Great video chuy your videos are top notch and on point I am learning a lot keep the videos coming I will be a certified diesel technician soon thanks to your videos God bless
Thanks man i just did that on my trailer 1st i cleaned the area with a blast of brake fluid then i tapped the sensor gently a few times then I unplugged the trailer electrical cable turned on the ignition waited for a few seconds turn the ignition back off to reset the ABS system and when I turn the key is back on the light was still on but I drove it backwards and forward few times and my light went out what do you know hooray everything is working perfect.. you did a great job showing where the sensor actually meets the wheel because at first I didn't even know where the sensor is
Wheel speed sensors are 25 bucks just replace them if in doubt the clips that hold the sensor in place should be much tighter than what your sensor was… I just replaced 2 of them and even with the grease they provide it requires a 3/8th socket extension and hammer and a gentle tapping to get mine to seat against the ring Basically it’s very snug.
This is my prob right now. I went to shop and then drove 5miles and the abs went back. They change the cable and push the sensor but it's still not fix. Abs still on my truck.
My trailer front driverside spindal breaks are locking up only and @ braking it makes a huming loud noise . What do u think that could be. No anti lock braking light indicator is on either.
Oye cuando son frenos de discos, y chocamos todo, cables computadora o (modulo) sensores , separación ÷sensores y rotor, y aun sigue prendida la luz , alguna sugerencia. ? Gracias siempre veo tus videos. Gracias
Amigazo tengo un problema con mi Utility trailer , lo qué pasa es cuando freno pareciera que un eje o ambos comienzan a saltar o frenar de poco . Ya cambien amortiguadores y pasa lo mismo . Sabe que podría ser?
Do you know how many headaches and how much money you just saved all these truckers!? This video is a blessing. Thank you very much.
Thank you so much for your kind words! Subscribe more to come
@@iiLoveeAnahii can I come to your shop? I have abs problem:)
Agree
Saved me a headache I completely forgot to check the spacing for that sensor
Chuy amigo mil gracias por compartir me as salvado de ir a un taller.
Great video chuy your videos are top notch and on point I am learning a lot keep the videos coming I will be a certified diesel technician soon thanks to your videos God bless
Thanks man i just did that on my trailer 1st i cleaned the area with a blast of brake fluid then i tapped the sensor gently a few times then I unplugged the trailer electrical cable turned on the ignition waited for a few seconds turn the ignition back off to reset the ABS system and when I turn the key is back on the light was still on but I drove it backwards and forward few times and my light went out what do you know hooray everything is working perfect.. you did a great job showing where the sensor actually meets the wheel because at first I didn't even know where the sensor is
thanks anh nhiều lắm,ABS là hệ thống này việt nam ít thấy ở mooc lắm.
Buena faena maestro...👨🔧👌👍🖐
Spectacular! Thank you!
Great video sir! Thank you!
God bless you my brother thanks for your videos
Thank u. Great video and detailed explanaition. God bless.
THANK YOU VERY MUCH ALPHA FOR YOUR COMMENT GOD BLESS YOU TOO 👍👍👍
Good video
Good tips. Thanks
The gab between the sensor and the teeth goes wide because of tight turns or 90 degrees parking
Gap*
Wheel speed sensors are 25 bucks just replace them if in doubt the clips that hold the sensor in place should be much tighter than what your sensor was… I just replaced 2 of them and even with the grease they provide it requires a 3/8th socket extension and hammer and a gentle tapping to get mine to seat against the ring Basically it’s very snug.
This is my prob right now. I went to shop and then drove 5miles and the abs went back. They change the cable and push the sensor but it's still not fix. Abs still on my truck.
Thank you Chuy 👍🏻
Good job. Keep it up with good videos like this
Thank you very much Jdr APPRECIATE 👍👍👍
You’re alright with me‼️
I have an abs not working, I change the ECU unit but no changes, which problem do you think it is?
My trailer front driverside spindal breaks are locking up only and @ braking it makes a huming loud noise . What do u think that could be. No anti lock braking light indicator is on either.
Oye cuando son frenos de discos, y chocamos todo, cables computadora o (modulo) sensores , separación ÷sensores y rotor, y aun sigue prendida la luz , alguna sugerencia. ?
Gracias siempre veo tus videos. Gracias
Good information thanks
THANK YOU VERY MUCH FOR YOUR COMMENT AND THANK YOU SUPPORT IMAD👍👍👍
I wonder if the censor clip is bad and just keep backing off
Chuy where are located ?
the abs light on the trailer comes on when I step on the brakes, but it doesn’t turn off, it stays on. What can I do to fix this issue?
Amigazo tengo un problema con mi Utility trailer , lo qué pasa es cuando freno pareciera que un eje o ambos comienzan a saltar o frenar de poco . Ya cambien amortiguadores y pasa lo mismo . Sabe que podría ser?
My light flashes 4 times 3 different cycles. Can find code. Any thought?
Mi traila parparea 4 veces en 3 ciclos. Que prodria ser?
Sensor ye1 it's the same thing as what he is showing.
Video for beginners post a video all the sensor ok then find the problem
Thank you brother 👍
THANK YOU 👍👍👍👍🤝🤝🤝🤝
Thank you for your time amigo 👍
THANK YOU DANIEL FOR YOUR COMMENT GOD BLESS YOU 👍👍