Power Pole Meter & Box Install - Arched Cabin Build
HTML-код
- Опубликовано: 10 сен 2024
- After we do this we just have to install the water line, and then it's time to put the beams up, and start getting it all ready to frame the house!
#archedcabin #powerdrop #powerinstall #archedcabins #20x32archedcabin
Buy soap & lotion from our website or view our blog posts.
All products are hand crafted by Ali. lazyaholeranch...
Become a Patron! - / lazyaholeranch
Visit us on FB and Instagram @lazyaholeranch @lazyaholepets @lazyaholesoap
Hi everyone. Just a quick PSA. If you've come to the comment section to complain about us taking 3 years to get to this point. My kid died right after we bought this place , and it's taken this long for me to really find my feet again, so if you're going to pass judgement, know the whole story folks. This is a household that is grieving the loss of 3 close family members in 4 years. The other two were siblings. I'm also partially disabled and can only do so much stuff at once without ending up in a bad way. So think before you comment, people.
There's a cost breakdown of this part of the project on our blog post. www.lazyaholeranch.com/ep-121-power-meter-breaker-box-installation/
I'm so very sorry for your loss. God bless you.
Sorry for your loss and sorry people were being so hateful to y'all. Hope all is well in your and your family's lives these days
You need to use that special aluminum electrical wire grease on those main lines where you stripped them and put them under the lugs on the top side of the meter. You will probably fail inspection if you don't. The aluminum wire starts to oxidize with in minutes of being stripped and you really are supposed to do it right away, but if you just loosen the lugs, pack the grease in and tighten them back down no one will know the difference. It's only a few bucks for a small tube of it at the hardware.
Thank you! I was calling this in today so they’ll be out tomorrow. I’ll have Mike take care of that today ❤️❤️
@@LazyAHoleRanch yep, was just going to mention putting some OxGuard on them wires!
@@Hangs4Fun I scrolled down right away when I saw. Good catch.
For more info including material cost breakdowns, visit our blog! You can also buy handmade soap from our website. www.lazyaholeranch.com/ep-121-power-meter-breaker-box-installation/
I like the bracket you made. very nice.
Thank you!
Nice video thanks for taking the time to show us how this big job , great job 👍
Wow great job!!
I need to do one in NC
You should!
If you do I would love to see how you do it, I live in NC and have had no luck finding help to do mine
6:10 Junk in the trunk
Hi was wondering what type of wire you used in you metal conduit riser ? Is it Urd ? SE?
URD
Where did you get the brackets to mount the box to the pole? Or are they homemade? 👍🏼
Mike bought some flat stock and used the welder to fabricobble something together.
How far is your pole from the utilities company pole , ? Just curious because I'm installing mine & its basically like yours..mine is 130 ft between the 2 poles & I'm wondering if theyll make me add another pole.
I just did a rough measurement and we are about 50-55’ from the pole. I have no idea what the maximum is, so I’d suggest calling the power company and asking them what is involved for your particular location. Best of luck to you!! ❤️❤️
@@LazyAHoleRanch k thanks
Smoking is hard to stop,