Building a stand for my reloading press
HTML-код
- Опубликовано: 2 окт 2024
- I built a stand for my reloading press out of plywood
Measure In Grains channel: / thebetterfoodreviewr
ThecrazyScotsman channel: / @thecrazyscotsman
**Music**
intro: Motley Crue - Dr. Feelgood
Ben Sound - Extreme Action - royalty free music
outro: Crazy Lixx - Rock and a hard place
#2ASTRONG #USA #reloading
Many have asked for dimensions for this stand
The entire stand was made of 3/4" plywood, but you can use any type of lumber you wish
Base: 10" X 18"
Top: 10" X 8" two layers thick
Sides: 5-1/2" tall, the top edge is 8", the bottom edge is 9". There will be a slight angle to the front edge
The center support is 4" X 8"
3D printed primer funnel: www.ebay.com/itm/Lee-breach-lock-reloader-primer-catcher-3d-printed-/252908837868
Awesome Job Brother that will work nicely! lightweight and portable
Portability is what I was going for. Thanks brother
Good job! Well built!
Thank you
That real Nice ,,great job 👍👍🇺🇸🤓
Thank you
Nice!
Thanks you
Nicely done. You motivated me to do the same for my reloaded. I am short on space and your example would great for me. Thanks for posting your build
You're welcome, good luck with the build
All that for a 15.00 press!
Well, now they are 70-80. I bought it 3 yard ago for depriving for 15.00
It works well for me
Hey I have to ask what this fit a Orwell rather would it handle a breech lock Challenger press? I'm in need of a reloading press bench and I'm that broke I can't even look at something lol I have a bit of lumber and hand tools
It should work, you would need to design it around that type of press
Wow bro looks nice, have you been reloading at all?
Thanks, I'm still using it. Yeah I'm reloading, still only reloading 9MM. I want to get some dies for 357 magnum and eventually 40 & 45
Won't be long before you are self sufficient have fun
I hope so, I picked up a caliper today and need to get a set of dies and a way to prime...home stretch
Great equipment you have in your shop to do a great build. Well done.
Thanks Brian, I love working with wood but haven't had much of an opportunity for a while. Been busy plus the broken arm thing
I have that press, Dedicated to Pulling bullets have a RCBS Collet Puller die with Several different Caliber Mandrels. I reload with a Lee Classic Turret Press
You design and execution of the stand is outstanding. Nice
Thank you sir
Speedy Gonzalas
I try =)
Very nice Big J
Thank you brother
Very good build ;}
Thank you
Very nice....
Thank you Bobby
Very cool Bro. I like your sho p, I'm envious. Also like the wind chimes I could hear, very peaceful. What movie do you get those segments from at the end of your vids...?
My shop needs some organization, but thank you. I get the footage from google images and piece it together . Happy Easter my friend
How do you remove the primer catcherto empty it.
The container pulls out
@@gunnwild1 Didn't look like there was room to get past the ram.
nice....
Thanks Richard
Cool man.
Thanks
That was awesome brother, you have an excellent shop!! Did you get that design online, or did you just come up with it on your own? You do very nice work my friend, glad to see you are well on your way. Let me know if there is anything else you need, I may have extras just sitting around. Have a safe and blessed weekend brother!!
Thanks Rich, it was my own design, then I saw the video popsquest did and I borrowed a little from his design. I picked up a caliper today, so the only things I need to get is a way to prime the cases, a 9MM die set, and an ammo checker. All are on my wish list on Amazon, right now I'm saving money for my vacation and I will pick up those items when I get back providing I still have money LOL
I used to own that same press about a decade ago the Lee anniversary Edition press kit! I had that for a long time then I bought a RCBS Master Reloading kit. I also own the horn Adt lock n load press kit as well. I actually designed a portable press bench I used a pretty sturdy wooden stool and designed a kind of weight rig for the bottom of it that I used 2 15 pound dumbbells that I hooked up to the bottom of the stool to help anchor it in place I then made a wooden piece for the top of the stool that was a little wider and square for the top I then fit the RCBS accessory plate to the top of that wooden piece where It made it a lot easier to take off and hook back up to my work bench so whenever I wanted to reload inside or do it while I’m in front of the tv or whatever I could just move the press to the portable press stand and back and forth as I saw fit it works really awesome.
Sounds like you have a great set up that suits your needs
Looks solid. Doesn’t look like the spent primer tray is readily accessible.
Thank you, I can barely get the tray in and out when the handle is positioned in the right spot, but it is removable
Man. You’re fast 😂 Makes me want to go build something. Well done Big Jeff.
Ain't nuttin but a thang LOL Thanks Scott
AND Your Off to the Reloading Hobby.
Almost there, I still need dies and a way to prime the cases
Huh.... I totally missed this one. Excellent stand.
RUclips and their funny business =))
Excellent job! Do you have the measurements of your design? Do you have a link where the 3D device can be purchased? Thank you, Sir!
The entire thing is made of 3/4" plywood, but you can use whatever type of wood you wish
The base is 18"x10"
The top is 10"x8" two layers thick
The sides are 5-1/2" tall the top edge is 8" long the bottom edge is 9" long so there will be a slight angle
The center support is 8"x4"
The 3D printed primer funnel was given to me by another RUclips channel, but you can find them on ebay: www.ebay.com/itm/Lee-breach-lock-reloader-primer-catcher-3d-printed-/252908837868
@@gunnwild1 You're the best!!!!!!!!! Thank you! I followed your instructions and built it! :) Thanks again!!!
@@stp7629 You're welcome and good luck
Oh yea First!
I purposely scheduled it to be released early so you could be first...no normal human being is up that early =)
Nicely done Sir!
Thank you
You look good covered in man glitter! xoxo
...and you know this man
Craftsmanship! Noice!!!
Thank you
Good stand and it looks sharp....Good stuff....
Thank you Scott
Well done sir!
And the journey continues......
Thank you, I need dies and a way to insert the primer and I can start reloading
Nice setup and portable too .
Thank you
Nice work! That will certainly hold up!
Thank you, it's really solid
Cool project and tune!
Thanks brother
Looking good brother 👍
Thanks Jesse
Nice.. you got skills 👍
Thank you brother
Awesome stuff there
Thank you Phil
Awesome project
Thank you
Great job 👍 .
Thanks Dave
Nice Sir👍
Thank you
excellent job sir.
Thank you
Bombproof build sir
Thank you. I didn't receive an email from you for a channel sticker, did you email me?
@@gunnwild1 no sir I looked in your about section and did not see an email address
I gave it to you in a comment when you asked how you can get one. Here it is again: gunnwild1@gmail.com
Absolutely fantastic. Doing this Monday or Tuesday on my days off
Good luck
@@gunnwild1 didn't get to the project yet but I will within the next week or so. Just acquiring the right tools. Can you give some dimensions by any chance and where can I get the insert for the primer feed?!
@@dimmadimsom All of that information is in the comment pinned at the top
@@gunnwild1 thank you. Did not see that!
One last question. Why the slight angle in the front?! I'm not very well equipped with tools to potentially get that angle... but would it be okay if I didn't cut it at an angle ?! All I have is a circular saw, trying to do this build for the exact set up you have... I have as well...