There can be only ONE... Business Card! | Laser Cutter Experiments
HTML-код
- Опубликовано: 5 сен 2024
- The prop no one asked for! Bill fixed his laser cutter and is feeling nostalgic for his favorite TV show from the 1990s, Highlander. That combination resulted in experiments with laser cutting stamps from a variety of materials to make the Duncan Macleod Antiques business card.
Links:
What the Font
www.myfonts.co...
Inkscape
inkscape.org/
How to Draw Patterns, Templates, & Blueprints With Free Software - Premium Video Tutorial
www.punishedpr...
Extra Credit Club - Thank you for the support!
punishedprops....
Tools & Materials:
Foamsmith Utility Knife - Punished Props Shop
www.punishedpr...
Stamp Ink Pad - Amazon
amzn.to/2NYUikF
Ink Roller - Amazon
amzn.to/3dN8cB9
Business Card Stock - Local Hobby Store
Full Spectrum Hobby Laser
fslaser.com/Pr...
Balsa Wood 1/4" thick - Local Hobby Store
MDF Board 1/4" thick - Amazon
amzn.to/3uCiwCc
Varnish Gloss Finish - Amazon
amzn.to/2FRCrIU
Punished Props Mission: Transforming passionate fans into confident, skillful makers. Find out more at www.punishedpr...
Fun ways to help our channel:
Join our Extra Credit Club! punishedprops....
Buy our books! www.punishedpr...
Share your projects with us on twitter!
/ chinbeard
Music from artlist.io/
Drive by Last Coast
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Thanks for watching! Check out our website for all our builds, free templates, and sweet products! www.punishedprops.com/2021/03/01/laser-cut-stamp/
I totally hate the 5th Gen FS Hobby laser. I support one of those at work and it's the most maintenance intensive machine and does really annoying things like cutting it's own air assist hose.
We also have a FS 24x36 pro at work and it's great, although.. it didn't come with a built-in water flow sensor (instead relying on an external water alarm signal from a chiller) so I had to hack one in myself. Overall i'm happy with the mechanical build of the 24x36 pro. Retina engrave is awful though because you can't put cuts & engraves on at the sametime.
At home I have a Shenhui SH-G350. (AKA 50W laser Ruida on ebay) I really like that machine! The linear motion system is built up like the FS Pro. All cables/air hoses are kept safe with a drag chain. I've hacked in a solid state relay to control the air assist pump automatically, which is a nice QOL upgrade for me. Also the machine is a lot less expensive (and in my opinion much better) than Full Spectrum's offerings. The software that comes with it RD Work lets you put engraves and cuts in the workspace at the same time, which i really like. On the downside the english translation of a lot of the options in RD Works is pretty difficult to decypher at times. A company called Lightburn has released basically a rebuild from scratch of RD Works that's much nicer to use and also allows you to do some of the camera-based tricks that you'd usually find on a Glowforge laser.
“Look at that subtle off white coloring. The tasteful thickness of it. Oh my God. It even has a watermark.”
Hah!
As a graphic designer that often uses What the Font, I’m tickled to see you using it! 😆 I love replicating fonts on props
It's so much fun!
Thanks for the information as I'm an old graphic designer...i.e before computers. I draw my fonts out by hand but have updated my pc and I will use it from now on.
@@neilperry2224 Recognizing typefaces was something that became a really obscure superpower early in my short career as a graphic designer. I learned from older guy who actually used to set metal (lead) type. Though, I felt better, later in life, when I forgot a lot of that stuff and was able to stop being such a stickler for type and layout (life is too short to be a "font nazi" unless you just have to be one).
I'm no font nazi or snob I'm actually enjoying using the modern fonts from the ole school graffiti artists. And ty again. Stay safe
I was watching Adam Savage Hellboy Samaritan build and was screaming about that website when he looked for the text on the case
What the Font also has a mobile app that I have used a number of times now. It does the same thing as the website, but it also allows you to use your camera to identify a font. It's been super handy to me for replicating IDs, manuals, and prop inscriptions/etchings.
That’s so handy!
Bill: "I'm not quite sure where it's from."
Gigantic Watermark: "Am I a joke to you?"
Look at that subtle off-white colouring, that tasteful thickness of it...
Oh my god, it even has a watermark.
Ha! Nice. =)
just a couple of weeks ago i was trying the exact same thing. we actually end up engraving the letters and pouring silicone over it and using the silicone as the stamp. came out pretty good.
Oh that's a fantastic idea!
Quite an interesting replication of the card. Laser cutters are so magical.
So magical! =D
I was screaming from the top of my lungs "you need to mirror the image!!!" when you were saying "ready to send to the laser cutter"
HA! I'm sure you weren't alone. =)
I had the same thought. Almost shouting, "it needs to be reversed!"
Look at that subtle off-white coloring. The tasteful thickness of it. Oh my god! It even has a watermark.
HA! Nice.
As someone who makes fonts and uses What The Font AND is a Highlander fan, I enjoyed this video very much!
Also, glad someone pointed out the spelling error and you guys acknowledged it in the comments :)
It's hard to deny the power of a good font :)
can't wait for the punished props spin off show: Will It Stamp?
HAH!
Dangit! I was just trying to learn the backpalm over the weekend, and here's yet another person making it look so smooth with a business card!
Ah man, Highlander, though. Those were good times!
The best times! I practiced card magic a lot when I was a bartender back in ~2005.
Bill take a tip from lithography put the paper on top of the MDF stamp and use the roller to press the paper onto the stamp.
Thanks for the tip!
Ohhhh I remember that show. I must watch now.
You must :)
Love the shirt, Bill!
Thank you!
Hi Bill,
Thanks for the"Fonts" tip and Inkscape trick.
I would love to see more of your Inkscape magic, I know there are a lot of them on YT but man that font trick.
Maybe a tip back, try to stamp with a fine silicone mat under the paper instead of the cutting mat if you use MDF or other hard materials as a stamp, you will get a lot more detail.
Thanks for the tip!
You might like our Premium Inkscape Tutorial - I go into a LOT of detail about the program and how to use it: www.punishedprops.com/shop/inkscape-video-tutorial/
What!? Highlander has a TV series!? Sorry Bill, your video can wait. I'm going to check out the TV series real quick.
Oh yeah you're in for a treat!
Neat project! It's cool to see the different trials and the progression to the final design.
Thanks! It was nice to experiment a bunch.
Laser cutters are so cool. Just can't afford one any time soon lol
Someday!
I've had success making stamps out of Delrin on my laser, the material engraves nicely and is pretty sturdy! I recommend looking into it if you need to stamp something in the future. Great vid!
Oh cool thanks!
The Balsa Wood stamp gave it an old timey print type of look, kind of like the stuff @jimmydiresta prints on his printing presses. Freekin lasers for the win!!
Oh yeah totally!
Glad to see others enjoyed the series I loved it but so many people I know don't rate it! Such a great continuation of the films, loved the prop you made would love to see you do it on a rubber stamp in the future!
Thanks for watching!
putting some heavy felt behind the paper, or even a foam mat, might make the print block work better. Thanks for the video!
Thanks for the tip!
Awesome! I actually applied to be a fight coordinator for the TV series...
Whaaaaaaat that's so cool!
I watched the whole series multiple times. Might need to think of a prop I was to make now ;)
heck yeah!
@@punishedprops I feel it’s going to be watchers field notes notebook leather cover
Highlander is one of my all time favorite TV shows, along with Stargate SG-1/Atlantis/Universe. Would love to see y'all make some props from the Highlander movies and show, maybe even from Stargate.
Oh yes! I watched a *lot* of SG-1.
YES!!!! I want/need laser cutter now! :D
They're a really neat tool!
you dont mess with FONT people, they are ruthless.
It's pretty amazing how important it is in design!
That stamped card looks wonderful! Good work :)
Thank you!
very cool Bill and Britt! I hate when I discover it was a small dollar or simple fix that has kept me inactive. Darn that overthinking!
Right?! I was worried I would have to replace a $400 laser tube.
@@punishedprops BTW - Just name dropped you on the latest "Tested" video
So simple and yet so good! LOVE IT!
Thanks!
Freaking cool man!
Heck yeah!
This came out while I was reading foamsmith 3!
So exciting!
Ooh I love how these turned out! I also love that there was a fax number on it, who says immortals are old fashioned? :)
Fax machines are immortal!
I really want to add a laser cutter to my arsenal. It's on my list of next big tool purchases. I really enjoyed using them when I used to be a member of a Makerspace, but I can't justify drive 2 hrs to use a laser cutter.
It's a great tool and was one of my first major purchases. SO worth saving up for
Amazing as always.
Off with his head. lol
Thanks!
The whole time I’m like “a STAMP?... it’s backwards!” 😅 luckily you figured that out right after a test on balsa. I did learn that you can kind of stamp with it though 🤔😵 that’s neat
HA! Yeah I think I make that mistake every time I make a stamp like this.
@@punishedprops im always paranoid when I have to flip stuff 😂 the card turned out perfect though ✨
Love the Evan and Katelyn shirt! Love your video! But your “there can only be one” needs more conviction. 😉 #SupportOurMakers
Suitable too! Make Fail Make
I don't know if I can say it with as much conviction as Connor MacLeod does at the end of the first Highlander movie, but I'll try. =)
Cool. Thought you would have just used dense foam in the laser. Works really well in mine 😁😁
I don't think the foam I have on hand is dense enough, but that is a great idea.
@@punishedprops it only dawned on me as a thing to do after engraving foam props in the laser lol. I dropped some cf100 in and made a logo stamp for myself
Great to see you guys again!Which foam did you use for that attempt,Bill?I wondered whether SKS' HD foam might have produced a decent result,as it's super-dense...?🤔
We may have used HD foam, but it was probably TNT cosplay supply or Yaya Han - you're right though, a more dense foam might work great!
Love it
Thanks!
That "Aquisitions" spelling error in the original prop is giving me a headache.
Holy crap I didn't notice it until just now.
I came here to say it should be “Acquisitions”, without realizing that the misspelling might be from the original prop.
Was not disappointed. 🤣
It's the same in American Psycho.
I noticed the sticker on the laser cutter "For rectal use only" :D
I prefer not to ask what rectal use you made with it, thanks! :D
But seriously, thank you for the video ; ) Looks like the balsa wood has too much density difference between the different type of fibers. Interesting to see how it reacted to the laser cutter. It embossed the hard fibers. By laser cutting a whole plank of balsa, you could end up with only the hard fibers embossed and get a big "wood imitation" stamp the size of the plank :D
Yeah it's amazing how the wood grain makes so much of a difference to the laser!
I've also found DAFont to be helpful, it's been around for 15 to 20 years.
Great site
Can your laser engraver cut into softer metals like copper or aluminum? If it does then you'll have much better results using a soft sheet metal and backing the metal with wood so it stays flat. Then apply the ink to the metal with the rubber roller and press the paper on a thin piece of rubber or foam. You'll be able to get much finer detail on your prints.
Thanks for the tips! My laser cutter can't do metal, but for others this is very helpful!
Love wor videos bro
Thanks!
Was there a reason you didn't use plastic or a hard rubber (which I feel has proven itself as a reliable stamp material :D )?
We didn’t have any in the shop.
How about a Have Gun-Will Travel business card next?
Try a stamp lasered in acrylic then roll the ink on the stamp with a rubber roller.✌
OOh I like that idea!
Glue a block of mdf to the back of the acrylic stamp to stop it flexing (cracking I half!) while printing. ✌
I remember when you made that storage rack for the laser and installed the power strip upside down. That still triggers my OCD :)
Oh man, as soon as I can move that closer to a different outlet and flip the box over, the better.
With a stamp you should make EMBOSSED business cards.
Ooh that would be fun to try too!
When my friends and I used to watch Highlander back in college, we used to say, "There can be only WONG." It almost became my twitter handle, but it was too many letters... ;)
HA! That would be perfect. =)
I am in for all sorts of paper crafts and props.
Yes!
or you could just use rubber-stamp designed for laser cutter... about 10 bucks for an A4 sheet. works very well. the MDF stamp are not useless : they can be used for embossing leather, and that's great, provided you engrave deep enough (might need 2 passes or even 3 depending on your laser power)
You almost made me yell at my computer (which would have been embarrassing at work) about not mirroring the image to make a stamp.
We got there eventually!
you may turn it around with the stencil on the table and the paper on top. Then roll with the rubber roll over the paper. That's how old relief printing machines work.
Oh snap! I don't know why I didn't think of that. Awesome idea. Thanks! =)
@@punishedprops oh and another thing I've forgotten to mention. Try to apply the paint with a rubber roller. This leads to
a more even colour distribution. The prints get more uniform
I honestly completely forgot a Highlander series ever existed lol
The mid 90s were a crazy time!
Nice card. I had liked that kid Richie. I had a feeling from the start he was going to end up Immortal but not go ape crazy.
Yeah Richie had an interesting character arc, for sure!
Photoshop has font matching built in nowadays. Just select the part you want to identify and select Match Font in the Type menu.
Oh amazing, I had no idea!
I would have to think that instead of making a stamp, that making it as a stencil and then applying the ink would give you a cleaner result. But this looked great nontheless!
That could work too!
Nice!!......now let’s see Paul Allens card
Oh boy
Such a fun project! Did your laser come with that adjustable height print head or was that a mod you did? (if so, do you have a vid of that mod?) I'd love to add something like that to my K40!
The Z height adjustment is standard on my laser cutter.
I wonder if a good thick coat of paint before you laser cut would have been helpful?
Hmmm, maybe.
I wonder how linoleum block would work? It's not as old a material for print-making, but artists have been using it for generations.
I bet it would work great! Not sure how it would work with the laser cutter
@@punishedprops Trying linoleum and different materials might make an interesting video. A suggestion that I made on Simone Giertz' channel was to see if the laser can cut through B.S. The world could use that.
Maybe if you had done a clear coat on the new balsa wood stamp it would perform better.
Good thinking!
do you think you could do something with fabric like maybe a crypto costume? i think it could be a fun challenge for someone with your skill level especially if you make the drone with the charging dock. just a suggestion since i really love your work and information you provide with all your helpful tips.
Thanks for letting us know you're interested in that build! We have our current schedule worked out, but there could be room for this kind of video in future plans.
Given your proclaimed love for big chunky revolvers you might want to try your hand at making the service weapon from control.
Oh man that game looks awesome.
@@punishedprops it is especially if you like the SCP universe.
I have a fsl muse and I like your on/off switch setup do you or could do a video on the setup of the switch bank
Check this out! ruclips.net/video/Qm-CKsWfOic/видео.html
@@punishedprops thank that helped a lot. It must be a Pacific Northwest thing building with what you have lying around the shop. I do it all the time
5:41 Balsawood isn't really heat friendly. Even with enough friction, it can leave burn marks.
10:51 Okay, that's a better quality.
11:27 We have a winner!
Weeeee!
If you ever find yourself doing something like this again may I suggest a material called Linocut it's used for printmaking
Thanks!
@@punishedprops
No worries
What about Linoleum block? This method has been around for decades.
I didn't have any so I wanted to try wood!
I have a feeling that if you put the paper on the stamp then used the roller on the paper it may turn out better
Good thought!
I need a lazer printer. There are a few things I need to make and print.. lol
They are super handy!
@@punishedprops yes they are.
hey we have been finding people and youtubers to interview. would you be interested?
I'm surprised that a movie crew spelled Acquisition incorrectly.
If you pump CO2 through a laser cutter, you don't get flare ups.
Oh yeah I guess that makes sense about the CO2!
Rookie mistake! I've made the same, also moving the piece when it has not been cut through then having to finish off by hand Grrrrr. TFS, G :)
Yeah, happens to the best of us!
I’m named after Duncan MacLeod 😂
Well that's just fantastic
Now you can make a rubber stamp seal.
Totally!
What did you think of Highlander: The Raven
It wasn't very good, but it was better than the 2nd and 3rd Highlander movie. =)
@@punishedprops and they were better then the 4th, 5th, and 6th film
There can only be one..hundred..thousand
I want them all!
Uh.. there is a typo on the business card.
aCquisitions...
Show of hands, who was shouting "flip it!"?
😬
Please do a eva foam fallout 76 excavator helmet for cosplay!!
Love your videos!
Thanks for the suggestion!
@@punishedprops np!. Looking forward to it!
Movie sword is Connors Sword then series sword is Duncans sword. Seen every eppy of series and all the movies.
That's awesome!
Why not just Laser Print this, as in to use a Laser (toner) Printer, since the output is on paper?
That's also a great option! You can use a program like Adobe Illustrator to create a stamp effect. I like to try out different methods to achieve an effect!
Are business cards still relevant
You'd be surprised!
Most people migrated to Magic: The Gathering or Pokemon, but business cards have held their value - especially the holo-foils.
Great prop! But the phone number!!!
Thanks Becky! =)
Awesome job and a nice call back to a great show, just don’t watch any of the movies, especially The Source.
We're going to for fun but yeah, they are super bad XD
Can I come work at you shop for like a month pls 🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿
Sorry but we aren't hiring at the moment
Need a linoleum block...
I think a lot of linoleum is made from vinyl, which shouldn't be cut in a laser.
Paul Allen's?
I actually saw the Clan MacLeod sword at Comic Con at the Prop Store booth a few years ago. Since then it was purchased by the Paul Allen family and put on display in the MoPop museum here in Seattle. I visit the sword often. It's displayed with Connor MacLeod's Scottish outfit next to Ramirez's outfit and sword.
@@punishedprops That's a heck of a coincidence - different Paul Allen with a pretty great business card. Even has a watermark.
noot noot
This is not up to your regular caliber build quality... It was a cool concept though...
It's fun to experiment with stuff outside my comfort zone!
What about if you laser cut the wood (or maybe acrylic) without reversing or making a negative of it... and make that the bottom of mold box then do a thin silicone pour... Then you'd have a silicone stamp... Know what I mean Bill? That might make it easier to get all that tiny detail text without burning all around it and losing details....
or you could just use rubber-stamp designed for laser cutter... about 10 bucks for an A4 sheet. works very well. the MDF stamp are not useless : they can be used for embossing leather, and that's great, provided you engrave deep enough (might need 2 passes or even 3 depending on your laser power)
Thanks for the tip!