Add a extra 2 quarts of oil maby 3 and it will quit ticking. Your oil pickup tube oring is bad. This brings oil level up to the o ring and problem solved watch and see
@@BOOZECRUISERCUSTOMZ overfilling the oil causes windage problems at the bottom of the crank and it also severely robs horsepower... never overfill the motor or trans imo... to get rid of the lifter tick put some atf or seafoam in the oil and drive it around a while before changing oil. The detergents will clean the gunk out of your pushrods and top end. Ls motors have a through pushrod oiling to the top end and if a hole gets clogged it will starve the top end of oil and tick. Also a shitty oil filter doesn't help i.e. Delco, fram, etc... I only use wix or k&n and they have an anti drain back valve and better quality. God bless.
What did do for pulling from a dig? I've got the same powertrain in my '12 crew cab and its a great motor, but an absolute dog off the line, mainly due to the 3.23.
I had a garbage LS4 5.3 in a Impala SS. 3 engines with the tappy tap tap. Replaced under warranty 3 times in 50k miles in a year. Full service records too .they bought it back and that was that. I bought a Nissan Titan after that. It went 400k happily..with 395 hp..stock
@@jewbabydono the 4.8 is exactly like the 5.3 just less hp. And has better torque on top end. You can tune the 4.8 with out even many mods. Check out LS swap guru he does alot of tuning for this 4.8 trucks.
Not if you do it yourself. I just rebuilt my entire top end. Everything brand new with a BTR cam and new timing set. New intake, injectors, plugs and wires as well. I got about 2500 in the whole thing.
Awesome video! Im in the same place and I will be doing it without any problem. I want to do the same set up. Question, could you give me the parts list for it? Please
I’m from Lafayette. Wondering if that’s where y’all are at? 337 and your accent kinda seem it. But not sure. Anyhow is it a vortec max or a 4.8 or and I just ignorant?? Please help me out my head is scratching
I need some help , my 2002 Silverado has a very bad fuel problem . I put about 19 gallons of fuel and I get about 150 miles when I’m suppose to get around 280 . It turns off and it has a hard time turning on. Where are you guys located ?
bro its crazy, didnt realize we live in the same city until you drove under the bridge. reppin the 337
Heck ya. Same direction I’ll probably head with my lil 4.8 in the 05 cat eye
Lifter tick comes from a worn out o-ring in the oil pickup tube. $3 fix
Not a easy or cheap one labor wise.
No it doesn’t 😂
Thats awesome man you are doing great stuff. love the channel.
This is exactly what happened to me and this is the same idea i had. Do you regret the cams? As far as MPG and noise?
Nope, I’m happy. Get 16MPG
@@337speed2013 4.8 crew cab 4x4 flow master super 10 levelled 2’ on 33’s im sitting at 10.7mpg goddam smiles per gallon I guess
came from your tik tok, would really love that camshaft for my truck
Nice truck brother
Man i wish I could do this to my truck. I have a red 2006 Sierra. I am also from the 337 😀
Came from TikTok I would love the cam shaft for my 07 5.3 Silverado
Gimme that can shaft baby
Came from tiktok, I have a whole build for my Ls2 and just missing a cam, would really love it if I won it!!❤️
U have a whole build? Huh
Finally u uploaded a new vid bro
4.8 Vortec Max? I think not so much
Turbros new vid!!! Lol I know that’s not the channel anymore but it’s how I remember it
Dope ass video bro I needs to do this to my 2000 suburban..
Ready to slap some boost on👀
When you boost on a NA car, do you gap the rings?
Depends on how much boost you run, you can get away with 6-8lbs of boost but more than that I’d gap the rings.
Change the rear end gears it run a lot better
Here from tiktok came to watch your videos. Follow n subscribed 💯
You a real one man!
@@337speed I’m tryna get that cam for my 6.0 truck ☺️😂
Yo I’m the dude that spammed your Facebook with likes about 5 mins ago
How much did this process cost without labour?
Btw love the gmc! I have a 14 crew cab
a lifter tick is nothing unless you have the 07 and up dod or afm other then that a lifter tick wont hurt the motor
i got a 05 tahoe that has had a lifter tick since 90k and she got 251k on her now
Add a extra 2 quarts of oil maby 3 and it will quit ticking. Your oil pickup tube oring is bad. This brings oil level up to the o ring and problem solved watch and see
@@BOOZECRUISERCUSTOMZ overfilling the oil causes windage problems at the bottom of the crank and it also severely robs horsepower... never overfill the motor or trans imo... to get rid of the lifter tick put some atf or seafoam in the oil and drive it around a while before changing oil. The detergents will clean the gunk out of your pushrods and top end. Ls motors have a through pushrod oiling to the top end and if a hole gets clogged it will starve the top end of oil and tick. Also a shitty oil filter doesn't help i.e. Delco, fram, etc... I only use wix or k&n and they have an anti drain back valve and better quality. God bless.
@@MarkM-dk9te it will slowly eat the cam
What did do for pulling from a dig? I've got the same powertrain in my '12 crew cab and its a great motor, but an absolute dog off the line, mainly due to the 3.23.
Got the same truck and was thinking about doing the same thing but I have a classic and a 6in lift on 33s MT
6in lift with 33s?? 😂
I had a garbage LS4 5.3 in a Impala SS. 3 engines with the tappy tap tap. Replaced under warranty 3 times in 50k miles in a year. Full service records too .they bought it back and that was that. I bought a Nissan Titan after that. It went 400k happily..with 395 hp..stock
Does that say vortech Max but it's a 4.8 they should have been vortech MIN
Did you notice any big difference in gas mileage?
One question how did you get them mold out of the S 14
How much would it cost for me to bring my truck to y'all and get a cam put in?
I was wondering what happened to this channel. What was the reason for the name change?
Nice color bro! 👍🏽🔥💯
Ask your builder if he’s got a reliable reference in Houston.
Midnight performance
Is it street tuned ?
I did a stage 3 TSP chopacabra cam and its now stalling bc i need to tune it.
I have the same problem the ticking on my 06 Silverado 1500 4.8L crew cab… how can I get rid of that ticking????
Wants a reliable truck * cams it
Damn bro, I wanna get a cam for my 4.8.
I've got an 08 Tahoe I'm trying to build too 😂 I thought the 4.8 was a throw away when I bought, but I've seen some dope builds since then
@@jewbabydono the 4.8 is exactly like the 5.3 just less hp. And has better torque on top end. You can tune the 4.8 with out even many mods. Check out LS swap guru he does alot of tuning for this 4.8 trucks.
What kinda tuning did you have to do?
I have a 4.8 I want a cam that give me lower end power and that chop also I wanna upgrade my parts if I have too
I got a 2000 sl 1500 3 door 4.8 and Im wanting to do this same thing to mine. I just wanna know how much it costed. Is all I'm asking.
You should install a psi
why do you have a vortec max badge if your engine is a 4.8 and not a 6.0?
My 6.2 c6 needs that cam
You’re gonna get a hotter cam if you win🤘🔥
By any chance do you know the name of the color of your truck. I think that shits fire
HEY WHERE YOU GUYS LOCATED?
Where are you guy's shop located? I need my 09 seirra done ASAP
What do you haul with it? Mine struggled with my trailer and sxs
Need to tune it man
This is the exact wheel setup I want what size and name are those?
Is the cam and springs you guys used in the t/a on ur guys website?
You’ll have to call or text direct to get it. Hit up sales@madhatgarage.com or 337-346-3444
What exactly did u do and how come u can go past 100
I really wanna know what it sounds like when it has a supercharger on it BTW how much power
@337speed do y’all still have the corvette?
🔥🔥🔥
What soze tires do you have on your 24s?
Just came across this lol. My 04 Tahoe has a lifter tick and i wanna do a cam swap!
I got rid of my tick with a melling HV oil pump, it’s a must.
Have any videos of the exhaust setup? Looking to do the same with my 04
Is that a caddy cluster?
How many miles do you have on it when the lifter tick started?
200k
Nice stance. Wheel and tire sizes? And are u on stock height?
Yup stock height
@@337speed what size wheels and tires bro i want the exact same stance for my 06 z71
24” Snowflake Reps in black. Tires are 305/35R24 Mazzini Tires
@@337speed thanks, ill be going with a tire thats 275/45r22 so this gives me a good idea of how it will look
Can you send me the link of where you got you cam
How much you guys spend on all parts?
💯
I got my btr stage 3 v2 cam installed in my 01 chevy cam i floor it or wait a little
id change that right rear tire on your bread and butter lol shes a little bubbly
What cam stage?
Is that the 2007.5?
Done
What state ?
Dos it waste alot of gas ?
boy that 60 on that .323 stock gear 😅
No stall ??
Easy $4k for that swap.
Not if you do it yourself. I just rebuilt my entire top end. Everything brand new with a BTR cam and new timing set. New intake, injectors, plugs and wires as well. I got about 2500 in the whole thing.
Hey out of curiosity I thought the vortex ax where 6.0 or 6.2 am i mistaken?
The vortec Max package is a 6.0 all he did was up badge his 4.8
What’s size rim and tire
Where you located
Cam giveaway bro!!!!!!! I neeeed one for my tahoe!!!
Awesome video! Im in the same place and I will be doing it without any problem. I want to do the same set up. Question, could you give me the parts list for it? Please
If you are really going to do it. Why do you need a part list?
@@blackericdenice a little late on the reply. It’s done.
Why the name change?
yo what color that truck ?
Why don’t u guys just pull the whole engine
You need some 4.56s 👌
Next thing I’m doing is gears🔥
4.11
3:73
You ever drive in tow mode? Its like a tune. Different shift points and fuel ratio
Does it even help though? Like outside of changing shift points to help the Trans when towing
You're crazy lmao all it does is increase line pressure and lockout od
tow haul just makes the truck only shift on WOT. You will not go faster like a tuned truck does.
your rr tire has a bubble in the sidewall...
So about how much was spent on parts?
In the description the link to the cam said $390
Who did your tune on your truck
Mad Hatter Garage in Broussard, LA
What would be considered a mild, but not wild cam for a 2008 chevy 4.8?
212/218 or 216/220 for a "performance" upgrade or a 206/212 if you just need an upgrade while fixing lifter issues
Actually the SCDP Truck Torque cam increased power all across the band and is considered a very mild cam.
I got a 212/218 on my stepside
Any updates on the 2 door box
Did you ls swap yet?
Vortec max 🤣
I’m from Lafayette. Wondering if that’s where y’all are at? 337 and your accent kinda seem it. But not sure. Anyhow is it a vortec max or a 4.8 or and I just ignorant?? Please help me out my head is scratching
Yep Lafayette, it’s a 4.8 with Vortec Max badges. I thought they looked cool😆
Shop is in broussard
I need some help , my 2002 Silverado has a very bad fuel problem . I put about 19 gallons of fuel and I get about 150 miles when I’m suppose to get around 280 . It turns off and it has a hard time turning on. Where are you guys located ?
We are in Broussard, Louisiana
Any update on the 86 MC
Will be out this week. Have a video being edited right now
Bro Where are You Located?
Nope he sold that like a year ago I want to say and got his caddy
@@whipaholictv what lol 🤣🤣🤣🤦🏾♂️🤦🏾♂️🤦🏾♂️
Broussard la
@@madhattergarage1613 you're just 5 hours away
@@BuiltByLondonRacing where are you located?
What’s the cost for a job like this
I've been told expect 20 hrs plus parts a decent cam kit is 1k+ don't forget Dyno talking 2500 easy less you do the work yourself
Did it need a tune or new converter with that cam?
Needed a tune, converter nope not as aggressive. The truck needs gears ASAP tho
What cam did you go with
4.8 Stage 2 High Lift from Cam motion. 202/206 .527/.527 114+4 LSA
@@337speed awesome man! Looking to go with a stage 2/3 of some sort for my ly2 as well in the future!
Sounds like it has duals but it's still stocked🔥
@Chance Guy did you order it yet? There's that 209 218 cam summit has its a bit bigger would be perfect for the 4.8
@Chance Guy let me know if the mail order tune works. I did on of ebay, no go.
What ever happened to Nigel
He works a lot, we still cool😆
@@337speed oh that’s good to hear 😎💯
I sub for the give away I got a 08 4 door 4.8
My truck is way faster than that