"One of the things I really hate is starting projects and not finishing them".... First line is completely relate-able lol. Keep up the great work man!
What I'd suggest is modifying the protection circuit to allot for a slightly higher current draw for 4B to fully function. And to still protect the battery.
this would be interesting to revist and add "morphing" legs ...using the same tech used to make morphing wing trailing edge ...it would allow each leg to "stretch"
Is it just me but this is the first vid I watched of this guy and the first thing I noticed was that jawline he could bite the titanic and make it sink
Hello can you explain the math you used to figure out the acceptable weight? You mentioned the length of the leg and the torque of the motor. What is the formula? Do you have any reference you could share as I am trying to figure out what motors will be best for a project. Thanks
Can u please make a detailed video of the tutorial to make it and provide the links to buy the 3D prints and other items required for making it. Actually I wanna make one for my school exhibition.
If you dont mind advice i would incorporate drone propellers into the legs a small panel would open exposing the propellers for flight they are small enough to be added into the planet exsploration rovers.
Tiny little cell, not enough energy to really worry about, just add a flame barrier and program the robot to open up to vent flames of it gets too hot ;)
Be careful with cheap crocodile wires. I got same issue with dropping down power at developed device with same wires and I took time to figure out that trouble was not at accumulator or schematic.
the movement seems quite jerky. maybe you should add some code to smooth its motion out a bit more, perhaps making it lower its acceleration at times of high power consumption to fix the current limiting problem.
A great thumbs up to you as well as to your project.👍👍👍 If you don't mind can you please let me know which module or ic do you use to have bluetooth functionality in your projects.
5:07 Scientists: The reason for the phenomena is **technobabble** Normal people: Wow that's so cool!!! Dj's: Keep the beat lemme drop some music **proceeds to do DJtech**
When your plan fails blame the programmers
That’s the robotics motto
What happens when the programmer is robotic?
Run
😁
@@CarlBugeja Then it's the programmer's programmer that is to blame.
LOL
That's literally an electric bakugan.
Or a transformer.
Or a quadpedal spherical robot.
droideka
Or a type of turret from Portal 2 or 1
Or a death machine if you give it a laser
its bakudan
e g g
5:54 "Make sure my type casting is on point" I felt that. As a Java programmer, I felt that.
Thanks for sharing your talent! You have an excellent understanding of electronics and mechanics.
Come oooon duude! Tuesday feels an eternity away :D
Haha 😂 I had to create some suspense
Tru
This man is a real engineer
When he said the robot is almost the same size as a baseball, I imagined someone mistaking this thing for a baseball a smacking it with a bat
Amin
"Oh Noooooooooooo!!!"
This is my favourite project of yours and I'm so glad to see it's back! Can't wait to see the results!
It would be cool to see this being shot out of an air canon and reach hard to get places.
Watching this made me realise how useless i am as a 3rd year robotics student. Someone please tell me where can i learn to make robots like this?
in school or this video
@@Rctdcttecededtef yeah that’s helpful -_-
best friend
RUclips:D
MIT
Don't say that you are useless, only realize that there is much to learn. To the google!
I’ve always thought one of these in reality would be cool.
this channel will blow up
Vosem I totally agree
"One of the things I really hate is starting projects and not finishing them".... First line is completely relate-able lol. Keep up the great work man!
"relatable"
@@hongkongshitposter Thanks
Your English is most relaxed accent i ever heared
Man, those are quality robots and ideas ,...u must have more subs
This man is gunna change the world, I just know it!
The project is so difficult ! Hats of to your hardwork !
Duuuude this has really inspired me to pick up an old robot project I had a while ago. Great work!! (btw 4b looks sooo cute)
I’m so gonna wake up one day with that thing scanning my face
What I'd suggest is modifying the protection circuit to allot for a slightly higher current draw for 4B to fully function. And to still protect the battery.
this would be interesting to revist and add "morphing" legs ...using the same tech used to make morphing wing trailing edge ...it would allow each leg to "stretch"
If you paint that gold, it would be a Dwemer robot from the elder scrolls
Dwemer spider bot. I can't remember what there called lol
Is it just me but this is the first vid I watched of this guy and the first thing I noticed was that jawline he could bite the titanic and make it sink
Smart invention
I was confident it was going to explode in the end hahahah
Lol same! here :
ruclips.net/video/dQw4w9WgXcQ/видео.html
Merry Christmas!
:)
Wilfred Reedman You jerk how could you
I wish I was educated enough to make stuff like this.
I am going to watch all your videos to create some new projects thank you bro thank you very much
Whoa it's like the sequel to the MorphHex robot that Zenta made back in the day!
You are real legend
JESUS CHRIST how didn't i find your channel sooner
A big thumbs up and like for you to continue your old project and make it a life again
Hello can you explain the math you used to figure out the acceptable weight? You mentioned the length of the leg and the torque of the motor. What is the formula? Do you have any reference you could share as I am trying to figure out what motors will be best for a project. Thanks
That is really neat. Can't wait to show my kids.
Very nice project!!
Can you please make a tutorial video on this controller board, as it will be very useful for the beginners like me?
I wish one day u have 5 million subscribers
This is cutest thing i even seen in my life can i buy one?
Can you make it roll itself as well
Well done 👍👍👍
Oooooooooooooooooooooooooooo that’s just wayyyyyy toooo cooollllll dude no is doing such complicated stuff on RUclips!!!!
im getting so much Aperture Science vibes
Super cool
This little robot is soo cute i wish i had one
Get a BAKUGAN
Cool robot
Make a a digital cube nice project thank you sir
Nice video !!
i want to make one, but i must repair my 3d printer first :)
Awesome project. Excited for Tuesday.
I remember when I was a kid I wanted something exactly like this
amazing work, you are a good example to me ♡ ♡keep innovation
Nice robot, great video!
RUclips : What are you doing?
Me : Nothing, why ?
RUclips: I will recomand you this video :)
Dude that's like straight out of Deuse Ex invisible war lol. All it needs is a Taser lol
It’s an egg-former
Egg-formers robots in eggs
That comment goes perfectly with your profile picture
Well atleast its not an Eggman robot
Just suscribed for your hard work
Hi great project as always.. can you share you basic schematic design such as microcontroller, power module and motor driver ? thank you very much!!
Can u please make a detailed video of the tutorial to make it and provide the links to buy the 3D prints and other items required for making it. Actually I wanna make one for my school exhibition.
Your all projects are absolutely amazing.
You are genius
9:07 I like that smile
that's future bro, amazing project
Nobody:
Luca: Silentio Bruno!!
Everybody gangsta till the baseball starts walking
woow keep up the good work dude and make Malta proud :)
2:59 This background music is the same that's used when Bruce sings about Reggae coming before Ska
nice
You are really genius you give solution to my problem
Can you say me which book that you used to refer about that coordinates
Thanks! I have looked at several paper on the subject.. But then the ik were derived from scratch (this was part of my engineering thesis 3yrs ago)
If you dont mind advice i would incorporate drone propellers into the legs a small panel would open exposing the propellers for flight they are small enough to be added into the planet exsploration rovers.
This is very impressive. You just got a new subscriber! Keep up the good work. :D
This is Amazing
Literally looks like a miniature droideka.
I think your room fulfills with electronic components🤔
Next Tuesday never came
Tiny little cell, not enough energy to really worry about, just add a flame barrier and program the robot to open up to vent flames of it gets too hot ;)
The surge current of the servos might be exceeding the limits of the battery.
I like your new outro! Keep that! ;)
Also nice project and video! Can't wait for the next one! :D👌
*Master, Destroyers!*
You should do more vids about building robots
Be careful with cheap crocodile wires. I got same issue with dropping down power at developed device with same wires and I took time to figure out that trouble was not at accumulator or schematic.
i totally understand what you mean but the current drawn by the robot is 600mA max so the wire drop shouldn't effect it that much
@@CarlBugeja I got this issue with eps8266 project. In peaks it takes up to 200mA and exact in this moments I got much lower voltage on device.
@@CarlBugeja just check wires and especially how are they connected to crocodyle, I got some of them without any soldering at all)
Now we need a cookie quad robot. To steal the moon.
He sounds like ivan from iron man 2
get him his bird
@@landonlomenick5175 🤣🤣
Idk why i fell uncomfortable to hear that
@@landonlomenick5175 berd
Awsome robotic model
Please describe about "hollow graphic watch".. I am interested in this project
the movement seems quite jerky. maybe you should add some code to smooth its motion out a bit more, perhaps making it lower its acceleration at times of high power consumption to fix the current limiting problem.
Increíble trabajo Carl.💎
A great thumbs up to you as well as to your project.👍👍👍
If you don't mind can you please let me know which module or ic do you use to have bluetooth functionality in your projects.
Thanks! I am using the cyble-022001-00
@@CarlBugeja thank you 😇
Excellent - a cliffhanger
I am watching for Tuesday video 📹
1:03 I had exactly zero knowledge about what you even said.
Lmaoooo same
5:09 a transformer and it plays Mexican music
9:16 oh my god that tease, when she claims duress when signing the prenup
Nice! awesome stuff Carl.
How about a rolling robot that moves by shifting an internal weight (battery?) to become wobbly.
the idea its k, but think imprinting spin spring at all edges to avoid critical damage towards the electronics
Your gonna be the next ironman
Nice 👍🏽
"If Harry potter was an electronics engineer"
Make a drone ball so u can play catch with yourself and it flys back
Гари поттер ушёл в электронику. Отличный канал
Я часто смотрю ваш ролик, интересно и классно. 👍
5:07
Scientists: The reason for the phenomena is **technobabble**
Normal people: Wow that's so cool!!!
Dj's: Keep the beat lemme drop some music **proceeds to do DJtech**
Very good I like you thinking 👏👏
Literally a year later rather than next Tuesday still hasn't posted the test.
I just found about these servos, but they seem to be sold out all the time