For the new WPL D12, the electronics are different from the ones in this video, and I don't have the new one yet, so I don't know where to connect the external ESC.
This is great. I have a pcb with a blown motor forward reverse chip. The steering is still working fine. Now I just need to get a new external esc to make it work again.
very nice! I'm definitely going to do this! I hope ill somehow still be able to hook up lights though (you ussually plug aftermarket lights into the plug you used for the esc)
I got austar ax7s. Problem is i cant upgrade esc because ax7s is an esc/receiver combo. I wonder if you have a way of converting it too. Just need to find the signal wires right? How hard can that be.
Video is grate, explenation also. But i think box is not tat practical. Holes should be facing front to the motor not sidways. Im having dificulties with wires. I did send message to make holes on front. Maybe he will remake it. But exept for that i love the box design and puting it all back togather. Thumbs up.
Halo om, saya pakai receiver baru, power supply di esc dah ada, jadi udah nyala, tapi kog escnya g mau konek sama receivernya ya? Jadi kedip2 aja lampunya. Rcnya cuman bisa belok.. kesalahannya di mana ya?
Can this be done on the MN stock receiver? How can we tap into the 2 inputs of the motor driver IC TA6586 or do we have to find the rx signal from the transmitter?
For the new WPL D12, the electronics are different from the ones in this video, and I don't have the new one yet, so I don't know where to connect the external ESC.
..... Well done Mate, don't know why you bothered with sub titles.
Your English is fluent and articulate. So envious of multilingual people.
This is great. I have a pcb with a blown motor forward reverse chip. The steering is still working fine. Now I just need to get a new external esc to make it work again.
very nice! I'm definitely going to do this! I hope ill somehow still be able to hook up lights though (you ussually plug aftermarket lights into the plug you used for the esc)
Very nice piece of information! 😮👍👍
Great video, all the information i needed!!
If you don't want to solder the PCB, just use separate battery for the ESC.
hello. is it possible to use 3s battery for esc and 2s for stock receiver same time? Obviously with different power switches an circuit.
Gadoga what if i have 2430 Brushless 6300 kv which esc is better 25A or 35A ??
Can I just use a plug splitter from the battery connector? Instead of soldering to the board
Hi this is a very good video. Will you be able to use similar method to connect a external esc to the MN82 receiver board? Thanks
Very very nice!
Hey man if I get replacement stock d12 receiver / esc. Will the stock transmitter work? How do I bind them together ?
I have three wpl D12, and I can use one transmitter for all of three (not simultaneously). It will bind automatically (in my case).
Very informative video ; thank you :-)
Hey if I get a stock replacement d12 receiver / esc board. Will my stock transmitter work ? How do I bind them ?
Nice video
Thanks for information
I got austar ax7s. Problem is i cant upgrade esc because ax7s is an esc/receiver combo. I wonder if you have a way of converting it too. Just need to find the signal wires right? How hard can that be.
What is the chip or IC used in D12 board.. i want to find out if its the same with MN99S
Hi did old board XX-318R support new remote with XX-339R?
Nice can you do a vid on how to do it on the 2021 pub?
Do you still have good low speed control when using ESC with stock receiver? Thanks
thanks for the vid man
How is the modulation with brushless esc and motor? Thanks
Sir hkw to install brushless motor to stock esc of wltoys a979
also make a video how to brushless motor+RES-v3 receiver and I'm a new subscriber here
Oh that was cool, i will sub for your work. I will do the same mods to mine if i can.
Tu peux faire une vidéo avc les soudures sur la carte 2020 je comprend pas
Video is grate, explenation also.
But i think box is not tat practical. Holes should be facing front to the motor not sidways. Im having dificulties with wires. I did send message to make holes on front. Maybe he will remake it.
But exept for that i love the box design and puting it all back togather.
Thumbs up.
Cool👍
Halo om, saya pakai receiver baru, power supply di esc dah ada, jadi udah nyala, tapi kog escnya g mau konek sama receivernya ya? Jadi kedip2 aja lampunya. Rcnya cuman bisa belok.. kesalahannya di mana ya?
Can this be done on the MN stock receiver? How can we tap into the 2 inputs of the motor driver IC TA6586 or do we have to find the rx signal from the transmitter?
@daijoubu4529 have you ever found about if the MN stock receiver can do the same thing? Thanks
@@aeroelastic6736 i made an Arduino that does the conversion, I can share my code, you'll have to solder 4 wires
is it the same process for brushed ESC and motor?
Hmm.😤 perasaan kemaren ada yang bahasa indo
display shows 2055 rpm yet the man says 20,055 rpm. small difference🤣
is it possible to use the xx-339r as an esc? like connect an external receiver to it?
what can you suggest servo for wpl d12 because iwant to upgrade my wpl d12 servo