This video is titled incorrectly….for five years. This is the 040 automatic cutter. The 044 is the semi which holds the key up to cuter but you push the key through with a lever system. Currently 1375 usd for full auto model 040. I went with the 44 semi with the lever and spring for 1250 usd. Much more control then just a push bar.
MISLEADING... 044 does not have Auto switch to move the console on its own - Title of this video is 044 Where as the video is of 040 !!! I purchased the wrong model
You should actually trace the key back and forth a few times to be sure you cut it properly. It's good to know how to properly cut a key if you are going to make a video of how to do it. I was just looking at the key machine to see about buying a new machine.
This video is titled incorrectly….for five years. This is the 040 automatic cutter. The 044 is the semi which holds the key up to cuter but you push the key through with a lever system. Currently 1375 usd for full auto model 040. I went with the 44 semi with the lever and spring for 1250 usd. Much more control then just a push bar.
If any of you have the Silca 044 or 045. Use a DND key blank for tip stops. There’s zero play. So the keys align perfectly.
The steel stop bar system used for your automotive key adjustment is absurd. Who designed this system?
Thank you
This video just saved my job 😂.
I thought the level operated mechanism will shut off the motor automatically when the carriage is on the down position.
Can it cut Toyota double sided keys?
MISLEADING... 044 does not have Auto switch to move the console on its own - Title of this video is 044 Where as the video is of 040 !!! I purchased the wrong model
Is the key blank iron or brass?
Maravillosa maquina soy de Ecuador, donde puedo acquiri una
Can I have the artikel number from the steel tool and te art number for the kaliber tool? Grts.
Whats the price this machine?
Hi, Which type of key use A,B,C & D
You should actually trace the key back and forth a few times to be sure you cut it properly. It's good to know how to properly cut a key if you are going to make a video of how to do it. I was just looking at the key machine to see about buying a new machine.
How much?
hello may I know if you can use acetate to trace your key?
Quau valor dessa máquina, por favor
Plzz tell me price
What price
How much cost