Richard Harrington Did you remove it? I can tell you that the center console and every panel must come off before removing the main dash. I got a little bolt in my vent when I accidentally pushed it into the vent by the windshield
I have a 2000 Corolla but the gauge cluster won't come out, I have all screws out but it's like the wiring doesn't have enough slack, and I can't turn it sideways like you did. Any ideas how I could overcome this problem?
Just in case this happens to someone else. My speedometer was stuck at zero. I realized that when I started the engine, the gauge move from below 0 to 0, but never further than that. Believe it or not, when I disassembled and removed the clear plastic cover, I discovered that the gauge needle was blocked by the pin that avoids it to go below zero: somewhat it was on the other side of the pin. I forced it to the right place, and speedo working again. So this could also happen with the tachometer.
Hey Peter, I'm an avid watcher of all your videos. Since you're a Toyota expert, I have a question for you. my wife's car is a 2005 corolla, with 206,000 km on it. North American model (Canada). recently when the car is driven, the whole dashboard rattles and buzzes like you feel a headache after 10 mins of driving! any suggestions, other than removing all coins and emptying out the glove compartment, as we did that already and didn't work! thanks in advance.
Nope, didn't try yet. I researched that taking the dashboard out is a 4 hr job ,then I would fiddle with it for no less than 2 hrs to tighten all screws and bolts, and putting it back in is another 4 hr job. in total I figured it would be a 10 hr job! the heart is willing but the flesh is too weak!
Hi peter. Can I ask, my corolla doesnt have a tachometer, i want to buy a instrument panel from another corolla that has a tachometer. How will i be able to fo that? Thanks
no it is not possible because the connectors though look the same are electrically different also you cars ECU doesn't have the wire needed to provide the tach with the signal it needs
i remove my cluster, then when i put it back on transmission would not shift i had to star the car then connect the cluster then transmission shift fine ?
I have a question, my speed can slowly goes up or down if i hit the gas pedal or break but it will never show the right speed and the trip mileage makes all the numbers change at the same time is there any way to fix that or I need to change the whole dashboard, please let me know thank you!!
@@PeterFinnTheCarDoctor it passed :D had a sticking tire, brake pad was jamming so filed it down to fit better and she flew by :) your channel has saved my ass a good few times!
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
I cannot describe how helpful your videos were for my DIY Corolla maintenance, thank you very much for your work!
Great comment and Thanks 👍😃
this guy deserves an award...i admire u for doing this man...
Thanks, Sir!
maybe should have named this video replacing instrument cluster lights
Ok
@@PeterFinnTheCarDoctor looool😂😂 hes just like ok
not impressed, you said "replace dashboard" that is not the dashboard friend , that is the dashboard DISPLAY unit !!!
Good point 👍
Mechanic wanted to charge 400 just for the part and labor for it. Thank tot for the diy video 👍
Glad to help
I have a 2007 corolla, the lamps are also the same or are they soldered on the dashboard
Thanks for comment 👍😀
Always great videos but I needed a quick video on removing the dash not just the instrument panel or whatever this is called
Thanks 👍
Another great tutorial Peter Finn. The title should say instrument panel removal...I hope you could do a dashboard removal video. Thanks.
Hi, thanks for info. :-)
It should actually say instrument cluster removal , instrument panel is the dashboard....which I am in need of removing right now not fun
Richard Harrington Did you remove it? I can tell you that the center console and every panel must come off before removing the main dash. I got a little bolt in my vent when I accidentally pushed it into the vent by the windshield
I have a 2000 Corolla but the gauge cluster won't come out, I have all screws out but it's like the wiring doesn't have enough slack, and I can't turn it sideways like you did. Any ideas how I could overcome this problem?
Please use force and man/woman with small thin hand 👍😃
Thank you I needed this today to remove and clean clear plastic from behind because it looked fogy and I done it and it's all looking nice.
Juu kiitoksia videosta en olis itte osannu! 👍
Thanks for comment 👍
Hello Peter, my dashboard shows false speed information.How can I fix? Thank you for helping me
Install new dash meter and speed sensor
Hi Peter, what is the proper PART name for the clear plastic cover on the e11 dashboard?
Dash
Just in case this happens to someone else. My speedometer was stuck at zero. I realized that when I started the engine, the gauge move from below 0 to 0, but never further than that. Believe it or not, when I disassembled and removed the clear plastic cover, I discovered that the gauge needle was blocked by the pin that avoids it to go below zero: somewhat it was on the other side of the pin. I forced it to the right place, and speedo working again. So this could also happen with the tachometer.
Good comment. If you want more help from me, then become a member of my channel. 😀👍
hey peter finn my 2002 corolla seatbelt light wont stop flashing seat belt still works though, do i need to replace?
Hi, replace sensor in your car seat.
Hi peter finn do you know what kind of bulps i should orderif i want to replace them?
Hi, Please visit here: ruclips.net/video/P0Jn9Qw17HM/видео.html
Hey Peter, I'm an avid watcher of all your videos. Since you're a Toyota expert, I have a question for you. my wife's car is a 2005 corolla, with 206,000 km on it. North American model (Canada). recently when the car is driven, the whole dashboard rattles and buzzes like you feel a headache after 10 mins of driving! any suggestions, other than removing all coins and emptying out the glove compartment, as we did that already and didn't work! thanks in advance.
Hello, I know this issue. We should to be check all screws and bolts in dash. A big job...
Quality Reno ¿where you able to fix it?
Peter Finn please do a video showing how to fix this...
Nope, didn't try yet. I researched that taking the dashboard out is a 4 hr job ,then I would fiddle with it for no less than 2 hrs to tighten all screws and bolts, and putting it back in is another 4 hr job. in total I figured it would be a 10 hr job! the heart is willing but the flesh is too weak!
Peter is it the same for ae 82
Yes
Is there a video how to remove the whole dashboard? Not just the gauge assembly?
Noted 👍
Hi peter. Can I ask, my corolla doesnt have a tachometer, i want to buy a instrument panel from another corolla that has a tachometer. How will i be able to fo that? Thanks
Ok, interesting thing. I have to investigate.
no it is not possible because the connectors though look the same are electrically different also you cars ECU doesn't have the wire needed to provide the tach with the signal it needs
i remove my cluster, then when i put it back on transmission would not shift
i had to star the car then connect the cluster then transmission shift fine ?
Hi, what car you have?
corolla 1994
Ok, interesting error. Do you have this error now?
had to use sand paper on the vss and cluster connectors
like a miracle no more shifting issues
Thanx so much for your videos!
It's really helpful for me!
I have a question, my speed can slowly goes up or down if i hit the gas pedal or break but it will never show the right speed and the trip mileage makes all the numbers change at the same time is there any way to fix that or I need to change the whole dashboard, please let me know thank you!!
Engine is worn out
Excelente video
Noted 👍😊
Great video but it shows instrument cluster and NOT dash removal.
Noted 👍
my emergency brake light doesn't turn off what to I need to do to fix that?
Hi, please replace the switch.
maybe u didn't have enough brake pads, or you recently changed them ( drums maybe)
good information sir
Thanks. :-)
The title should be "How to remove Instrument Cluster or Panel Gauge" not Dashboard. Dashboard is on the top of Instrument Cluster.
Thanks 👍
Thank You !...
Thank You. 👍
I have ABS fault on my 1999 corolla im gonna remove the panel take out the light so it passes the MOT test HAHA
Good luck!
@@PeterFinnTheCarDoctor it passed :D had a sticking tire, brake pad was jamming so filed it down to fit better and she flew by :) your channel has saved my ass a good few times!
it does not work for th 2005 toyota corolla, compltely different my friend, no help at all.
Hello, I need to do new video.
Im having the same problem for my 2005 corolla and this video doesnt do it
My rpm no work how can I fixed
My rpm no work is Toyota Corolla 2000
That's not a dashboard... That's an instrument cluster
Thanks. 👍😃
nice job!
Great! And many Thanks for comment. :-)
in here!!
Hi, Thanks for comment. :-)
Instrument cluster not dashboard, change the title.
Ok and Thanks. :-)
Hi
👍 HI