Couple videos later you’ll find part2, ruclips.net/video/r3zvSpOB-sg/видео.html. I’m no mechanic or expert just a parts replacer. Good luck with your unit!! 😂
I’m not sure about the bkts, how try to size they run. I have 29.5 Assassinators and the scrub when I hit a hole. I think you would be fine but not 100% sure.
Nice man. looks sick. I'm sorry to bother you but last question? I'm having trouble finding the drive shaft for our ATV 570xmr. where can i purchase the entire drive shaft like the one you have in the video or anyway you have a link Please?
Why did you buy SAE sockets? Proper fit on the axle nut is 27 mm. EDIT: holy crap! Have you ever used a wrench or dealt with threads before in your life? Seeing you hammer on the threaded end of that trailing arm bolt made me cringe.
Thanks for your input.however I bought what I could find at the time. I’m not a professional, I only work on my units. You have a point about the threads, what would you use to get the trailing arm bolt out?
@@JZDIGITAL well, just don't take the nut all the way off at first. Unscrew the nut so that it sticks out just to even a half millimeter further than the bolt and hammer on the nut itself. Then either follow up with a punch on the center of the shaft or pull on the head of the bolt. You can grab the bolt head with vise grips and twist it back and forth as you're pulling on it to get it out. And grease the unthreaded part before you put it back in.
You made me go back and watch my video. I did know to leave the nut partially on the bolt but you are correct I should have mentioned it in the video. Thanks for watching the whole video, and for your input.
@@selfmademigo10k33 don’t know if I’m working yet. I’ll keep ya posted, probably gonna be fixing up the can am. You know the regular. Ride once fix twice. Can am life. Lol😂
Where’s p2 ? Video very useful 👍👍
Couple videos later you’ll find part2, ruclips.net/video/r3zvSpOB-sg/видео.html. I’m no mechanic or expert just a parts replacer. Good luck with your unit!! 😂
👌
Yo man do you think some bkt 30s would fit a 2020 outlander 570 xmr ? Or what bkt size do you recommend have stocl floorboards
I’m not sure about the bkts, how try to size they run. I have 29.5 Assassinators and the scrub when I hit a hole. I think you would be fine but not 100% sure.
you dont i have 30in bkts on a 2018 outlander xmr 570 and I just had to trim a tiny bit
hey what up brother what sz rim and tire assassinators do you have on the bike?
29.5 x 10 x 14rim
@@JZDIGITAL nice! Thank you! On the front and back?
Yes
Nice man. looks sick. I'm sorry to bother you but last question? I'm having trouble finding the drive shaft for our ATV 570xmr. where can i purchase the entire drive shaft like the one you have in the video or anyway you have a link Please?
I purchased mine off mudnwheels.com out of Canada. Where are you located ? Some atv shops around you may have them in stock!!
Why did you buy SAE sockets?
Proper fit on the axle nut is 27 mm.
EDIT: holy crap! Have you ever used a wrench or dealt with threads before in your life? Seeing you hammer on the threaded end of that trailing arm bolt made me cringe.
Thanks for your input.however I bought what I could find at the time. I’m not a professional, I only work on my units. You have a point about the threads, what would you use to get the trailing arm bolt out?
@@JZDIGITAL well, just don't take the nut all the way off at first.
Unscrew the nut so that it sticks out just to even a half millimeter further than the bolt and hammer on the nut itself. Then either follow up with a punch on the center of the shaft or pull on the head of the bolt. You can grab the bolt head with vise grips and twist it back and forth as you're pulling on it to get it out.
And grease the unthreaded part before you put it back in.
I never planned on working on any of my units till I costed it out at the dealership. Thanks I hope I don’t have to do that again.
You made me go back and watch my video. I did know to leave the nut partially on the bolt but you are correct I should have mentioned it in the video. Thanks for watching the whole video, and for your input.
Can am can’t hang 😂😂😂🥶
What you ride?
@@JZDIGITAL U know dat Honda 🥶dat Monsta😂👏🏽
The fact he did all that work removing trailing arms when he didn’t have to is cringe.
First time ever doing something like this so.. you got to make mistakes to learn.
Lol u need ah Honda
I ride with a Honda dude in my next video. I lo stick with the Can am.
@@JZDIGITAL 😂😂let’s ride this weekend
@@selfmademigo10k33 don’t know if I’m working yet. I’ll keep ya posted, probably gonna be fixing up the can am. You know the regular. Ride once fix twice. Can am life. Lol😂
@@JZDIGITAL 😂😂😂ight