there is an IC current because it is connected to a capacitor like a negative wire to a positive contact, it cannot work if there is a constant current
Inefficient and amateur like third world. Only two coils work in a star connection, just by chance. The motor will be destroyed as more current flows through the coils. Also needed is a frequency converter that was not shown in the video for "good" reasons. A three-phase motor can operate on one phase with one capacitor, but it is necessary to rewind the motor into a delta. The rated voltage is significantly reduced. Then that would be fine. Many things can work differently than they were designed, but only for a while.
@@petermarin I have given the instructions above. Search Google for values that suit your device. Only if you want to do what is on the video, you need to use a frequency converter that is intentionally hidden out of the camera's range.
this is amazing. i;m currently have 4 wire motor from HDD ... but i wonder 1: how to make it run it with DC power ?. also.. 2: does it need to be 3000+ uF capacitor or not ? tried with 300 uF and DC . xD not running.. Thanks
did it require any special tool to take the hdd apart? I have a real difficult time of getting them apart. That is a real problem but seems all these types of videos seem to do it too easily. can't understand that.
@mx22 pc components are usually dc, i doubt it would be converted to ac for any reason. The hdds usually have 12v and 1 lower voltage but thag depends on the hdd
But no pcb just wired components figureout this.. credit is ZAFER YILDIZ i guess its wye coniguratuon type bldc 4 wire with a sorted comp motor hardisk ruclips.net/video/bRWJC87NjNQ/видео.html
@@PhdHung Okay, I have two more questions: 1) What is the sequence of the wires to connect? 2) Is it possible to connect a potentiometer to control the speed? Thanks++
Interesting! So the capacitor provides a delay where the voltage lags the current. Nice video.
there is an IC current because it is connected to a capacitor like a negative wire to a positive contact, it cannot work if there is a constant current
Sir, any other optional capacitor??
Wonderful.i need to try first before commenting anything
well you sure focked that up now, didn't ya?
Yes he did
Yes I was hoping for voltage amounts as well. DC, right?
Inefficient and amateur like third world. Only two coils work in a star connection, just by chance. The motor will be destroyed as more current flows through the coils. Also needed is a frequency converter that was not shown in the video for "good" reasons. A three-phase motor can operate on one phase with one capacitor, but it is necessary to rewind the motor into a delta. The rated voltage is significantly reduced. Then that would be fine. Many things can work differently than they were designed, but only for a while.
can you show us how? genuinely interested in the one phase, one capacitor idea
@@petermarin I have given the instructions above. Search Google for values that suit your device. Only if you want to do what is on the video, you need to use a frequency converter that is intentionally hidden out of the camera's range.
Third world thanks
Why you used a 330uf capasitor. İf we use less capasity, the motor rotate faster?
Can I use 6.3 V 1000uf capacitor instead of this??? Please reply...
6:3 you got a like for this
Is this method can run the motor at it's full rpm?
no brother if you want to run this to its maximum speed then tell me in my video comment section i will tell you
this is amazing. i;m currently have 4 wire motor from HDD ... but i wonder
1: how to make it run it with DC power ?. also..
2: does it need to be 3000+ uF capacitor or not ?
tried with 300 uF and DC . xD not running..
Thanks
Thank you for the information.
Excellent video
thanks
Nice strong motor
since the motor rated at 7200RPM, does this method utilize the motor max speed?
Homemade102 é um dos melhores de eletrônica do RUclips
Thank you, have a nice day.
What's the reason of its rotation? Just a capacitor can't be.
It turns into a 2-phase motor. Like your fan.
@@PhdHung But how? Can you explain Please please please 🙏🙏🙏🙏🙏
@@zees9669 that is a ac fan the cap is just oscillating power between two coils taking the one wire as a common point like a y configuration
Thank you for video.
he he he chào em trai,lên sóng sơm vậy
ad là ng nc ngoài mà
@@kidnamedcancer ở nước ngoài phía bắc hả.....he he he
wtf :v
Cài giờ tự động đăng video đó anh ơi. chứ thgian đâu ngồi canh hả anh :D . lúc nào rảnh làm dăm 7 cái video rồi để nó tự động đăng thôi.
@@PhdHung vậy cũng hay em,còn khoản 30 ngàn nữa là em có cái nút bạc.....he he he
your idea is quite simple yet genius, do you think that we can control the speed if yes how?
Control knob between capacitor and live, not quite sure really....
The speed is according to the value of capasitor (capasity). So by using variable capasitor make us possible to adjust the speed in simplest way.
Or adding some mosfet like fz44 + potensio (variable resistor)
@@romeoj387нельзя использовать электролитические конденсаторы для переменного напряжения
I bet that polarized cap is having fun with the reverse voltage,,,,doh!
quick question. i have 6800uF 25v. can i use it?
yess. U can
Why does mine not working? The motor was not spinning but it was like it got magnet on something. Sorry i'm bad at english and explaining.
@@jctorres5851 подтолкни его рукой и обязательно используй переменное напряжение (AC)
what power u used ?
trafo ?
lipo battery ?
trafo 12VAC
*Super Cool* 👍👍👍
this vedio is so great but some instructions are missomg like connection of negative and positive and this is work from ac or dc ?
seems so often i hear in these types of things the word ESC. What does that mean in this context ?
Keep it up bro !
Thanks
Great video thank you
Does the process apply to all types of hard disks?
will a sensorless motor work with a sensored esc?
I hv a floppy drive motor and it has 3 pin. Not running by adding a capacitor HELP!
Maybe it's a step motor, it won't work
@@PhdHung No it's a BLDC 3 PIN MOTOR.
did it require any special tool to take the hdd apart? I have a real difficult time of getting them apart. That is a real problem but seems all these types of videos seem to do it too easily. can't understand that.
It would actually work better if you use a run capacitor from induction motor
Could it be a weaker condensate?
Hi, your circuit would only work on a three wire HDD motor right?
Yes
The four wires one has one more witch is a comon. Right?
@@felipe-eb2oz Yes. 4 wire one is star configuration with a common neutral point and 3 wire one is delta connected with no neutral point.
You powered whit AC??
Vc é monstro cara, o melhor dos melhores entre os melhores!!
Can you guess rpm that moter
Can i use any other brushless motor
I'm not sure.
I did this but motor was not running. Just vibrating and stuck. Was heating up
Because this video is fake.. you can't start it without ESC
Kaç volt ve 16 volt 3300 uq olu mu
Bro tell me ,the name of your table graphical table pad ,i just want to buy this ,but don't know the name
9Sea cutting mat
@@PhdHung thanks
What is that black things?
....and
I have a four wires motor so will this trick work on that???
.
Please reply .
this motor has 4 as well so try it . I dont know if this works or not , let me know pls
:3 tried with 2 capacitors but.. not working xD. had you got it running ?
@@HungNguyen-pz8wp eh somewhat, it spins but with very low torque and also rotation was jittery.
And it's been 1 yr so doesn't really remember.
Aww.. I was hoping that you remembered some part of it and give me hints to make that thing running
Work on brushless ?
1:55 thumbs up was creative.
How much voltage used to run the motar
5VAC
@@PhdHung this comment is extremely useful for me thank you homemade 102 and surendra
Another speechless video.
Mimes are often amusing, but they make piss poor instructors
Wiring?
안녕하세요?
ESC가 뭐예요?
브러시리스 모터는 꼭 ESC가 있어야 구동이 되나요?
ESC = electronic speed controller
Would a fan capacitor work, and would it run on a square wave pwm
Tụ bao nhiêu uf vậy bạn?
cỡ 1000 là ok b
How about it's torque
Is it an AC or DC supply you are using?
Thank you for sharing.
@@inspiringengineer should be dc. atleast that what computers give out to them.
@mx22 pc components are usually dc, i doubt it would be converted to ac for any reason. The hdds usually have 12v and 1 lower voltage but thag depends on the hdd
Since the power supply in a pc gives out low voltage dc
@mx22 thats true. Didnt think about that it didnt have the pcb
@blank_182 to what does ESC refer or mean ?
HEY DUDE WILL ANY BLDC MOTOR WORK AT MAXIMUM POWER BY USING SUCH WAY OF POWERING IT ??? THANK YA
Reptiloid Павелитель всеx Земель и Миров No.
Certainly not.
so this simply run, ive seen a person made esc with 3 mosfet in series no ic four wire hdd bldc
Where
I really need this
But no pcb just wired components figureout this.. credit is ZAFER YILDIZ i guess its wye coniguratuon type bldc 4 wire with a sorted comp motor hardisk
ruclips.net/video/bRWJC87NjNQ/видео.html
Is it ac or dc
نفس الفولت
مش زيادة صح ولا اية
زى موتور اللعبة ولا اية
are this real or fake?
of course it's true. use 12V AC
O tempo todo tentando encontrar um vídeo assim...
Será que funciona com um alternador de carro, transformado em motor ????
I want to see motor from 14k rpm hdd :D
What is power source.
AC bro
Funciona com qualquer motor de disco rígido?
Hello! Great Video! What You Think? Will it work with 2300 uF Capacitor? Thank you!
But it don't runs as fast as it should
Em lắp y chang nó k quay a ạ
I powered it with amplifier and played 20hz and its much better.
:D
Loại motor của e nó có 4 chân thì đấu vậy dc ko a?
cắt chân chung đi thôi là ok
Cái đó giới hạn vòng quay hay không anh
Cắt dây chung ??? Vậy là coi như biến động cơ 3 pha thành 1 pha , công suất chỉ = 60 phần trăm ban đầu ???
@@PhdHung! làm sao biết được chân nào là chân chung?
But doesn't the Motor run at full speed? Not!!
yes :D
@@PhdHung Okay, I have two more questions:
1) What is the sequence of the wires to connect?
2) Is it possible to connect a potentiometer to control the speed? Thanks++
Ele funciona no máximo em RPM?
Он работает всего на 10% от максимальных оборотов
What about a motor with 4 poles?
I'm not sure.
How much minimum voltage does this needs ro run?
You did not show the power supply.
Can you put super cabacetor
Are you using ac or DC
AC 12V
Just spin but heating so much.
Capacitor value photo
Cách sử dụng ngày còn sử dụng trong động cơ 220V
if you 4 side how to chek
A hard drive motor with esc has the torque to use it as a small cnc spindle?
thanks
ولله بطل شكرا لك
How to control speed sir
Скорость контролируется частотой
Good
thanks
you hiden something in 4th socket
are u mad, what are u trying to do with the motor
Thank you for watching.
Will it work at full capacity?
Of course not.
Whey the hell don't you "Tubers" tell us what your doing? SPEEEAAAKKK!
Pin4?
12v ac or 12v dc ?
12V AC
Please mark the three pin.... which one is positive and negative.... thanks
👍👍👍💖💖
Attiny13 desulfator convert PIC Series IC please please please
not working
Ligação simples e muito bom funcionamento
@@PhdHung HEY DUDE WILL ANY BLDC MOTOR WORK AT MAXIMUM POWER BY USING SUCH WAY OF POWERING IT ??? THANK YA
Plz make esc at arduino .up amper up voltage
Not ok
Eu tenho um de 7200RPM
im try, but is fail
Pembodohan, saya mencoba sama persis tp hasilnya didak berfungsi
VOCE QUEBROU O QUARTO PINO DO MOTOR, USOU SÓ TRES PINOS, FAÇA O VIDEO DIREITO, DEIXA DE ENCANAÇÃO.
Slow less rpm