RCF SUB 9004-AS Cleaning and Maintenance

Поделиться
HTML-код
  • Опубликовано: 28 окт 2024

Комментарии • 41

  • @beornthebear.8220
    @beornthebear.8220 2 года назад +1

    77 Spray is serious business. I used to word in art supply, and this was a killer adhesive.

  • @kevonmanuel
    @kevonmanuel 2 года назад +11

    On eBay - Brand new RCF SUB 9004 - Never used. Direct from the factory. 😂😂😂

    • @ЧелоВек-к3к
      @ЧелоВек-к3к 2 года назад

      По русски слышится ебэй как наебалово 🤣🤣🤣

  • @markkamau6888
    @markkamau6888 Год назад

    My kinda guy. Nice work

  • @commanderstyle-
    @commanderstyle- 2 месяца назад

    hi :) Are the 9004 and TT2 subwoofers significantly better than the 8004? Do you have any findings or tests? The neodymium 18n408 should be installed in the 9004 and TT. Do you hear it or is the money just for the LAN interface?

  • @danielenocera
    @danielenocera Год назад

    Great Video, what's the thickness grill foam that you used?

  • @TylerMarletteNY
    @TylerMarletteNY Год назад

    Will 2 9004’s give me the same performance as a single 9006? same drivers?

  • @markhattendorf9031
    @markhattendorf9031 2 года назад +1

    What paint was that? I usually use a black sharpie on small scratches, but i do have gouges on some of my subs.

    • @IQrental
      @IQrental  2 года назад

      It's Warnex Black

  • @audioquest1
    @audioquest1 2 года назад +1

    Very nice.
    Is the Spray not sticky once it's Dry.
    Reason I asked. The spray goes inbetween the grill holes. And the Dust get stuck in it

    • @IQrental
      @IQrental  2 года назад

      Good question. I will check it. Main trick - grill suspension and accuratly spraing 30cm distance. It protects from glue in holes

    • @pajtimdj
      @pajtimdj 2 года назад

      @@IQrental once I did it with a different spray adhesive the glue went behind the grill holes and it took hours to clean the grill. Maybe the 3M 77 is a better product

    • @IQrental
      @IQrental  2 года назад +1

      @@pajtimdj i had bad experience twice) 3m is the best righ now. You can see result in my video. One question now - how long will it last)

    • @pajtimdj
      @pajtimdj 2 года назад

      @@IQrental yes,the 3M 77 spray adhesive glue is the best. Once I asked FBT what they were using at their factory to stick the cloth on speakers and subwoofers grills they told they used 3M 77. Here in Albania I still haven't found this type of adhesive,I tried another product,Wurth if I'm not wrong and it was sprayed so bad on the subwoofer grill. This time I'm going to use 3M 77 only

    • @IQrental
      @IQrental  2 года назад

      @@pajtimdj amazon, ebay?

  • @TylerMarletteNY
    @TylerMarletteNY Год назад

    i have 3 8006-as and I hate them, anything below 40hz is useless. kills me because the srx828sp’s I have do a 30hz sine wave at about the same volume as the entire range. how is 30hz on the 9006/9004?

    • @djs1279
      @djs1279 3 месяца назад

      Because 80% of this days music market its no sense under 40hz. When you have a sub that sounds good at 30hz (-3db or higher ) ... it will not perform good in the upper freq. This is a problem for most "Plug n play sound systems" . So, RCF made this subs to be much better compatible with a much more Tops than Subs with 30hz response ;) .

  • @laclass5658
    @laclass5658 2 года назад +1

    Uff 😍

  • @cdel3631
    @cdel3631 2 года назад

    does anyone know if the Warnex paint would work for the EV EKX series ??

  • @Madong-J2
    @Madong-J2 2 года назад

    Good

  • @rocksolidentertainment6060
    @rocksolidentertainment6060 2 года назад

    Try the foam armor all spray. Its less work, but does it better

  • @pontianaksenibudaya2986
    @pontianaksenibudaya2986 2 года назад

    TheBest

  • @АнтонШматов-ш4с
    @АнтонШматов-ш4с 2 года назад

    А что не разобрсли колонку полностью

    • @IQrental
      @IQrental  2 года назад +1

      Да как-то задачи не было) а что там интересного?)

    • @АнтонШматов-ш4с
      @АнтонШматов-ш4с 2 года назад

      @@IQrental какие дины там стоят как корпус внутри собран есть ли ребра жесткости, как выполнена полка фазоинвертора :)

    • @IQrental
      @IQrental  2 года назад +1

      @@АнтонШматов-ш4с
      Динамик RCF LF18N405
      NOMINAL DIAMETER:
      18 inch / 457 mm
      RATED IMPEDANCE:
      8 ohm
      PROGRAM POWER:
      3000 W
      POWER HANDLING CAPACITY:
      1500 W
      SENSITIVITY:
      97.0 dB
      FREQUENCY RANGE:
      30 - 1000 Hz
      EFFECTIVE PISTON DIAMETER:
      395 mm / 15.55 inch
      MAX. EXCURSION BEFORE DAMAGE:
      58 mm / 2.28 inch
      MINIMIM IMPEDANCE:
      6.0 ohm
      VOICE COIL DIAMETER:
      4.0 inch / 102 mm
      VOICE COIL WINDING MATERIAL:
      Copper
      VOICE COIL LENGTH:
      36 mm / 1.42 inch
      NUMBER OF LAYERS:
      2
      KIND OF LAYERS:
      inside/outside
      TOP PLATE THICKNESS:
      15 mm / 0.59 inch
      CONE DESIGN:
      Curved
      SURROUND MATERIAL:
      Polycotton
      SURROUND DESIGN:
      Triple roll
      MAGNETS:
      Neodymium
      HYPERVENTED MAGNETIC STRUCTURE:
      Yes
      SPIDER:
      Single

    • @АнтонШматов-ш4с
      @АнтонШматов-ш4с 2 года назад

      @@IQrental ух круто спасибо большое я подумал вы сейчас их разберете :) (шучу просто сам корпуса одно время изготавливал и мне всегда было интеремно что и как там реализовано)

  • @andradaffa3640
    @andradaffa3640 2 года назад

    Speaker rcf tipe apa?

    • @IQrental
      @IQrental  2 года назад

      What do you mean? Model of speaker?

    • @andradaffa3640
      @andradaffa3640 2 года назад

      @@IQrental type speaker

    • @IQrental
      @IQrental  2 года назад

      @@andradaffa3640 This is RCF LF18N405
      NOMINAL DIAMETER:
      18 inch / 457 mm
      RATED IMPEDANCE:
      8 ohm
      PROGRAM POWER:
      3000 W
      POWER HANDLING CAPACITY:
      1500 W
      SENSITIVITY:
      97.0 dB
      FREQUENCY RANGE:
      30 - 1000 Hz
      EFFECTIVE PISTON DIAMETER:
      395 mm / 15.55 inch
      MAX. EXCURSION BEFORE DAMAGE:
      58 mm / 2.28 inch
      MINIMIM IMPEDANCE:
      6.0 ohm
      VOICE COIL DIAMETER:
      4.0 inch / 102 mm
      VOICE COIL WINDING MATERIAL:
      Copper
      VOICE COIL LENGTH:
      36 mm / 1.42 inch
      NUMBER OF LAYERS:
      2
      KIND OF LAYERS:
      inside/outside
      TOP PLATE THICKNESS:
      15 mm / 0.59 inch
      CONE DESIGN:
      Curved
      SURROUND MATERIAL:
      Polycotton
      SURROUND DESIGN:
      Triple roll
      MAGNETS:
      Neodymium
      HYPERVENTED MAGNETIC STRUCTURE:
      Yes
      SPIDER:
      Single

    • @andradaffa3640
      @andradaffa3640 2 года назад +1

      Trimakasih

  • @thuhoang1820
    @thuhoang1820 2 года назад +1

    Mấy ông vn quảng cáo mới 99,9 % là đây

  • @wardiyono1590
    @wardiyono1590 2 года назад +1

    Konten bisu ??