How to update TBS tango 2 Firmware ?

In This video I am going to show How to update TBS tango 2 Firmware ?
Upgrading TBS Tango 2 firmware is very easy you need tbs agent X app to connect to computer and then download the latest firmware and update it.

[@rayhastings2934]

It should be mentioned after you update, you have to calibrate your sticks on the controller or they won't work. Hope this saves someone the hassle. :)

[@mr.j9232]

Omg,ur video help me a lot,thnk you very much sir..

[@FPVWhoop]

Thanks 🙏

[@sully4875]

Thanks 👍🏻👍🏻👍🏻👍🏻

[@stevensbox9625]

Your videos are very informative and put together very well. I've been trying to convert my GEPRC Mark3 to bind to a TBS Nano receiver but failed to do so. I tried the UART6 and even the SBUS but nothing seems to work. If you have any experience in this area, I would appreciate your response. Either case, keep producing videos. Its great to a new FPV hobbiest like myself.

[@FPVWhoop]

Try these steps
Step 1- You need to connect ch1 to rx6 and ch2 to tx6, any gnd and +ve
Step2 - bind ur radio
Step 3 - enable uart6 serial Rx in BetaFlight and disable everything in that row
Step 4 - in the configuration tab inside receiver block, second dropdown select CRSF and enable telemetry and press save
Step 5- check in receive tab if radio stick moment shows, if not try different channel map from dropdown
I hope this should solve it, even after that it does not work. We can come chat over skype.

[@stevensbox9625]

@@FPVWhoop Thank you for your advice. I tried exactly what you said and I have no stick movement response. I'm guessing that I have a bad TBS Micro. I ordered a few of TBS Nanos and will try again. This is so frustrating because I have 2 GEPRC Mark3 drones. I love the way they fly. I successfully connected a TBS Nano to my iFlight Nazgul. Used my TBS Tango 2 for the first time yesterday to fly it. Not a very good experience. Very twitchy, too sensitive. Had to go back to Angle mode. If the wind dies down today, I'll try again. Thanks again for your help. I subscribed to you channel. Keep up with making videos. God's speed!

[@FPVWhoop]

Where u able to bind it to radio ?? Try this command also after setting everything “set serialrx_inverted = OFF”

[@stevensbox9625]

@@FPVWhoop Unsuccessful at binding but will try your idea tomorrow. Thanks

[@FPVWhoop]

Try to bind first, let connect over insta of FB my insta is @fvpwhoop

[@dee1251]

my computer is not recognizing my tango 2 , why is that?? it does give me the three options when i connect the usb c but once i choose joystick it doesn't recognize it. is it cuz im using a usb c cable that came with my wireless headphones for charging them

[@FPVWhoop]

Could be, as some charging usbc wires only have power wires dont have data wires. Try some other wire which came with android phone or dji goggle

[@dee1251]

@@FPVWhoop yup it was the cable, thanks