CSWP segment 2 practice exam | BW Engineering
HTML-код
- Опубликовано: 4 окт 2024
- CSWP segment 2 practice exam | BW Engineering
*model files can be downloaded at below link
mega.nz/#F!RI0...
◘◘◘ CSWP Practice Test Book ◘◘◘
"Total 5 complete sets of CSWP exam including all segments, 2019"
You can download useful resources of CSWP test materials free
sites.google.c...
◘◘◘ Homepage ◘◘◘
sites.google.c...
It would be much more effective to have a pdf of this exam.
Hi, first of, thanks for this vid, and the previous one of course.
i found an error in q5. if i change the material to 1060 alloy aluminium the mass is 648.38, so it doesnt match with the mass indicated in the vid. Although if i leave the material at aisi 1020 the mass matches with the answer in the vid. 1849.07g
Thanks
you right , he stupds
Yes right
First of all I´m really really grateful for this video since there are no other videos on RUclips about segment 2 in CSWP. While I was modeling this segment, few time I´ve got wrong answers. If some one was wondering then material used in the videos are Q4 AISI 1020, Q5 1060 Al Q6 AISI 1020
Q6 is wrong. You got the answer 1184.72g by suppressing chamfer 2 and 3 NOT 1&2.
Question 8 asks for fillets and the cutting shape to be modified and re orientated and yet in the graphics for question 9 we are back to square one. Question 10 bottom view shows no groove across the bottom but the elevation shows there is still a groove.
This exam is almost impossible to pass in the short time given, even for an expert, considering you have to spend at least 10 minutes deciphering the questions.
First of all, thank you for the practice exam! I encountered error when changing C@boss-extrude1 from 30 to 32. Shell2 feature can't be built. Found out that the holes (Cut-Extrude3) are not "through all" but blind at 30 mm.
thanks! you are on time :)) I'm just preparing for CSWP segm. 2 exam.. and didn't find anywhere practice exam video as your's.. and yesterday you uploaded it! ) thank you!
These files are riddled with errors. In the first model, question 6 you ask to suppress chamfer 1 and chamfer 2 but the answer model you suppress chamfer 2 and chamfer 3. Similarly, cut extrude 2 is through holes but you have given a blind dimension. His does not cut thorough the model in config 3.
In question 6, it says, suppress Chamfer 1 and 2!! you suppressed 2 and 3 ?!?!
I feel thy pain.
can you post the pdf of the question set?
in 5th question you forgot to change material to Aluminum 1060 alloy, so I got 648.38 grams.
Thanks for pointing out. I'll make it change soon.
Hi I am getting 618.67grams. with alloy steel I am getting 1764.36grams. M2 config modified
Suppressing chamfers 1 & 2 causes some other issues for my part. If I let it let it auto-suppress chamfer 3, I get the answer in the video. Was that the intent of the question or was it a mistake? I can't immediately figure out how to fix chamfer 3 either. How do you fix it properly?
@@andrewsanders423 I got the same problem
@@MVRAR1 I passed the CSWP exam, so I think I'm good. Probably the same for you. Best of luck.
We would be grateful if you post one more CSWP segment 2 exam test for practice before exam :-)
HI, this video is awesome, but I think the pdf instructions is missing on download link.
Than you and god job.
thanks for the exam!
I think 40 min is a bit short, or maybe I'm just slow, took me 90 min to complete
There are a lot of mistakes in this
What material are you using in question 4 of 11?
Hello sir,
Model not available at the site.
Will you please provide the model?
3:49 what did you change for the shell?
In Q4 shell feature was gone. Is that normal?
is it possible for someone to get me this exercise in version solid 2016 or parasolid? it would be nice, thanks for the video though
CAN YOU UPLOAD LINK OF OTHERS PROBLEMS ?
the files no longer exist
Can u add the question paper pleas