You are truly the man that makes Lutron not scary and home automation achievable. Thank you for all the time it must take in making these well produced videos, what a mountain of work it must be......
Wow!!! Thank you very much for your comment! This is exactly my objective here. To break down each step so we can have all our basis covered and build from there. Yes this takes a crazy amount of time to produce those videos but when I receive all that positive feedback like yours it all worth it. Many Thanks again 👍🏾👍🏾👍🏾
Thank you very much for your kind comment. Glad it helps, that’s why I enjoy making those and comments like yours give me a reason to continue. All the best !
What hi power 0-10. 200watt drivers do you like. I have. 20sqaures of led tape in coffered ceiling it's about 150watts per tape run which I ran 4 conductor to split the footage to 2 pieces of dim to warm tape. Was going to use Ra2select dimmers but dont want to use a dimmer per cube. Any ideas would be appreciated.
Thanks for your comment. Each led lamp will be connected to its own drivers. Then, the lutron dimmer will be wired to all those drivers in series. For both the main and dimming signal. If you look closely on the driver connectors, pins will allow to wire to the next driver etc… Hope this helps 😉
I wish I can do a full series on RA3 but it’s not available in the UK where I’m based. If someone in the US is interested to send some kit and work on a deal for production, I’m here 🙋🏾♂️
Thanks for your kind words. As a standalone, you will have to operated this module with a Lutron Pico. no level status available on those as they are battery operated. To get some sort of feedback you will have to use it within a lutron platform that support both this RF module and a keypad that shows illumination level like homework for example. hope this helps. Thanks
Vous devriez parler dans votre langue le francais parce que l accent est trop forte! Les Th arretez de les prononcer avec des ZZZZ dites au lieu comme DE ca va faire plus anglais! C est horrible!
You are truly the man that makes Lutron not scary and home automation achievable. Thank you for all the time it must take in making these well produced videos, what a mountain of work it must be......
Wow!!! Thank you very much for your comment!
This is exactly my objective here. To break down each step so we can have all our basis covered and build from there.
Yes this takes a crazy amount of time to produce those videos but when I receive all that positive feedback like yours it all worth it.
Many Thanks again 👍🏾👍🏾👍🏾
Just wanted to say your videos are great. Im an electrician in America and find your videos super helpful
Thank you very much for your kind comment. Glad it helps, that’s why I enjoy making those and comments like yours give me a reason to continue. All the best !
Sir good video next video lutron next video iam waiting full programming
Thanks! Full Lutron RA2 Select programming here 👉🏾 Lutron RA2 Select Tutorial // Complete Basic Set up - Wireless Control Starter Kit - [NEW] (2019) ruclips.net/video/TRGYxfdKuPg/видео.html
Hi, would you just daisy chain the mains and 0-10v single to each light from the Lutron module?
Correct!
Awesome content
Thanks 🙏🏾
What hi power 0-10. 200watt drivers do you like. I have. 20sqaures of led tape in coffered ceiling it's about 150watts per tape run which I ran 4 conductor to split the footage to 2 pieces of dim to warm tape. Was going to use Ra2select dimmers but dont want to use a dimmer per cube. Any ideas would be appreciated.
Hello, the RF dimming module is for only one light or can be used to control a circuit with more than 2 lights?
It can do more than 2 lights
Can you make a video of wiring of module
I’m doing one as we speak. Should be out very soon. ✌🏾
Great video Xavier!
How would you wire multiple lights like this?
Thanks for your comment.
Each led lamp will be connected to its own drivers.
Then, the lutron dimmer will be wired to all those drivers in series. For both the main and dimming signal.
If you look closely on the driver connectors, pins will allow to wire to the next driver etc…
Hope this helps 😉
@@adelux so each light will require its own lutron rf dimming module?
No. It’s 1 dimmer per lighting circuit. See details in previous comment ☝🏾. Hope this helps. Thanks
Could this be used for LED landscape light inline with a ring transformer?
Not sure I fully understand your question. This will operate any 0-10v fitting. There’s also a Relay version that just does ON & OFF ref: LMK-16R-DV-B
Great video!!! Thank you Xavier, I have a question, going to the QSX Designer when having a 1-10V fixture, can the same module for 0-10V be used?
Thanks! Yes same module!
Great video. To get the light to work on your app, did you have to have their smart bridge as well or just the dimming module?
Thanks for your comment! Yes you need the Lutron RA2 Select in order to use the Lutron App. Hope this helps.
Do y’all have an English version?
what about programming on radio Ra3?
I wish I can do a full series on RA3 but it’s not available in the UK where I’m based. If someone in the US is interested to send some kit and work on a deal for production, I’m here 🙋🏾♂️
Can this device be used with a pico switch ?
Yes as shown on the video?
Great video! Is there a way to also pair this with a physical switch that shows the dim level status (via a set of LEDs on the switch)?
Thanks for your kind words. As a standalone, you will have to operated this module with a Lutron Pico. no level status available on those as they are battery operated. To get some sort of feedback you will have to use it within a lutron platform that support both this RF module and a keypad that shows illumination level like homework for example. hope this helps. Thanks
Can a wall mount lutron casita work with this? Or must one have R2.
Not too sure as we don’t have caseta in the uk.
Where’s the link to the course?
Ho that’s something we planned last year!
you should go over the diagram before the wiring
Thanks for your feedback
Vous devriez parler dans votre langue le francais parce que l accent est trop forte! Les Th arretez de les prononcer avec des ZZZZ dites au lieu comme DE ca va faire plus anglais! C est horrible!
Thanks for your feedback 🙏🏾