LMAO... Yup an awesome intro for sure. great how-to video. go to love the anti-tip 'ankle biters.' here is a good laugh 4 ya dan. i got some new sweet pants and hadn't heemed the leg [missing from knee down] wasn't wearing my prothstetic leg... i was driving fwd and the sweet pant leg went under the wheel and pulled my pants right off. lmao.... damn lucky i was at home. anyway... have a good one. thanks again
Always enjoy your videos Dan, and I must be a weirdo too, as I seem to be collecting wheelchairs 😂 you can never have enough wheelchairs lol 😆 but in my case, it's finding somewhere to put them, as I live in a ground floor flat 👍
Thanks for that information!! Because I have a wheelchair just like that one. It was given to me, and I had to modified the seat for an adult and clean up all the dust it build up on it. But I need to find some replacement light because they are not working on the front and back. If you can show me how to replace the light I would appreciate it.
6 месяцев назад
Thanks for all the useful information! Can you point me to any videos to replace the rear caster wheels on the F5 Permobil chairs?
ive got service manuals on the website - brokenwheelchairs.com but if you're JUST replacing the tires, the process is essentially the same as this chair - ruclips.net/video/QyokmPZULjA/видео.htmlfeature=shared&t=153
I have a 2023 pro mobile F3 with squeaking things coming from the frame area. Could you pull up the video again that you showed before with what to do when this problem occurs
I was just wondering if you can fix for a fee of course or can u direct me as to were I can get my permobil joystick repaired. It got damaged in the rain . My carport collapsed that's how it got wet.
Do you think backrest canes can be fitted to an F3 instead of the centre-post type backrest? I know the M1 has sort of a backrest cane frame thing, but would it fit on an F3? Dealer will not do but a friend just cannot use the chair the way it is. Having canes allows us to build a back that works for her.
Question for you Do you know if medicaid will cover a replacement chair before the five year min ? Or dose it have to be at least five years and the chair has to be totally worn out? Mine is about four years old and all the bearings and toast and needs some tlc. It's a jazzy 600es And I want something better. But if I have to wait I guess that's what I will do l.😬
I have a 2021 Perma mobile. I want to put a back up camera on it. They want over $450 for a plug and play one that uses the same connector as the chair does. But I found a back up camera on eBay that doesn't have any connector for about $90 bucks. Do you think I could make the eBay one work, and what type of plug would I need.
you'd also need to mount the screen for it somewhere.. but it can be powered directly from the batteries. the R-net cables on the chair arent for sale anywhere - BUT you can buy short cable son ebay and cut them in half to get 2 connectors!
Hello, I have a f5 standing frame. IM having a issue where it only go 3/4 up and I can't move the chair until I give down The quick positioning buttons flash red Thanks
We just received an F5 for my 8 year old son (growing fast). Do you have any satirical guidance on adjusting the programming for the modified sit to stand motion?
ahhh so that's one of the more complex things to adjust... honestly id get the DME/Dealer to come put and make the changes for ya. ive played with it a bit, but always end up screwing up one of the steps in the process!
Hi, I have another F3 question I'm hoping you can help with: I have an external switch connected to my controller that enables me to change modes. Is there a way that I can turn the lights on using the same switch or another switch? As of right now, if I plug a switch into the hole next to the existing I can only turn the chair off and on using a switch. Thanks !
in theory, its possible to change the programming so the external switch can control the lights, BUT i've never tried setting that up... regardless you'd need a programmer/USB dongle, or a DME / Rep that knows what they're doing :^)
Totally need anti-tippers on my f3. It's my backup wheelchair. But I've tipped forward in it before and if I didn't have strength in my calves to push on my foot plate I woulda fell face forward. 😂 Just gotta take it slow in certain areas.
Hi Dan! I recently received a new F3. I had an EZ lock bracket installed on it. Now, every time I lock into my van, I receive the following message on my chair controller: "PM Gyro Performance Active 9450". Once I release from the lock, and turn my chair off/on, it is fine. Any ideas why this is happening? Thanks
so thats a known issue with PG drives (the maker of R-Net) - they stared using another type of gyro.. and those errors can happen with EZ locks, and also in a moving transit bus or train. a power cycle will fix it.. but if it becomes an issue, permobil told me to have people contact their local rep, and they can swap it out for the older style. for now though, its not a "problem" but just kinda how things are :^/ (apparently PG drives isn't too concerned about fixing the issue)
Hello Dan I have problems with low blood pressure right now I am in a C300 originally it came with a react recline actuator it would break around every 2 weeks it would strip out because of my constant use. So they agree to put on a linak recline actually because it was much stronger and beefier unit. That seem to solve the problem it lasts for a little bit over a year before they have to replace it which was awesome. I just received a new F3 and I noticed on the recline it is very slow speed moving up and down do you know of any way to modify that to move a little bit faster up and down? I am also wondering if that actuator is going to hold up hopefully? Any input would greatly be appreciated!
they wont bolt up without different front swing-arms BUT that's the main difference between the 2 chairs. they are almost identical - just different motors, shocks and a taller seat lift
hello I am looking for a wiring manual for my 2023 Permobil M3 Corpus I want to wire in some lights or conversely if you have a set of led lights you could sell me at a not Outrageous price I would be willing to buy them my wheel chair was puchased for me by the Government because I live on a disability pension which is a joke Please contact me and let me know
LMAO... Yup an awesome intro for sure. great how-to video. go to love the anti-tip 'ankle biters.' here is a good laugh 4 ya dan. i got some new sweet pants and hadn't heemed the leg [missing from knee down] wasn't wearing my prothstetic leg... i was driving fwd and the sweet pant leg went under the wheel and pulled my pants right off. lmao.... damn lucky i was at home. anyway... have a good one. thanks again
Awesome video Dan
Valuable, worthwhile watching videos!
Thanks!
Could you make a video on how to adjust the height of the backrest? no one has ever posted a video on how to adjust the height.
Always enjoy your videos Dan, and I must be a weirdo too, as I seem to be collecting wheelchairs 😂 you can never have enough wheelchairs lol 😆 but in my case, it's finding somewhere to put them, as I live in a ground floor flat 👍
Great tutorial as always. Cheers...
Thanks for that information!!
Because I have a wheelchair just like that one. It was given to me, and I had to modified the seat for an adult and clean up all the dust it build up on it. But I need to find some replacement light because they are not working on the front and back. If you can show me how to replace the light I would appreciate it.
Thanks for all the useful information! Can you point me to any videos to replace the rear caster wheels on the F5 Permobil chairs?
ive got service manuals on the website - brokenwheelchairs.com
but if you're JUST replacing the tires, the process is essentially the same as this chair - ruclips.net/video/QyokmPZULjA/видео.htmlfeature=shared&t=153
I have a 2023 pro mobile F3 with squeaking things coming from the frame area. Could you pull up the video again that you showed before with what to do when this problem occurs
anti-tippers are not interchangeable, no marking to say this is for the left side, is for the right side
I think I'm going to remove mine when I get new tires. The hit on everything when I try to get close.
You can move the small wheels to the inside of the bracket, it helps alot and it is easy to do
My old f3 came without them and it made moving around in the kitchen a lot easier!
I was just wondering if you can fix for a fee of course or can u direct me as to were I can get my permobil joystick repaired. It got damaged in the rain . My carport collapsed that's how it got wet.
Do you think backrest canes can be fitted to an F3 instead of the centre-post type backrest? I know the M1 has sort of a backrest cane frame thing, but would it fit on an F3? Dealer will not do but a friend just cannot use the chair the way it is. Having canes allows us to build a back that works for her.
I have a project going that I wanna be able to control with a power chair joystick ... would you be willing to help me out ?
Those bolts should have Antisieze on them or dissimual metals may cause a problem down the road
how do you remove the hub is it fairly easy? thanks
Question for you
Do you know if medicaid will cover a replacement chair before the five year min ? Or dose it have to be at least five years and the chair has to be totally worn out? Mine is about four years old and all the bearings and toast and needs some tlc. It's a jazzy 600es
And I want something better. But if I have to wait I guess that's what I will do l.😬
Dan, I have a F5 and a C 500. I want to change my stock tires out for my F5 aggressive tires. What spacers or adapters will I need?
they're a direct replacement - no mods required! pretty much all permobil tires over the last 15 years are the same size :^)
I have a 2021 Perma mobile. I want to put a back up camera on it. They want over $450 for a plug and play one that uses the same connector as the chair does. But I found a back up camera on eBay that doesn't have any connector for about $90 bucks. Do you think I could make the eBay one work, and what type of plug would I need.
you'd also need to mount the screen for it somewhere.. but it can be powered directly from the batteries. the R-net cables on the chair arent for sale anywhere - BUT you can buy short cable son ebay and cut them in half to get 2 connectors!
Hello, I have a f5 standing frame. IM having a issue where it only go 3/4 up and I can't move the chair until I give down
The quick positioning buttons flash red
Thanks
sounds like something might be binding up and causing the actuators to go into an over-current state - and that makes the red lights flash
We just received an F5 for my 8 year old son (growing fast). Do you have any satirical guidance on adjusting the programming for the modified sit to stand motion?
ahhh so that's one of the more complex things to adjust... honestly id get the DME/Dealer to come put and make the changes for ya. ive played with it a bit, but always end up screwing up one of the steps in the process!
Can you repair my electric wheelchair, quike qm710 model
Can you get a used one?
i see the anti tippers on ebay from time to time..
Hi, I have another F3 question I'm hoping you can help with: I have an external switch connected to my controller that enables me to change modes. Is there a way that I can turn the lights on using the same switch or another switch? As of right now, if I plug a switch into the hole next to the existing I can only turn the chair off and on using a switch. Thanks !
in theory, its possible to change the programming so the external switch can control the lights, BUT i've never tried setting that up... regardless you'd need a programmer/USB dongle, or a DME / Rep that knows what they're doing :^)
Totally need anti-tippers on my f3. It's my backup wheelchair. But I've tipped forward in it before and if I didn't have strength in my calves to push on my foot plate I woulda fell face forward. 😂 Just gotta take it slow in certain areas.
Hi Dan! I recently received a new F3. I had an EZ lock bracket installed on it. Now, every time I lock into my van, I receive the following message on my chair controller: "PM Gyro Performance Active 9450". Once I release from the lock, and turn my chair off/on, it is fine. Any ideas why this is happening? Thanks
so thats a known issue with PG drives (the maker of R-Net) - they stared using another type of gyro.. and those errors can happen with EZ locks, and also in a moving transit bus or train. a power cycle will fix it.. but if it becomes an issue, permobil told me to have people contact their local rep, and they can swap it out for the older style. for now though, its not a "problem" but just kinda how things are :^/ (apparently PG drives isn't too concerned about fixing the issue)
Hello Dan I have problems with low blood pressure right now I am in a C300 originally it came with a react recline actuator it would break around every 2 weeks it would strip out because of my constant use. So they agree to put on a linak recline actually because it was much stronger and beefier unit. That seem to solve the problem it lasts for a little bit over a year before they have to replace it which was awesome. I just received a new F3 and I noticed on the recline it is very slow speed moving up and down do you know of any way to modify that to move a little bit faster up and down? I am also wondering if that actuator is going to hold up hopefully? Any input would greatly be appreciated!
typically slower = more gear reduction - which means it isn't working as hard, and should last a while :^)
Never had them on my F5 chair. Are they needed on the F3. Does it tip?
it sure can! depending on the situation.. if you're indoors most of the time its not too bad - but even one forward tip isn't super exciting! lol
Will the seat back tilt actuator off an Amy systems chair fit my quantum chair
unfortunately they typically use completely different seating systems :^/
@@TotallyNormal- thanks Dan
can I put f5 motors on a f3 Permobil ?
they wont bolt up without different front swing-arms BUT that's the main difference between the 2 chairs. they are almost identical - just different motors, shocks and a taller seat lift
hello I am looking for a wiring manual for my 2023 Permobil M3 Corpus I want to wire in some lights or conversely if you have a set of led lights you could sell me at a not Outrageous price I would be willing to buy them my wheel chair was puchased for me by the Government because I live on a disability pension which is a joke Please contact me and let me know
check the video description :^)