Eric de France. Super je découvre, moi qui fait beaucoup de modélisme ça va bien me servir surtout que ce sont des ingrédients facile à se procurer. Un grand Merci. 👍👍👍
Excellent ideas. One word of caution. I learned this the hard way a few weeks ago. I accidentally knocked my Les Paul guitar off its stand and seriously cracked the neck. Because I needed the adhesive to flow all the way into the cracks, I decided to use super glue because of its water-link consistency. I used a 3ml hypodermic syringe with 18 gauge needle which I filled with the super glue so that I could inject the glue deeply into the crack. I intentionally used a lot of glue hoping it would ooze out. I immediately attached the clamps to hold the neck back together tightly with the intention of wiping off the excess glue. At that very moment, I discovered how noxious the fumes are when using that much superglue. I couldn't breathe around it and it immediately left my eyes burning severely. Consequently, I wasn't able to rub off the excess glue which meant I had a lot of unnecessary sanding to do once everything set up. The next time I work with that much super glue, I'll wear a respirator and eye protection.
Perfeito, já conhecia a cola de plástico com acetona mas a grafite com supercola e bicarbonato foi novidade, a reconstrução da engrenagem foi incrivel.
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Man, as a longtime superglue/cyanoacrylate enthusiast I have to say these clever ways of making repairs rock! A refreshing change from all the clickbait and useless crap on YT.
@@creationholic101 1) Can u please confirm the ratio of how much graphite powder & baking soda you used in your video? Is it same amount for each (1 to 1 ratio)? Or more of one than the other? 2) what was that u used to apply the glue into the gear teeth filler space? Is that a special syringe/ applicator tip..where to get? 3) what is the purpose to drill the holes through the gear? (Wondering what is the objective for doing that..if needed or can skip this step etc). Thank you for a really amazing video !!!
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
You saved the best for the last! Your improvised gear repair is brilliant! If you really want superior strength, use graphene powder. As others have mentioned, cyanoacrylate fumes can be noxious (the first time) but actually deadly on repeat exposure due to sensitization.
wonderful ideas , however what is cyanoacrylate please explain its composition and strength , thanks and God Bless you for Shearing your wisdom and knowledge .
I use baking soda and graphite powder, generally depending on the color I need. Never have used them together. What does mixing the 2 together do for the finished product?
This idea to use graphite with baking soda will be great. I'm in drag racing rc, and you need to stiff the arm to make less flexible. This idea will help a lot and don't need to spend to much metal with I can make the arm more durable and stronger for fraction of the cost
Hola, me comunico desde Argentina, voy a provar la formula, me parece muy interesante, pero desde ya te digo, en nuestro Paìs, el pegamento que utilizas para el arreglo en Argentina ES SUPER CARO, un frasquito de ese tamaño, puede valer hasta 10.000 pesos, lo que utiliza una familia para comer en un día, muchas veces el preferible, comprar un nuevo elemento para reemplazar el roto y no tener que comprar el "LOSTITE" que es la marca comercial de ese super pegamento. Saludos y muy buenas tus propuestas.
Eric de France. Super je découvre, moi qui fait beaucoup de modélisme ça va bien me servir surtout que ce sont des ingrédients facile à se procurer.
Un grand Merci. 👍👍👍
Je fait partie du même monde que toi, si les astuces fonctionne vraiment je vais faire de sacré économies 😅
Glad you like them!
Excellent ideas. One word of caution. I learned this the hard way a few weeks ago. I accidentally knocked my Les Paul guitar off its stand and seriously cracked the neck. Because I needed the adhesive to flow all the way into the cracks, I decided to use super glue because of its water-link consistency. I used a 3ml hypodermic syringe with 18 gauge needle which I filled with the super glue so that I could inject the glue deeply into the crack. I intentionally used a lot of glue hoping it would ooze out. I immediately attached the clamps to hold the neck back together tightly with the intention of wiping off the excess glue. At that very moment, I discovered how noxious the fumes are when using that much superglue. I couldn't breathe around it and it immediately left my eyes burning severely. Consequently, I wasn't able to rub off the excess glue which meant I had a lot of unnecessary sanding to do once everything set up. The next time I work with that much super glue, I'll wear a respirator and eye protection.
A little fan beside your work area blows the fumes away nicely.
Use glasses when handling glue . Don't inhale .
Fan blows the soda n graphite😊
@@dimik3855 Great idea. Thanks.
Hello! thanks for your comment. Wish you all the best!
ممتاز انا اتعلم منك بعض الاشياء الهامه شكرن على مجهودك الرائع
Glad you like them!
I did know about baking soda but nothing about graphite! Many thanks from Rome Italy!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Se ve interesante tu idea trataré de ponerla en práctica y después daré mi opinión, gracias.
yo he probado el bicarbonato y funciona. el que no he probado es con el lápiz pero lo haré.
I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share
I'm Bruce from Church Creek, Maryland, USA
'This' - was marvelous to watch. Super-thanks.
Saludos desde España. Alucinante tus reparaciones e ideas.
Thank you! Cheers!
Perfeito, já conhecia a cola de plástico com acetona mas a grafite com supercola e bicarbonato foi novidade, a reconstrução da engrenagem foi incrivel.
Thank you for your comment. Wish you have a nice day!
تشکر از زحمات شما از ایران هستم
貴方は天才です😊
このギヤの型取り方法は、とても参考になりました❤
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
thank you for your videos, love them. The technique used for the gear was genius & Clever (Brasil)
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Excellent video, Very interesting, Interesting too the warnigs of the dangers to inhale the superglue vapors.
Thank you for noticing! Safety is always our priority when sharing these ideas. Glad you found the video useful!
Man, as a longtime superglue/cyanoacrylate enthusiast I have to say these clever ways of making repairs rock!
A refreshing change from all the clickbait and useless crap on YT.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
That fixing of the gear is brilliant ,thank you!
Glad to help
@@creationholic101
1) Can u please confirm the ratio of how much graphite powder & baking soda you used in your video?
Is it same amount for each (1 to 1 ratio)? Or more of one than the other?
2) what was that u used to apply the glue into the gear teeth filler space? Is that a special syringe/ applicator tip..where to get?
3) what is the purpose to drill the holes through the gear? (Wondering what is the objective for doing that..if needed or can skip this step etc).
Thank you for a really amazing video !!!
Thank you for giving these new tips.
You’re welcome! I’m glad you found the tips helpful. 😊
Exelente! saludos de argentina
¡Gracias! Saludos a Argentina!
I am from Saudi Arabia and I am honored to follow you because your videos are very, very useful
سلام برادرم . من از ایران هستم . چرا به فکر مردم مظلوم غزه نیستید ؟ چرا اجازه میدهید رژیم قاصب صهیونیستی زن و بچه های بی گناه مسلمان را میکشد؟
That is brilliant. Will try it on a dough mixer. From Cyprus
Glad you like them!
A superb demonstration from you. What is the difference from using baking soda, verses baking soda with the graphite power and super glue? Thank you.
it's sturdier
Thanks for your answer.@@creationholic101
От България гледам...😊♥️
danke für die guten ideen aus Rumänien
Estoy iendo el vídeo por segunda vez, son muy buenos se aprende mucho de ellos desde Margarita Venezuela
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Senin gibi yaratıcı insanları severim.harikasın Türkiye den
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Nice one, that super glue is great once you add those ingredients to it. Thank you for those tips.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Felicitaciones desde Colombia
¡Muchas gracias! Saludos desde aquí también!
Thank you from Poland
تعمیر چرخ دنده خوب بود 👏👏👍👍
felicitation de France
Veo tu vídeo desde España, probaré tu idea. Gracias. Me suscribo.
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Hola amigo de cartagena colombia gracias por esa brillante idea hermano
¡Gracias a ti por ver! Me alegra que te haya servido! 🤝
👍 super idée, bonjour de FRANCE 👋
Perfect, hello from Türkiye
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Thank you for your exposition. Very creative. Keep it up.
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Ben Türkiye'den yazıyorum. Gerçekten süpersin. Seni tebrik ederim. Çalışmalarında başarılar dilerim. E.GUNES
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
Than you from Hungary
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
👌👏👏👏👏👏 Realmente útil e inteligente GRACIAS Desde España
This kinda inspired me to reinforce some plastic things i have to prevent breaking.
111111¹
Good ideas.Thank you
So nice of you
احترامي و تحياتي من المغرب 🇲🇦❤
대단한.수리기술.👍🎉
Une excellente idée de bricolage. Merci de l'avoir partagé.
Hello! I am very happy to read your comment. Have a good day!
Kind regards from The Netherlands, Europe !
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Excellent work and would have saved me a lot of trouble if I had known
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
I really like your project! Congratulations
Thank you so much! I'm thrilled you liked the project.
Excellent ideas and well presented. Thanks from Miami, Florida.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Ottime idee... Leon vedo l'ora che di rompa qualcosa per aggiustarla... 😎.. Ciao 🖐️
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Saludos desde el sur de Colombia
¡Saludos desde aquí! Gracias por ver el video y compartir tus saludos.
Desde León España , lo había probado con cianocrilato y bicarbonato
Muy clarito , desde España un abrazo
¡Muchas gracias! Me alegra que te haya quedado claro. ¡Un abrazo desde aquí también!
Great job ❤
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Thanks alot. beacuse teach me about this important team.
Welcome to Creation Holic channel! Thank you so much for your support
A new subscriber, I am from Iraq, Baghdad
Welcome to Creation Holic channel! have a nice day!
Not surprised, thanks for the heads up!
Thanks so much for watching our video. Wish you all the best
Creative and precise. A pleasure to watch. Thanks
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Kỹ thuật hay và hữu ích. Thanks
Welcome to Creation Holic channel! Thank you so much for your support
Increíble. Tomo nota.
Soy de Granada, España
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
High professionalism at work. And a very cool idea😊
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Excelente q nuem trabajo con el carbon de la pila ,gracias desde lima peru
Amazing. Cool to get the graphite/graphene from the pencil
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Exllent ideas
Thank you! Cheers!
From Myanmar Thanks blllions
Thank you
😍😍😍😘😘😘💕💕💕
Desde costa rica
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
You saved the best for the last! Your improvised gear repair is brilliant! If you really want superior strength, use graphene powder. As others have mentioned, cyanoacrylate fumes can be noxious (the first time) but actually deadly on repeat exposure due to sensitization.
Hello! thanks for your comment. Wish you all the best!
SUPER , MERCI
Welcome to Creation Holic channel! Thank you so much for your support
Essa ideia da engrenagem foi demais!...
Obrigado!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Que imaginación!!! Soy de Zaragoza, España
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Mind-blowing impossible ideas, a great help to every house holds, thanks a lot bro.
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Merci ❤
Thank you! Cheers!
玄関のサッシが外れたので、この動画を見て修復できました。この考え方は凄い。
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
سلام ودرود...ممنون عالی بود
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Excellent Bravo 👍👏.
Welcome to Creation Holic channel! Thank you so much for your support
From _Belo Horizonte/BraSil_
Very good ideas!!!
Congrarulations!!!
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
wonderful ideas , however what is cyanoacrylate please explain its composition and strength , thanks and God Bless you for Shearing your wisdom and knowledge .
Super glue
very beautiful wonderful impressive
Thank you so much! I’m glad you found the video impressive. 😊
Amazing technique, Very nice thanks for this great idea
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
I use baking soda and graphite powder, generally depending on the color I need. Never have used them together. What does mixing the 2 together do for the finished product?
Mixing baking soda and graphite powder can enhance the texture and color of the adhesive. It can also improve adhesion in some applications!
These glues could be used to make all kinds of theatrical masks Halloween, party hats, , could be very creative for many things not just repairs.
Υπέροχο ευχαριστούμε πολύ
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
This idea to use graphite with baking soda will be great. I'm in drag racing rc, and you need to stiff the arm to make less flexible. This idea will help a lot and don't need to spend to much metal with I can make the arm more durable and stronger for fraction of the cost
Glad you like them!
Awesome. I learned tips from your sharing.❤❤
Awesome! Thank you!
muy bien gracias! pude arreglar los lentes de mi madre.
Saludos desde Quito - Ecuador!
Glad it helped!
Amazing idea, I deed not see that coming.
素晴らしい知恵です😮
Cómo ago para rellenar cuando los dientes estén desgastados gracias
I will research and send it to you when there is a good solution
Türkiyeden selamlar
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Thật là thông minh ! Rất tuyệt vời !
Thank you! Cheers!
Very clever!
Thank you! Cheers!
انت رائع،،، انا من العراق
Welcome to Creation Holic channel! Hope you have a good time while watching the video
from Turkey. and cool video!
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Hiệu quả và chắc chắn với cách làm của anh. Tôi ở Việt Nam rất thích anh chia sẻ ❤
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Cảm ơn anh
Hola, me comunico desde Argentina, voy a provar la formula, me parece muy interesante, pero desde ya te digo, en nuestro Paìs, el pegamento que utilizas para el arreglo en Argentina ES SUPER CARO, un frasquito de ese tamaño, puede valer hasta 10.000 pesos, lo que utiliza una familia para comer en un día, muchas veces el preferible, comprar un nuevo elemento para reemplazar el roto y no tener que comprar el "LOSTITE" que es la marca comercial de ese super pegamento. Saludos y muy buenas tus propuestas.
Absolutely! Staying organized not only saves time but also makes the entire process more enjoyable. Thanks for sharing your thoughts!
De Argentina, voy a probarlo
Good boi 👍💯🙌
Hello. Thanks for your positive feedback. Wish you all the best
Absolutely amazing thank You
😅😅😅😅😅
Thank you too!
You the best
Nice ❤❤❤
Hi👋 Good idea 💡
I'm Ali from Lebanon
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Walter - Florianopolis - Santa Catarina. Muito bom esses experimentos.
Hello! I am very happy to read your comment. Have a good day!
It's verygood👍