- Видео 238
- Просмотров 260 107
JZDIGITAL
США
Добавлен 29 окт 2012
This channel was intended for all things digital but slowly evolved to a off atv channel. I will be uploading videos every weekend, If we can get a ride in. I am new to the 4x4 experience but hopefully we can learn together. I purchased my atv in October of 2019 and have recently done some upgrades. I will be sharing all my off road fun with you guys and hope we can all learn together to have fun and ride safe.
New pond, tons of CRAPPIE, I left them BITING!!!
Went to check out new pond to see if I can find some good sized crappie. I was able to bring some home and cook em up . thanks for watching,.
#crappiefishing #fishing #jzdigital #catfish #bait #minnows #pondfishing
#bass #speckled #viralvideo
#crappiefishing #fishing #jzdigital #catfish #bait #minnows #pondfishing
#bass #speckled #viralvideo
Просмотров: 138
Видео
Deeper creek, we take to the deep holes at deep creek.
Просмотров 5219 часов назад
Last ride after I fix the connection on my battery at deep creek. Torres kept up pretty good on the 570 xmr. We had to show them Hondas how to make it thru the deep spots.
They almost flipped the outlander at FALL BASH 2024
Просмотров 4319 часов назад
Full sending with a new crowd who's not afraid to get down and dirty. Can am 450 had to show them how deep we can go. About sunk the Renegade 1000 Xmr #canamoffroad #mud #sendit #canamxmr #450xmr #renegade #buscobeach #braydonprice
Did we kill the 450 XMR at Deep Creek Atv park !! TOW OF SHAME!
Просмотров 1662 месяца назад
Hitting almost every hole on the path at atv park. I should have taken it easy, had to get towed back to camp. #canam #honda #jzdigital #mudding #offroad #
Going deep on the 450 XMR at DEEP CREEK atv park.
Просмотров 1783 месяца назад
Torres show us the ropes at Deep Creek, trying to find the deepest holes. We found one that was too deep for the 450. Hondas had to sit these holes out. #honda #canam #mud #offroad #
Full sending the 570 XMR against the 450 XMR.
Просмотров 2603 месяца назад
Oscar showing the 450 how to get the work done. My Go pro ended up dying but I had the 2 person view, not much talking but I hope you still enjoy this was shot in February 17, 2024.
There were some Monster Bass in this pond.
Просмотров 1983 месяца назад
Justin and I go after the big bass, 11 pounders were caught in this very pond. I caught my personal best and he did pretty good himself. don't forget to like comment and subscribe.
How to catch the Biggest BASS in the pond using TEMU lures.
Просмотров 884 месяца назад
My personal best at skeeter hollow. Using cheap baits to catch petty of bass.
How to catch a lot of white perch off a Sea Doo Fish Pro jet ski.
Просмотров 1887 месяцев назад
I put out white perch fish baskets or traps or pots, off of the Sea Doo Fish Pro Trophy, and man did I get a ton of fish. Some would say it's not fishing, but I got fish to eat and that's all that matters. yes it's legal and it's called trapping. #fishing #whiteperch #seadoo #fishpro #trophy #trophylife #trapping
SNORKEL goes under Water...HONDA VS CAN AM. Backyard mud trails.. #canam #honda #atv #mudding
Просмотров 4029 месяцев назад
We full send right in our back yards. Honda boys invite me to hit some local holes and see if my can am has what it takes. We full send and even break a few things.
How to catch Huge crappie in the winter!!
Просмотров 1599 месяцев назад
We are back at a pond where there are a ton of huge Crappie. I even caught the biggest bass ever. The biggest Crappie was 14 inches so far..
Biggest crappie I have ever caught . #crappie #fishing #bass #pb #speckled
Просмотров 859 месяцев назад
First time fishing for crappie by my self. Caught a total of 14 crappie and a 2 lb bass. Was a fund day hope you enjoy the footage , Don't forget to subscribe..
Full sending the Can Am 450 XMR with new friends and fans at Busco Beach!
Просмотров 1559 месяцев назад
Full sending the Can Am 450 XMR with new friends and fans at Busco Beach!
I got us both STUCK in the thickest mud in the World, or at Busco Beach.
Просмотров 47910 месяцев назад
I got us both STUCK in the thickest mud in the World, or at Busco Beach.
Drag Racing a Can Am 850 vs 570 XMR against the all new 2024 Outlander 700 XMR. Fair Race?
Просмотров 2,6 тыс.10 месяцев назад
Drag Racing a Can Am 850 vs 570 XMR against the all new 2024 Outlander 700 XMR. Fair Race?
Guy FALLS OFF giant Polaris 1000 at Busco Beach's FALL BALL!!
Просмотров 275Год назад
Guy FALLS OFF giant Polaris 1000 at Busco Beach's FALL BALL!!
Everyone gets super STUCK at Fall Bash 2023 at Busco Beach!
Просмотров 286Год назад
Everyone gets super STUCK at Fall Bash 2023 at Busco Beach!
First official ride at FALL BASH on the Can am 450 XMR, had to test out the builds.
Просмотров 405Год назад
First official ride at FALL BASH on the Can am 450 XMR, had to test out the builds.
FIRST RIDE at Fall Bash 2023 at Busco Beach! Almost sank the Can Am.
Просмотров 786Год назад
FIRST RIDE at Fall Bash 2023 at Busco Beach! Almost sank the Can Am.
Racks Deep. Full sending the new unit. Oscar on the 570 XMR Outlander. Almost sunk the 450 XMR!
Просмотров 485Год назад
Racks Deep. Full sending the new unit. Oscar on the 570 XMR Outlander. Almost sunk the 450 XMR!
Caught in a MASSIIVE rainstorm on the Sea Doo Fish Pro and found a Cabin in the Woods!
Просмотров 76Год назад
Caught in a MASSIIVE rainstorm on the Sea Doo Fish Pro and found a Cabin in the Woods!
Installing the MOST QUIET HMF exhaust on 450 XMR. FINALLY
Просмотров 199Год назад
Installing the MOST QUIET HMF exhaust on 450 XMR. FINALLY
Went fishing on my NEW Three-Wheeler and caught a ten pounder? Part 1
Просмотров 64Год назад
Went fishing on my NEW Three-Wheeler and caught a ten pounder? Part 1
Pit bike XMRs. XTREME MUD RIDING!! Mud bash bonus footage!!
Просмотров 50Год назад
Pit bike XMRs. XTREME MUD RIDING!! Mud bash bonus footage!!
Racing pit bikes at Busco Beach!! I get GAPPED bad!
Просмотров 148Год назад
Racing pit bikes at Busco Beach!! I get GAPPED bad!
Straight piping my Can am 450 at Busco Beach
Просмотров 1,1 тыс.Год назад
Straight piping my Can am 450 at Busco Beach
Sunk the Can Am 450 XMR at Mud Bash 2023 (part 2)
Просмотров 475Год назад
Sunk the Can Am 450 XMR at Mud Bash 2023 (part 2)
Can you catch trout???
I have caught some in the past but not lately, you?
@JZDIGITAL yeah, I always catch trout when I fish in Leechville
@sallymae-x4z not me well at least not all the time
@@JZDIGITAL I usually catch my limit by 9:00
Dam, me too when I go with my friend Justin.
A 70+cc vs a under 50cc saw?
Which one is mine? I’m the one that lost. He’s the professional. I’m the weekend warrior
Ok. I guess it isn't as fun as it seems. Thanks for the insight.
Not as easy as it seems. If you know what you are doing it is an amazing machine. Could be loads of fun.
Hey Man, Keep the dream alive - I am just as ill informed as you are but willing to learn. To bad your not in Florida. Even so, good luck. Keep you head up - at least your doing it.
I haven’t been out on it in 4 months, bout to sell it. I got a small boat and carry someone to teach me sum.
Literally didn’t even know they make a 450 xmr version
They don’t, I took the parts off a 570 XMR. Shocks radiator relocate
Glad to see the videos coming back bro!
thanks man, means a lot that people actually care and watch them.
The only dumpster Polaris makes is the highlighter
Cause I’m not a big fan of the racks on 450 and I want to mud version i’ve already put hand guard and 28s on it
And how u fitting 30s on it ,floor boards
So that is a 570 xmr bumper and relocation kit
Yes it is a 570xmr relocate and shocks lifted it a couple inches, stock floor boards.
Soak you radiator with simple green then scrub gently with hot water and soft bristle brush then flush to clean the coils. If your motor was jammed even if you freed it the shaft seal failed and you got water in it and it seized. If it seized once it’s not long for this world, replace it. Or just go ahead and risk it but you never know where you’ll be when it seizes next. Leaving you high and dry and needing a pull toy pull to get you back to the trailer.
It would help if your fan cuts on also.
Amen
These videos are very helpful, but I have a 2022 850 XTP. There are no videos for it. The service manual says the whole front module has to be removed, all of the plastic, and even the bumper and winch. I ended up taking it to the dealer and telling them to put in a new radiator!! Now, I will put it up for sale and buy something easier to service. NO MORE CAN AMS OF ANY MODEL!! Even an oil and filter change requires too much disassembly!
What’s a service manual? 😆 Yeah I’m not sure about the XTP MODEL. I also had an Xmr and I serviced it myself as well. Not sure why you would have to do all that for the radiator most of these frames are then same. My friend has a Polaris and he says they are way easier to service. Good luck with your next bike. Thanks for the comment.
😮😮😮😮 I've never dipped, submerged my 2022 Can am 450 OutLander, and I probably never will....😮😮😮😮 it's to hard to clean afterwards...😊
I don’t blame you, I wish I never did. It’s hard on the machine. Once you do, it’s addictive .
😮😮😮 im having a sputtering issue on my 2022 450 OutLander also. It only starts doing once I've been riding for about 20-30 minutes. It's still under warranty, but I don't wanna turn it into a shop until I do my problem solving. Thanks, and I will subscribe Texas out 😊
Check the plugs or wires make sure they did not get wet. Pull the plug and clean it if dirty. Water in gas?
Thanks 😊
@9:03 thats the wind going through your fishing line...
Freaked me out the first couple times till I figured out that’s what it was.
Take it to the car wash and hit it with the pressure washer
Got a pressure washer and would be better to spray pressured soap on it as well. I installed a rad relocate already.
I’d like to know if the 570 was tuned or clutched .. and also if anything done to the 700
570 was tuned and clutched but the 700 was bone stock
What part of NC are you in? I'm around the Goldsboro area and we hit New Bern and Swansboro when we go out.
I’m in Williamston about 45min-1 hr from Newbern, I’d love to go out with others soon before I decide to post it for sale…
@JZDIGITAL I know exactly where that is... we use to go to indoor ATV TT races years ago in the ag building there. I have a 17ft center console that we normally go out in. I'm thinking about getting a SeaDoo Pro Fish.
@mike333h they got there pros and cons I’m thinking about maybe getting a boat and getting rid of the ski.
14 seconds is all I could take of the background "music"
Sorry you feel that way. Most music I tried in the past was copy righted. I downloaded it from RUclips studio.
that’s a bass
Yes I know, was being funny
@@JZDIGITAL oh okay
NEVER wear Waders when on a water craft.
Why not bud?
@@JZDIGITALhe’s right! Out alone those would be a bitch to swim in if you went overboard and were hurt. Get yourself those floatation overalls or the whole floatation monkey suit for the colder days.
@JZDIGITAL because they will fill with water and you will sink if you get thrown off and injured. No chance of treading water in those.
@christophermillett2273 I actually fell overboard once and I’m lucky they didn’t fill up. It was cold and I needed to stay dry.
@JZDIGITAL that's good they didn't fill up. Enjoy your ski and keep slaying em. We haven't been able to go out for 3 weeks now with all the rain and storms down here in florida.
This at busco?
In the parking lot of busco beach.
you should try some of the foam products to clean the radiator better. I hope you got it a lot cleaner than in the video
Jack hole boi
Wya? I'll show you how a real quad does it. Not one of these heavy slow 4x4 quads, the DS 650 with a little kick of nos will hydroplane that.
We are in Williamston nc, always looking for full sendersx to ride with us: this hole is nastier than it looks I’d like to see someone cross it from side to side.
2 cold for all that 😂
It was kinda chilly..
What is the size and thread of bolt you put in to remove the belt?
8 x 1.25 I believe type in can am belt removal tool.
U gotta get that mic fixed. Haft the fun of watching your videos is listening to your crazy comments 😂
Working on it
That 700 xmr surprise me that beat the 570 xmr with aftermarket exhaust.
The weight and size of the tires play a big role in speed too. Same Tires’s 570 would have won. But year it’s very impressive.
@@JZDIGITAL i think because I saw a lot of videos of 570 beating a 650 twin cylinder and when I see the 700 single cylinder beating it I get surprised
@isaipedeoza7274 I beat some 570s when I had stick ties but can’t hang with. Honda 250 with these big tire
Busco! You're in my neck of the woods
Yessir we wide there often. Bout once a month.
It took me about 3 years to catch you out there, but that was a fun ride...Looking forward for the next one...Eddie
Edddddddiiieeeee . Sorry my mic was messed up but it was fun riding with ya. We maybe going this Saturday if you can make it out there. I shouted you out in the video but mic was messed up.!
I thought you said you didn't know how to fish...lol....That was a nice bag...
I can’t catch anything outside this pond. I fished here 2 other times and only caught a 3 one time and zero the next time. Went into a river where they were catching them and also got skunked
All you ordered was the 860 big bore kit from mr rpm? Was there anything else? I’m trying to put a big bore on mine so trying to get some info
Not sure what else, a bunch of stuff. Contact suicide cycles out of Virginia
The guy with the poulan doesn’t know how to cut. Who trained him to cut. Absolutely terrible
Nobody trained him, diy, not a professional. That’s why he hired a pro.
I need bring up my quad from FL so I can hit busco again
Yes it is an awesome park. Although we hit the same trails it’s always different. We can always find a way to get stuck.
thought you were going to take me with you Tio
I will, this was a spur of the moment trip, I’ll call you when we plan our next ride. Stay in touch.
That’s just wrong leaving the kids behind as u party on 😂
@@weekendwarriors334 nephew but you right .
Had more fun in the kids bike than my man bike
You must be taking about your 570 vs your 850 scrambler, 😂
@@JZDIGITALyeah i am
@@oskartello9132 or were you talking about my power wheels?
Soo glad u back bud !!!! This is Jerry from Alabama. I started this channel but still working on getting equipment lol
lol had u give u another 👍 and a view ☝️
Appreciate it bro I think you been here the longest. 😂
That 570 ain’t stock
Why not?
I was on the 850
@@That_23outty that thing was nasty. Got it set up right.
@@JZDIGITAL i appreciate it my buddy is the one that set my clutches up and got it right
@RobbyPippen juliozapata05 I hardly post there but I guess I can start.
Do you have a video of how it ran before you did that would be the way to go not just say I did a spark plug wire
I think there was a ride before this where it would lose power went boot got wet I’ll try to find it .
When you started it was it in gear ?
Not sure but if your rear brakes work it should start in gear
Hey buddy what size tires will the 450 with a 2” bracket lift clear?
I have 30 inch cryptids with no lift, just xmr shocks. With a 2 inch bracket lift you should clear 31 of 32. I’d recommend Aztecs if you are mudding they seem to be light and pull in mud. I might get them. If not mudding then motohavocs or bkts.
@@JZDIGITAL dang clear 30s with no lift. I’m on the way to go pick up a 450 right now and was wanting to do a xmr build like yours. When I saw your video is was like it was meant to happen lol. Will the xmr stuff off of any outlander 570/650 fit on the 450? Like rad relocate, snorkels, etc
@@Dickson219 before I installed the shocks off an xmr they would scrub a bit when I hit bumps. After not at all. I always recommend more power when you can but I like how light the 450 is compared to other bikes. Plus cheaper to maintain. If you put bigger tires I would recommend a cvtech clutch makes a huge difference. No clutch kit tho.
@@JZDIGITALwhat’s wrong with the clutch kit i got one on mine and running 30s want to go to 32 in azzs
@450outtygang with the dalton clutch kit I didnt notice any difference plus when I put the cvtech clutch it caused it to jerk. Put original spring back and it worked perfect. I’m looking for some 30 Aztecs myself
Awesome video thanks for rescuing us out the snorkel pond
Any time! The least I could do. We all might get stuck one day. Never no when ima need to get pulled out myself.
That’s a 450 motor sitting on a 2022 570XMR chassis they don’t make a 450XMR
Naw original quad is a 2019 outlander 450. I put on a bunch of xmr parts off a parted out 570xmr. You are correct they don’t make a 450xmr from factory. But I did. 😂
@@JZDIGITALlol
Well I’m loving the videos bud. I’m gonna have to schedule a visit up there so we can ride 👍
Please do! You should. We try to ride often but we ride too hard and break stuff often.
That’s me on that yellow 850🤙🏽
Y’all hit that like button 👍
Thanks man. You da best
What happened to the rest of video bud ? I still loved and enjoyed it Keep them coming 🤙
My go pro keeps dying I don’t know if it’s my batteries or my memory card
Where the 1000s at I’ll come send it with y’all
We had a few that ride with us but they scared.