga fir yeh effectively kaam krega :)
I tried this idea, but instead of drilling holes I dipped the cool side heatsink into the water while using a fan to cool the hot side just above the surface
While the temperature only dropped to 27-28°C as seen on the built-in thermometer, at least it works 🙂👌
Not a successful idea, hot side will again add heat to room.
No, you have to usse you brain , we just put this outside of room and front side is attached with window
Not yet
Yes, we have to use a radiatior to eliminate the heat generated.
Put your cooler outside ...
yeap, i think he should change the heat fan to water cooler......
Superb Hats Up bro
Why not just put ice in water ?, more convenient and economical
Lohe ke cooler mein bhi fit ho sakta h ye system
BEFORE MAKING THIS BETTER YOU UNDERSTAND HOW EVAPOREATIVE COOLER WORKS. WHATEVER TEMPERATURE WATER YOU WILL ADD THIS WATER TEMPERATURE WILL GO CLOSE TO WBT.
Great work
It will heat up the room if you run this inside the room. Put the coolar outside and let the air come inside. While just little open some other window to let the air out.. these two are very basic point that 99% people do not know.
More over, it will never work like AC but yes can provide cool air if 3 to 4 such pelters will be fitted.. otherwise useless..
Yes , 4-5 TEC needs tobe used. We can fit near to window. So the hot air to go out with exauster.
But this is awesome one. I searched this for 3 years. But guy take it to real.
Can we apply this on Metal cooler as well else this will create current in cooler body?
Yamraaz okay.. Thanks
Creative life: I have been looking for this type of HeatSink, but where can I get it from?
It's the heat sink of a desktop processor.
So at a computer shop.
You can get it cheap from the computer scrap.
Any link to purchase circular saw cutting machine?
The whole process here is just an exercise to learn thermodynamics. The net cooling will be zero unless the heat generated by the peltier module is transferred outside the room. More ever for longer running of the system Peltier module is not worth and may get damaged very soon. The only way to cool the air in the room and avoid moisture in the air is to use heat exchanger only of copper. Then the net average room temprature may be maintained to 26 to 27 deg cent. This way it will be better than evaporative cooler but inferior to an ac.
Is that enough for big air fan
This will never work because there is no heat exchange outside that room. Secondly that small little peltier can't do anything!
ye chij kaa maam kua hy jo apne lagayi hay aur kha milega
Just added two heatsinks, those are capable of dissipate the heat on the metal surfaces. Where the dissipated heat will go?
That two heatsinks are good enough for big cooler Box? Design should be proportion to the device.
As per Ac working principal, room heat should go out and room will be cooled.
Did you know how much cooling and heating did thermoelectric peltier produce.....it stays in -15°C and the idea was not to cool the room it was only to cool the dumb fellow like you...who can even think better after chilling......
I like yor video
After adding the peltier device what was the wattage consumed by the air cooler ? Please upload that comparison video also .
it consume very less power, because its working on 12v DC
@@CreativeLifes with huge current ;)
@@CreativeLifes don't tell us voltage we want to know how much watt it will take
@@yourseeker3930 this alone around 150w
Very good sir
It is just like opening the fridge door and saying the room is getting cool !
Great job
Day 127 of quarantine: I converted my inverter into nuclear fission reactor
@@DM-vx8nf apne aukat me raho gawar insaan
@@DM-vx8nf saale dimag kharab hai kya tumhara. Pagla gye ho kya. Ye San jaake aapne baap ko bolna
Everything was fine and logic is fine.
But to remove to HUMIDITY which AC removes from room. Chilled Air is not going to remove Humidity in July, Aug, Sep and half October. This cooler is perfect in Aprip May June when there is heatwave but later on, ai doubt it bro....
But your work is commendable . Keep it Up
First thing, you have wasted your time and money bro. You can simply add some ice cubes to reduce water temp. You did not show the air temp from the cooler.
thank you for such a nice and creative idea
Most welcome 😊
At any time that components will fall down because of warer weight
Great Idea
Peltier is not that reliable and its stuck inside so no way to replace without damaging the cooler
what material used can put on listed
Bro the heat is being sent into the same room.a ac uses a outer unit to dump heat out
This method is suitable for iron room? Yes/Not plz tell me?
You only add heat transfer coil It’s not working if it’s works why people all buy a/c in and out door units don’t make fools dude
Just added two heatsinks, those are capable of dissipate the heat on the metal surfaces. Don't know why this gus making fools to viewers.
In between there is a peltear module installed you don't seen it
@@jrvsus12345 plz watch it again in between the heat sinks
Brother how to open this cooler can you make any video for this.
Do final temperature test of air flow from cooler n show to prove ur claim
Woww amazing video
The efficiency of a Peltier is less than 10%, so by using a Peltier, you'd be adding more heat (from the electrical energy converted into heat) in a closed room than the amount of heat removed from the water. Further, you don't have any heat evacuation setting to throw heat out from the room to the atmosphere outside. Thus, it'll raise humidity inside the room as the temperature of the room will rise on account of electrical heat coming from the Peltier heat sink. So, it's not a good idea to achieve cooling.
Fancy imagination though.
Usually cooler are placed on window...and heat will dissipate in atmosphere.....not to worry in case of cooler fitted to window
@@gurlone It won't be an issue if cooler is mounted on window & sink is outside room.
But in case it's kept inside the room the heat added will contribute to raising the wet bulb temperature making the room atmosphere uncomfortable.
Good video
Yep, fraudulent, 😠 - that’s not going to work; you’ve got to dump/move the heat elsewhere, preferably outside. With these evaporative coolers you’d be better off putting ice cubes in its sump/tank to further cool the water, and not to use it in a room that has other heat producing things in it (like the freezer you’d got the ice cubes from) 😉
U are right foolish plan wasting time
U can use it as like window AC..Modern problem require modern solution..
mr.Foolish! a room cooler is always placed outside the room, placing it in room window. Same like window AC.
Good idea, appreciated for your productive knowledge... only need to know. Where we can get this cooling plate?
epic fail, cool and heat the same room!
heat pump out , that is your home wok LMAO
What would be the power consumption ..?