Trasformazione di una Kawasaki Vn 800 bobber!!! il mio primo progetto custom, con tanta passione e voglia di mettermi in gioco, questo è il risultato... buona visione!
So much negativity! I say do what suits you in terms of time, budget and expertise. If the man chose to use BCB, then so be it - nothing wrong with that. For the detractors - go piss up a rope and if you manage it, don't break your arm patting yourself on the back. Nicely done - great looking bike, and well done. Love the video.
Nice job Marco b a lot people comment trash talk but the bike looks way cooler than when you started the video editing was fun.... And....you did all the work hats off to you sir!
Ti ringrazio tantissimo, te li stai guardando proprio tutti 🙏🙏🙏 Sì questo è stato un progetto che mi ha dato molta soddisfazione, il mio primo progetto portato sul RUclips
@@B_Redbeard_biker ho venduto la mia il mese scorso ed ora sono indeciso tra una vn800 e una xvs650 magari anche come base per un bobber, tu quale delle due mi consigli?
@@victorhoffman4560 diciamo che entrambe hanno una buona base, e soprattutto hanno i sostegni parafango posteriori removibili, e non è poco... Se segui il mio canale tra qualche mese pubblicheró un lavoro fatto sulla xvs 1600 dove ho dovuto scatenare il flessibile... Tornando alla scelta da fare, entranbe bellissime moto, ma sinceramente, il cardano su quel genere di moto, a mio avviso, esteticamente, è un cazzotto in un occhio, e anche se le yamaha le amo, Se dovessi scegliere tra le due un mezzo dove metterci le mani, Ritornerei sul VN 800
Hey RedBeard, I enjoyed the Bobber video. I especially enjoyed the Bobber building music. In fact, instead of watching anymore Kawasaki 800 Bobber builds, and there a few of them, I'm going to listen to the long version of LaGrange by ZZ Top. One of my all time favorite songs.
Ciao, grazie mille 🤟.. allora ti dico, Ni.... So che dopo averla venduta è stato fatto questo esperimento, io personalmente non mi sarei fidato, soprattutto per 2 motivi... Il materiale del paragrafo posteriore era una lega moooolto leggera, e sai, se si spezza il passeggero finisce direttamente sullo pneumatico, immagina i danni che potresti causare alle ossa del malcapitato.... 2 perché il parafango stesso è vincolato al forcellone posteriore della moto, Quindi tutte le asperità della strada vengono scaricate direttamente sulla schiena del passeggero 😅😅😅 di sicuro non comodo
Ciao Alessandro Grazie mille, allora per cambiare le frecce, non fai altro che smontare quelle originali scollegare o tagliare i collegamenti e rifarlo sulla freccia che più ti aggrada.... Almeno io ho fatto così, Ho anche accorciato i supporti per renderle più aderenti alla moto
@@Alessandro-jk3vl a ok scusa ... Allora se non ricordo male ci sono 2 modelli di frecce montate sulla VN 800 ,ci sono quelle col sostegno nero, in plastica, nelle versioni più vecchie, che hanno fascetta, o collare che gira attorno alla base, apri le 2 vitine e fai una torsione in modo da aprire il collare... Poi ci sono quelle col gambo cromato, ma è passato tanto tempo che non ricordo bene dov'è la giunzione
Nice!!!!! .... 😍😍😍😍... I need a Seat like That for My vn 800 of 97....can you tell me the mark of the Seat or site for buy ir???? ... Thanks and congratulations
Nice but no front mudgaurd never understood that. it must wreck your bike stone chips. Perhaps a small black one to blend in with the tyre. Good job though
Yeh I dont get that either, if you live somewhere where it never rains maybe you can get away with it, here in the uk you just end up soaked and covered in crap! same goes for the back mudguard, you just end up with a streak of mud all the way up your back!!
searching for info on the fuel tap rebuild and while warching your awesome progress noticed you had yours apart? was the tap rebuild success? or did it fail after a few drives? doing mine soon. great video by the way!
Good work! Did not seem like much work to fit the rear fender? Did you cut the frame and not includ it in the video or was it only to us a normal tool and scrue it off?
You can always make one yourself but if you dont want you can always check Blue collar bobbers. I bought mine From Ebay, it fitted in a dyna but i made a couple of holes and fitted it into mine.
Si però grazie al cazzo...hai messo i pezzi già smontati...poi hai voluto fare credere che si toglievano semplicemente.... 😂😂😂Poi i pezzi da Compare Collar bobber chi sa quanto ti ha pelato tra spedizione e dazi doganali,facevi prima a non spendere soldi prendendo parafango di recupero e pezzi autocostruiti in garage.... comunque ottimo lavoro...
Cosa intendi per pezzi già scontati.... Poi il fatto che nel video tutto vienvia facilmente è ovvio... Vorrai mica che sto lì a far video da 3 ore a far vedere quanto bestemmio😂😂😂😂
@@B_Redbeard_biker potevi fare il video mica con slow motions.... ovvio,ma così non fai vedere nulla, poi hai comprato i pezzi dal bobber collare col cazzo che gli do i soldi a quel deficiente😂😂😂😂
Grande Marco ...sei numero uno ...continua così !
Grazie mille 🤟😉
Looks like an easier than most job with no cutting or welding required. Maybe even I can do it. Great video!
I ride a Harley bobber and I think that came out really nice. Well done!
thank you very much😎
Video created lots of ideas !! Thanx !!!!!
Wow it’s amazing what you can do in only 4 minutes 😮
Thanks 😉😉
4 minutes of video, but weeks of work💪
So much negativity! I say do what suits you in terms of time, budget and expertise. If the man chose to use BCB, then so be it - nothing wrong with that. For the detractors - go piss up a rope and if you manage it, don't break your arm patting yourself on the back.
Nicely done - great looking bike, and well done. Love the video.
Aaaa
Nice job Marco b a lot people comment trash talk but the bike looks way cooler than when you started the video editing was fun.... And....you did all the work hats off to you sir!
thats one hell of a transformation 👍🏻
Thanks
😉
@@B_Redbeard_biker cheers 👍🏻
Got a used 800 torn it down on 1st day and pretty much rebuilt the whole thing big difference..your bike looks dam clean
800 very nice motorcycle 💪
Thanks
@Peter Alexander don't like VN 800??
GREAT now it looks like a Honda Shadow !
FINALLY, A BIKE MOD VIDEO WITH REAL MUSIC... GREAT JOB... WISH I COULD CHANGE TIRES AS FAST AND EASY AS YOU... GLAD I WATCHED... THANKS FOR POSTING...
😉😉😉 thanks
This camera work…amazing! 😂🤣😂🤣
😂😂😂😂
Thank you 😉
Video di qualche tempo fa… ma già mettevi in mostra le tue doti da anfitrione! Un piacere seguirti!
Ti ringrazio tantissimo, te li stai guardando proprio tutti 🙏🙏🙏
Sì questo è stato un progetto che mi ha dato molta soddisfazione, il mio primo progetto portato sul RUclips
Bike looks great, thanks for the ZZTOP!
Thanks😉
really well crfted video-and the vn looks very cool-definite 10 out of 10 :-)
thanks so much ;-)
Ooooooooooooo
Love this bike!
Love this video!
Love this sound!
But you should show more the finished job
Thanks so much.
You're right, I should have shown the finished motorcycle from multiple angles 😉
@@B_Redbeard_biker ho visto dopo che sei italiano, scusa.
Ottimo video comunque
@@victorhoffman4560 si si, sono di Vicenza, grazie mille ancora😉
@@B_Redbeard_biker ho venduto la mia il mese scorso ed ora sono indeciso tra una vn800 e una xvs650 magari anche come base per un bobber, tu quale delle due mi consigli?
@@victorhoffman4560 diciamo che entrambe hanno una buona base, e soprattutto hanno i sostegni parafango posteriori removibili, e non è poco... Se segui il mio canale tra qualche mese pubblicheró un lavoro fatto sulla xvs 1600 dove ho dovuto scatenare il flessibile... Tornando alla scelta da fare, entranbe bellissime moto, ma sinceramente, il cardano su quel genere di moto, a mio avviso, esteticamente, è un cazzotto in un occhio, e anche se le yamaha le amo, Se dovessi scegliere tra le due un mezzo dove metterci le mani, Ritornerei sul VN 800
Nice Bike, nice vid dude! Cheers from Germany
Awesome customization! Greate job!
very kool creative vid
Good look man
The bike is awesome but just so you know i liked the video for zz top.
Hoi
Real nice job. Nice video also. Best of luck
thanks
Hey RedBeard, I enjoyed the Bobber video. I especially enjoyed the Bobber building music. In fact, instead of watching anymore Kawasaki 800 Bobber builds, and there a few of them, I'm going to listen to the long version of LaGrange by ZZ Top. One of my all time favorite songs.
Schönes Bike super Video gerne mehr davon :)
Nice Bike great video
Thank you very much
😉
Aaaa
Bellissima!si può applicare il sellino a ventosa x il passeggero?tiene il telaio del parafango posteriore?
Ciao, grazie mille 🤟.. allora ti dico, Ni.... So che dopo averla venduta è stato fatto questo esperimento, io personalmente non mi sarei fidato, soprattutto per 2 motivi... Il materiale del paragrafo posteriore era una lega moooolto leggera, e sai, se si spezza il passeggero finisce direttamente sullo pneumatico, immagina i danni che potresti causare alle ossa del malcapitato.... 2 perché il parafango stesso è vincolato al forcellone posteriore della moto, Quindi tutte le asperità della strada vengono scaricate direttamente sulla schiena del passeggero 😅😅😅 di sicuro non comodo
Potresti spiegarmi gentilmente come sostituire le frecce anteriori, della moto vn800. Complimenti per i video
Ciao Alessandro Grazie mille, allora per cambiare le frecce, non fai altro che smontare quelle originali scollegare o tagliare i collegamenti e rifarlo sulla freccia che più ti aggrada.... Almeno io ho fatto così, Ho anche accorciato i supporti per renderle più aderenti alla moto
Grazie del consiglio,forse non mi sono spiegato bene, volevo sapere come devo fare a smontare le frecce vecchie.
@@Alessandro-jk3vl a ok scusa ... Allora se non ricordo male ci sono 2 modelli di frecce montate sulla VN 800 ,ci sono quelle col sostegno nero, in plastica, nelle versioni più vecchie, che hanno fascetta, o collare che gira attorno alla base, apri le 2 vitine e fai una torsione in modo da aprire il collare... Poi ci sono quelle col gambo cromato, ma è passato tanto tempo che non ricordo bene dov'è la giunzione
@@Alessandro-jk3vl se vuoi contattarmi su Instagram così mi puoi mandare le foto. Stesso nome del canale
Looks awesome
thank you very much, look at my RUclips channel, my next creation is coming
😉
Will do and subscribe
Nice work Bro, Bike looks awesome!!!
I'LL be living' this video soon:)
thank you
nice looking bike.
Some small advice: keep the tank till the last part.
I'm sorry, but I don't understand what you mean
😉
@@B_Redbeard_biker It is easy to damage the tank, so put it as the last part.
@@corneilcorneil A ok ok, thanks for the advice 💪
Nice!!!!! .... 😍😍😍😍... I need a Seat like That for My vn 800 of 97....can you tell me the mark of the Seat or site for buy ir???? ... Thanks and congratulations
hello, thank you very much 🙏
the seat is produced in blue collar bobber 😉
@@B_Redbeard_biker thanks for your reply!!!!!.... 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Hello motobrоther. Good jоb, good project. Tell me, what did you do with the wheels, painted in white? What was it?
From Kazakhstan. Sanks
Hi bro
Metzeller white wall tires,
Factory original
nice bike! good job man
Thanks so much :-)
To nail it down, paint yer front fork lowers black. Oh, 2014, too late... ;-)
Nice work dude :D looks great :)
Nice
thanks😉
thank you so much
Nice but no front mudgaurd never understood that. it must wreck your bike stone chips. Perhaps a small black one to blend in with the tyre. Good job though
Thanks. In the next creation I will do better things
Yeh I dont get that either, if you live somewhere where it never rains maybe you can get away with it, here in the uk you just end up soaked and covered in crap! same goes for the back mudguard, you just end up with a streak of mud all the way up your back!!
@@haydneasy9736
😂😂😂 Real
I live in Italy, it rains little in the summer. But it's raining, it's true, you live in a fountain without a fender
You might not get this message but what did you use on the tyres to get the white
I Remember metzeler tyres😉
👍show 👏👏👏
Very nice video, cool transformation BUT i want to hear the sound of the bike with the new buffles.
Did you rejet the carbs?
searching for info on the fuel tap rebuild and while warching your awesome progress noticed you had yours apart? was the tap rebuild success? or did it fail after a few drives? doing mine soon. great video by the way!
really nice bike man! at the end, did you find a way to make your white wall tires or did you buy them?
What size tires did you use on this build looks a bit of a wider tire
hi, I used the original measurements! 😉
@@B_Redbeard_biker was that the mt 90-16?
@@johnrorrer7162 yes, 130/90/16
@@B_Redbeard_biker thanks man appreciate you responding so quickly
great job. what u do with old parts. Any for sale.
grate video thanks
Id really like to do something like this to my bike just dont know where to get the stuff to do it I have a 2002 Vulcan 800 Classic cammed to 1100
Blue Collar Bobbers, they have kits to fit many makes and models.
Ooooooo
Where did you get the rear fender from?
Hallo😉
The fender made Blue collar bobber
Good work! Did not seem like much work to fit the rear fender? Did you cut the frame and not includ it in the video or was it only to us a normal tool and scrue it off?
Not bad for a bolt on kit
Hey man where did you get your parts, like the fenders etc
Looks like Blue Collar Bobbers. Bolt on kits. I Love mine.
Vid great , music brilliant I'd appreciate any info pleas
Thanks, what information do you want?
😉
@@B_Redbeard_biker which album is the music off, ZZ TOP comments say. Again great vid lovely bike.
@B Redbeard biker what's that white paint did you use on wheels please ?
comment tu as fait pour peindre les flanc des pneu ?
Where can I get that rear fender for a Kawasaki Vulcan. I can’t find one anywhere
You can always make one yourself but if you dont want you can always check Blue collar bobbers. I bought mine From Ebay, it fitted in a dyna but i made a couple of holes and fitted it into mine.
George Pet yea I googled it but I can’t seem to find them for Vulcans. I may have to special fit it. I’m just hoping my stock tire isn’t too big
Hi, look in blue collar bobber 😉
B Redbeard biker I’ll try them
@@BoneGoddess😉
Awesome!
- Was it as simple as you made it look to do though, or did you run into any problems?
Thanks so much
no problem, with only a few plant elttrco, but little personal competence!
TOTALLY fucked up a. Nice bike!
nice... ;)
parts where?
Blue collar bobbers 😉
Супер!
che cosa ha fatto il vostro lavoro di vernice si esegue ?
i never put chrome parts on the floor front faced :) anyone ?
Sorry, I do not understand what you mean!
@@B_Redbeard_biker when i take off my chrome side covers, i put down on the floor chrome side upwards to prevent damage
@@apeanger Ok ok, I get it, it's a good method
hello kit saddle and fender where to buy them
May i ask what are the size of the tires?
How much did tht kit cost I have the same bike
you can go to blue collar bobbers and see, is about 300 for the seat and 300ish for the rear fender with lights ** I think**
The kit, Shipping Fees, 850 euro
where did u buy this fender
What’s tires?? I love them
Metzler😉
Hey dude, how did you get the Whitewall done ?
Sebastien Boudreault spray paint!
What handle bars did you use?
Artisan bar
Stolen bars!
How did you do the White walls?
Bonne Michel They were bought. You cannot turn old tires into whitewalls.
mascherano?
Hola, no entiendo 😉
Where u order that rear fender
Ciao Giovanni, il kit l ho ordinato su Blue Collar bobber
😉
Isi
porque se aumean las bujias
Nice video, lose that rear fender and green color. Or not, is your bike.
beautiful bike but it's bad luck to paint a bike green
I ll buy the old pipes from you
Si però grazie al cazzo...hai messo i pezzi già smontati...poi hai voluto fare credere che si toglievano semplicemente.... 😂😂😂Poi i pezzi da Compare Collar bobber chi sa quanto ti ha pelato tra spedizione e dazi doganali,facevi prima a non spendere soldi prendendo parafango di recupero e pezzi autocostruiti in garage.... comunque ottimo lavoro...
Cosa intendi per pezzi già scontati.... Poi il fatto che nel video tutto vienvia facilmente è ovvio... Vorrai mica che sto lì a far video da 3 ore a far vedere quanto bestemmio😂😂😂😂
@@B_Redbeard_biker potevi fare il video mica con slow motions.... ovvio,ma così non fai vedere nulla, poi hai comprato i pezzi dal bobber collare col cazzo che gli do i soldi a quel deficiente😂😂😂😂
I think the BCB kit is a cop out . Be creative , make the bike that YOU want ...not some pre fab'd cookie cutter shit.
and another bcb bobber hits the road. I dont see an ounce of creativity just a bolt on catalog bobber!
green ? ble
How to fuck up a nice motorcycle in 1/2 a day! OMFG! Idiot!
How to Fuck Up a nice bike in a short period of time! IDIOT !!!
Not cool. buying parts//
Nice