New Home for My Dewalt Planer
HTML-код
- Опубликовано: 12 апр 2023
- In December 2022 I purchased a new Dwelt planer for my shop. I have been using it on the floor and needed to make a mobile cabinet. I wanted the cabinet to be mobile, have storage space, and be cost effective. All of these I accomplished.
This was the first time I used store bought drawer runners.
♦Other Shop organize videos:
Bench upgrade drawers: • Work Bench Upgrades (C...
New bench top: • New Workbench Top For ...
♦Tools/Material I used in this video
Best Tape measure Ever: amzn.to/3NwdY98
Tight Bond II: amzn.to/3akXQsY
Good Circular Saw: amzn.to/3tYKRE1
Awesome Shims: amzn.to/3NcHEHK
Cordless Drill: amzn.to/3uV9v9d
Kreg pocket hole jig: amzn.to/3K3ouWH
Impact driver I use: amzn.to/3xOQxBD
1-1/4" Pocket Hole Screws: amzn.to/41g8Wo4
♦ Tools I recommend and use in my shop
Freud Dado Stack: amzn.to/3YFmngB
Strap Clamp: amzn.to/3OyXIVc
Sander: amzn.to/3bdWBMf
Pipe clamps: amzn.to/3jTUIt1
Tight bond III: amzn.to/3HkgRbk
Good hand saw: amzn.to/3bvymJS
Spray lacquer: amzn.to/3z5dNvS
Reciprocating saw: amzn.to/3PO34xB
Propane torch: amzn.to/3Xv5vZw
Angle Finder: amzn.to/3yFfTST
Tight Bond Quick and Thick: amzn.to/3bX1gma
Magnetic Wrist Screw Holder: amzn.to/3u07cAV
The Jig Saw I Want When Mine Breaks: amzn.to/3HSbShW
Drill press: amzn.to/3xJMjLy
Drill press Fence: amzn.to/3ygwSf7
The Jig Saw I Want When Mine Breaks: amzn.to/3HSbShW
Craft paint I use on projects: amzn.to/3zf2eTv
Wood burner similar to mine: amzn.to/3svzmCS
I receive a small commission if you use any of these links for your purchase. It helps and Thank you!
♦ Channels I like to watch
See My Home page for Featured Channels
♦My Links
My Facebook: / epeiuscustomwoodworking
My Instagram: / epeius_garage
My TikTok: EpeiusGarage
My Email: Epeiuscustoms@gmail.com Хобби
Greta job as always! Looks sturdy. Well built. Stay safe man
Thanks Zach! Appreciate you jumping on the premier!
Nice video. I always appreciate the honesty of a home shop, that is not filled with tens of thousands of dollars worth of equipment, that most of us will never have, and still be able to turn out a great project. Well done!!
Thank you very much! I like your profile picture! I’m a horror buff!
I love how relatable you are. I can’t tell you how many times I’ve stopped to try to figure out if I’ve screwed up or not lol. Great design. I don’t have a planer but may make something like this for benchtop bandsaw I bought today.
Thank you Dave! Yeah, you should make one. Post it on your page!
I felt like I was watching myself when I built my first shop cabinet, trying to figure out if I had the pocket holes wrong (which I did at times), the challenge of doing drawer slides for the first time, etc. I know there was a lot more work than what you put in the video! My shop floor isn't very flat so I might have a perfect height outfeed table in one spot but an entirely different story a few feet away.
Haha, I hope that’s a good thing🤣. Yeah there was a lot more to the drawers. I learned a lot but it wasn’t to bad. I probably should of watched a video or two first lol. Thanks for watching Jim!
Awesome work, Andy! 😃
I have a small shop as well, so I bought a 2 in 1... Now I also need a cabinet like yours, but on its side. 😬
Anyway, stay safe there with your family! 🖖😊
That’s awesome! Have fun making it!
🪚🪚🪚🪚🪚