ive been watching your vids as you upload them i like them keep it up i just figured out how to comment lol i had to change settings on my google crome! But ya keep building on the igo w 14 im loving it
Thanks bro. Everything should work fine, but i don't have my batteries yet. I just can't get that power out of these batteries what i use. I have to wait few weeks before i get the right ones and then i let You know how my igo vapes. :)
I have the same atty on the gladiator I had verticals 5/4 wrap on a 1/8 roll pin punch. (works great cause of the handle) wicked straight down and up top of the odds positive post it was smooth lots of vape. Had to bore out my holes to try a twisted build or parallels. Also thinking about trying six coils on this thing. Can you try that some time.
I will monkey around with 6 coils but it would definitely be a major pain to build. Let me see what I can do. The problem I see is having 6 coils and keeping the resistance safe I would have to pretty much double the wraps on each coil to keep it safe.
Try 26 gauge twisted wrapped around 7/64. Depending on how warm you want it I would probably do triple 5 to 6 wraps. Give this a shot and make sure you twist the wires tight and uniform.
Right on , I have a mnke battery , Im aiming for a .3 to .4 triple coil build . I usually use my set of precision screw drivers and they measure from 1.4 , 2.0. , 2.4 , and 3mm . So with that in mind what would you recommend ? I mean don't get me wrong I could always go out and by drill bits too lol .
Paul Robinson no need to buy drill bits, 1/8=1.59mm, 5/64=1.98mm, 3/32=2.38mm, 7/64=2.78mm, 1/8=3.18mm. you don't have to be precise on the inner diameter just approximate. Hope this helps
im running a single coil twisted 24 guage .4ohm it taste amazing
ive been watching your vids as you upload them i like them keep it up i just figured out how to comment lol i had to change settings on my google crome! But ya keep building on the igo w 14 im loving it
Thanks bro. Everything should work fine, but i don't have my batteries yet. I just can't get that power out of these batteries what i use. I have to wait few weeks before i get the right ones and then i let You know how my igo vapes. :)
I have the same atty on the gladiator I had verticals 5/4 wrap on a 1/8 roll pin punch. (works great cause of the handle) wicked straight down and up top of the odds positive post it was smooth lots of vape. Had to bore out my holes to try a twisted build or parallels. Also thinking about trying six coils on this thing. Can you try that some time.
I will monkey around with 6 coils but it would definitely be a major pain to build. Let me see what I can do. The problem I see is having 6 coils and keeping the resistance safe I would have to pretty much double the wraps on each coil to keep it safe.
is it possible to use only 2 coils
Yes you can use 1, 2, or 3 coils but you just can't change the top cap air flow to 1, or 2 coil mode you just get a little more air thats all.
I only have 26g kanthal what type of build would you recommend ?
Try 26 gauge twisted wrapped around 7/64. Depending on how warm you want it I would probably do triple 5 to 6 wraps. Give this a shot and make sure you twist the wires tight and uniform.
Ok cool thanks for the reply
Paul Robinson For a hotter build try wrapping around 3/32 or 5/64 and add a couple more wraps but always make sure you are using safe batteries.
Right on , I have a mnke battery , Im aiming for a .3 to .4 triple coil build . I usually use my set of precision screw drivers and they measure from 1.4 , 2.0. , 2.4 , and 3mm . So with that in mind what would you recommend ? I mean don't get me wrong I could always go out and by drill bits too lol .
Paul Robinson no need to buy drill bits, 1/8=1.59mm, 5/64=1.98mm, 3/32=2.38mm, 7/64=2.78mm, 1/8=3.18mm. you don't have to be precise on the inner diameter just approximate. Hope this helps