HEATBOYS HB0018 LEONARDO NINJA TURTLES MECHATRAN TMNT Mecha action figure Q.Review 444
HTML-код
- Опубликовано: 17 окт 2024
- Buy here:
ebay.us/hRlGy0
HEATBOYS HB0018 LEONARDO NINJA TURTLES MECHATRAN TMNT Mecha action figure Q.Review 444
Also check my Selected Toys:
www.amazon.com...
Dynamic Base Display Stand Bracket for 1/6 1/9 1/12 Scale Action Figure
ebay.us/IoBSWt
My electric Display : rover.ebay.com...
Base board I used: www.ebay.com/s...
My Filming Tools www.amazon.com...
How were your lower knee joints? I had to dismantle the right one to apply kiki to tighten it up, was a pain getting screw covers out had to destroy it just to pry it out.
I just got mine 2 days ago, and I've been busy, but mine has BOTH knee and elbow joints loose as hell!
And yes, the same parts from other reviews are so fKng hard to move...
And the freakinggg paint!! Chips all over the place and just a sligt bit of friction that is almost imposible to evade, scratches it.
Whyyy????
You have to be EXTREMELY careful and delicate with ALL the freaking figure, even with the small turtle and the few accesories, as the plastic quality is horrendous (it's a joke); even the garage structure, all feels like a model kit plastic material, and all joints will eventually get loose (unless yours already arrived like that).
Several fails on the articulation, like the fingers.
I'm so fKng pissed off 😡
You need to unscrew the head to put the batteries in?? Why?
Besides that (that "that" makes the crappy but simple bad ingeneered transformation a lot more complex and frustrating than it actually is...), it has a nice design.
Thank you for this transformation video. I am extremely disappointed in this. Quality control issues everywhere. joins too tight. Certain parts dont fit in their holes without me shaving them with a blade. As good as the mecha turtles were, this one is the opposite bad. The sword holder than holds teh front of the van on mine had to be shaved to work. That shouldnt be at this price point.
How are the joints? Heard the leg snaps, so did you find the leg joints to be weak during the transformation?
I just got mine 2 days ago, and I've been busy, but mine has BOTH knee and elbow joints loose as hell!
And yes, the same parts from other reviews are so fKng hard to move...
And the freakinggg paint!! Chips all over the place and just a sligt bit of friction that is almost imposible to evade, scratches it.
Whyyy????
You have to be EXTREMELY careful and delicate with ALL the freaking figure, even with the small turtle, as the plastic quality is horrendous (it's a joke); even the garage structure, all feels like a model kit plastic material, and all joints will eventually get loose (unless yours already arrived like like that).
I'm so fKng pissed off 😡
The robot mode is Good not so much with the van mode
Turtle power!
😎😎😎
What are you doing? The other turtles? Are there just doing Leonardo?
looks they planned to make another tarnsformable TNNT
@@SunOfTheEmpireso far, Donatello will be a Helicopter (But why?? Leonardo's swords would fit betterr for the propellers), and Raphael a kind or a tank...
sooo how many people have pointed out you put the dish on the van backwards hehe
The turtles are trying to get a Direct TV signal. 😂😂
@@doro626 LOL
Now we just need Mikey as the turtle blimp and as for the other two I've no idea
the one wear purple and red scarf..
We have seen the prototype for Donatello he turns into a helicopter. I'm guessing to be like the old toy if you had it growing up. But yes we need one of the turtles to turn into the blimp. I'm not sure what Raph would turn into. Maybe a tank I guess they would have to look at all the old toys and see what could work.
@@roonis418a tank would be bad ass.
👍👍👍💕💕💕😊
thx
epic!!
Cowabunga!!
😎😎
Any comments on the leg / foot I hear that they could snap off.
the peg is extremely tight. So tight that I completely removed the screw and it didnt loosen. The plastic tolerance is all wrong.
@@doro626 so once you remove the screw did it work better? or did you have to do something else to loosen it?
@@roonis418 SO I took the screw completely OFF. To be clear there are TWO screws in that area. I have see the plastic tear off on another video review ( it says I broke it in the title). I removed the black screw that has a built in washer. When i took it off, the tolerance between the foot and the peg is was on was so tight I still couldnt get it to turn . I had to rock the piece back and forth in slow increments until I felt comfortable. Im not sure if lithium grease degrades plastic, otherwise i would have put some of that on it.
9:55 Also at this part. Take note that the yellow plastic is holding onto that grey round piece. So you cant flip the wheels out , unless you pull down slightly to un-notch it. You can see the motion on the left foot better than when he did it on the right. Use a spudger or plastic pry bar. More than a few joins I had to push a part slowly. They use metal ones in a lot of these videos, so it you are comfortable using metal on plastic, use that.
@@doro626 Thanks this was pretty helpful maybe you could do a quick video on which screws and washers you removed so people can see which ones so they wont have any brake issues. I don't have mine in hand yet its on the way but before I mess with it I want to remove or loosen the problem areas.
Those joints don't sound good atall
They SUCK!!!!
Really, they are really bad. Every move feels like it's breaking... It's scary to handle (and I do have experience with 3rd party transformers and Masterpieces).
I just got mine 2 days ago, and I've been busy, but mine has BOTH knee and elbow joints loose as hell!
And yes, the same parts from other reviews are so fKng hard to move...
And the freakinggg paint!! Chips all over the place and just a sligt bit of friction that is almost imposible to evade, scratches it.
Whyyy????
You have to be EXTREMELY careful and delicate with ALL the freaking figure, even with the small turtle and the few accesories, as the plastic quality is horrendous (it's a joke); even the garage structure, all feels like a model kit plastic material, and all joints will eventually get loose (unless yours already arrived like that).
Several fails on the articulation, like the fingers.
I'm so fKng pissed off 😡
You need to unscrew the head to put the batteries in?? Why?
Besides that (that "that" makes the crappy but simple bad ingeneered transformation a lot more complex and frustrating than it actually is...), it has a nice design.
オリジナル性が皆無意味ねー