Retroford Tech Guide Ep.4: Zetec RWD Parts Explained

A brief video showing some of the parts needed to get a Zetec in your MK1/MK2 Escort.
Like us over on Facebook: / retrofordltd
And on Instagram: / retrofordlt. .
Check out our website: www.retroford.co.uk/

[@mingwangchung]

This was the most helpful video on any escort engine swap ive ever seen. Bravo!

[@anotherdayinparadise7443]

We are half way through putting focus st170 into MK1 fiesta and my son has just invested in a mk2 escort (more door),
Great info from all your videos 👍🏻👍🏻

[@jamesoconnor3017]

Beautiful work lads ! 👍

[@ryan16260]

Great kit but i struggled to wire up the alternator as couldn't understand their wire diagram even as an electrician lol could do with a nice video that would help alot. thanks 😁

[@bongoutofwater]

great videos!
will you be doing the same with the 2.0 duratec

[@Retrofordltd]

Yes we will be doing a duratec video alongside all the separate individual product videos

[@niallflynn1094]

I am considering a st 170 swop in to my sierra p100, will you be doing a sierra swop video at some point?

[@Jonathan_Doe_]

Do your flywheels work with the transit mk3 MT75 clutch setup?

[@coryanderson8269]

How are the bellhousing bolts in the two piece sump handled? Are they just not used?

[@Fordmk1]

Hi Thankyou for these great videos they are very useful,wanted to ask can I use these kits to fit a 2.0 lt blacktop in a mk1 granada...thankyou

[@Retrofordltd]

Yes all of the components mentioned in the video apart from the engine mounts could be used to fit a Zetec engine in a MK1 Granada. We have a set of DIY Zetec engine mounts that you could use for your application, please see a link to these on our website:
www.retroford.co.uk/product/zetec-diy-engine-mounts-z006/

[@Fordmk1]

@@Retrofordltd thankyou for your reply will contact you guys soon

[@tevinw.6031]

Hello, do you sell the complete engine assembled with all the accessories attached?

[@jasonupton6588]

Great idea can I ask if you can fit a cosworth 4x4 sump to it.

[@Retrofordltd]

Hi Jason, no not that we are aware of but someone may have modified one to fit a Zetec. Not something we have come across though. 👍

[@cheater1995]

Hi, Can this be considered almost the same on a ford Sierra Sapphire swap? Thanks!

[@MarianoACV]

Could this kit work for a ford capri MK3?

[@hondamotorspeed304]

hi, can i use flywheel and clutch from a 1.8L silvertop on a 2L blacktop with a type9 box? Thanks:)

[@Retrofordltd]

If the 1.8L Silver Top is already set up and being used in a RWD application with no issues then yes the same Clutch and Flywheel would be suitable to use on 2.0L Black Top engine in the same set up 👍

[@glennp9904]

How much is a new engine? I'm in Australia but UK price idea is fine.

[@Tanarivoimaa]

Why don't you have exhaust kits and other zetec accessories for the mk1 taunus/mk3 Cortina

[@dazzx10r]

will you be doing something similar to this on the 2.0 Duratec?

[@Retrofordltd]

Yes we will be doing a duratec video alongside all the separate individual product videos

[@nealthomas5943]

Also what’s the difference in Bhp between 1.8 & 2.0 ta

[@Retrofordltd]

It would be approximately 20BHP on standard engines 👍

[@v.taveirajleitetaveiraleit5067]

Como consigo esses acessórios..

[@nealthomas5943]

Is that an 1.8 or 2.0 cheers

[@Retrofordltd]

Hi Neal the engine in this video is a 2.0L Black top

[@irish-thinker4429]

Would a zetec in a p100 be a waste of time ???