Exactly, those saw all or reciprocating saws with long coarse blade are really useful cutting roots. Truly amazing the holding power of a few roots have.
That angle puts ENORMOUS force on that chain!! There are physics tables to show just what “quite a bit of tension” you’re creating. Be quite careful!! Slip hooks and grab hooks, by definition…
Very true. I think the term might be 'yield angle'. Not sure. The concept is that as the chain is spread out flatter and flatter, the tensoin on the chain goes up exponentionally. Maximum angle should be something like 60*. The chain in this vid was more than double that. IDK what the real numbers are, but i doubt this chain was anywhere near breaking, because the tree came out easily enough. Just thought a word of caution was in order for viewers who dont know.
Farm jacks have been very useful for over a century. My grandpa had one....the handle was hickory...not kidding. However, they have injured many people (and killed a few) who did not understand their limitations. They are a tall, straight line, therefore very unstable. When they flop it is usually after a tremendous amount of energy has been levered into them. Stabilize before loading. ALWAYS keep your face OUT of the plane of travel of the jack handle. It can become a ballistic arc. When attaching the jaw to the load using a chain, the direction of the load force needs to be parallel with the main beam of the jack and as close as possible to it. Stay safe everyone. Here’s a method that’s much stronger and safer than a farm jack.ruclips.net/video/pccuAUNwfw8/видео.html
Good job but a few pointers. Wrap the anchor tree with a hunk of carpet or a section of old tire to spare the bark damage. Also, wet the ground around that bush a few hours before (night before?) to make the ground softer. 50 gallons of water is want mother nature would do before a good wind would blow things over easily.
He’s not brainless the other tree is already junk and that’s why the chain is sinking into it so easily BECAUSE it’s punky ( old dead)! the wood is PUNKY U can see it
yeah, pine or scrub pine is usually too soft.(it wasn't punky) should have collared it to protect it. But really that was pretty dangerous, would have repositioned jack to keep straight, close to slipping. But really, would have dug out by hand was tiny and it's good for you
Great content for your channel just maybe mention safety measures for people at home that decide to try this and get a tensioned strap snap and smack them on the face. Using a tripod for the jack and cutting the tree down before trying to rip it out is safer and avoids damaging other trees in the process. Was still a good video to watch tjo mate
Thank you for the great insight. One thing, it’s not good to use cement under the Jack ever. They tend to crack. A piece of wood is more reliable. I have an old Dodge Aspen from the 70s, and have use the bumper jack and chain to remove fence posts trees etc.
Don't use your trailer hitch ball as your attachment point the truck. Ryan Woods was killed September 2022 during off-road recovery with his 3 young children in the backseat. When the ball hitch on the rescue vehicle broke, it went straight through the windshield of Ryan's stuck vehicle, deflected up and instantly killed him. Again, his 3 children were feet away int he backseat, his wife was in the driver's seat, and his friend was driving the rescue vehicle . With the permission of the wife, the youtube channel Colorado 4x4 Rescue and Recovery did a 19 minute video breaking it down with the hope of saving lives in the future. The video gives the ratings of all the equipment used and calculates the force's involved. "Breaking down the Arizona Fatal offroad recovery" -- ruclips.net/video/Mb3BkeeXlIo/видео.html Stay safe everyone.
Cool idea but next year we'll be watching him pull out the other tree because it died from the damage it suffered. He should have wrapped it to prevent damage from the chain.
Do that at your own risk. The instructions for my farm jack say not to do that. The four-foot handle should be enough. More than that might break something, including flesh and bones.
You've ringbarked the other tree so you're going to have to deal with another unwanted tree in the not too distant future. A few scraps of 2x4 or a rubber matting would have saved the other tree. You can also add an extension pipe (slightly bigger and longer than your jack handle) to offer more leverage, but overall this isn't a preferred method for destroying 2 trees at once.
Nope! I don't think you did! Just read what you said 1 month ago to someone else who pointed this out "Yeah...it turns out the bigger tree didn't survive :( ..." Never mind. We've all made mistakes. I've made plenty.
No mechanical advantage here. The force on the chain is the same in both directions. the only thing you change by moving the chain closer to the target tree is the force vector. You killed the other tree for no reason. Try a tree strap next time
I have done this many times. I soak the ground under the tree, put a heavy duty chain around truck axle and the other end of chain looped about bush. Go slow. Works for me. 67 Woman in Texas.
Anyone watching this. Never put that much throtle on a loose pull connected to your truck. That is just asking to have your back end get ripped out. Slowly put pressure on the chain or strap and then after it is tight you can accelerate.
Next time place two short 4×4 on both sides of the anchor tree, so there is no damage to the tree....also use a hose to wash the dirt out and off of the stump
Man that was like the most unsafe video i have ever watched on here,do not do what this guy did..any of it. just cut the tree down and pay someone to grind it away for you or burn it out, he basically killed the other trees heartwood,if that jack slipped off its stand towards him or that tow strap snapped...just dont do this.
Hmmm, time to re-asess. Do you enjoy shade? looks like a crepe myrtle tree in good condition. Leave it in place and plant around it. Or just leave the lawn. Shade trees add to the aesthetics of your yard.
if you want to go for this method. I would recommend you cut one of those limbs into short pieces and put that as a filling between the chain and the tree that you want to keep it will protect the bark en distributes the tension around the trunk of the remaining tree. But personally I won't choose this method the car is ruining your grass. You are putting a lot of strain on the remaining tree. Grinding up the stump after cutting the tree sounds much safer and has a lot less of an impact on the rest of the garden.
Not efficient the force is practically halved. The force should be close and as vertical as possible. Ruining the other will make die. Also you have to be carefull the jack handle can fly in your face if you are to close.
Don't jerk a chain like that. Tension it first, then apply force, or you'll permanently overstretch, deform, and weaken the links. That chain's safe working load has been reduced by at least 30%.
The propee way to to this would be to attach once chain to the tree and the top of the jack and the other one to the moving part and the other tree. This way you sont lose half the power and dont risk it tipping over.
How did you sleep that night? Looks like you put this kind of effort once a blue moon. Anyway, it looks quite dangerous. That jack is under a lot of pressure and it can take off on you. I would definitely not recommend it.
Given all the tension created, a winch damper or a heavy blanket on that chain (or cable) would have added protection if it broke. Here's a video of that being tested. ruclips.net/video/gPba-34ARZY/видео.html
You just killed the big tree. If its not dead yet it will be. Trees feed via the bark, cutting the bark off the truck all the way around it cuts off the tress water supply. It cant heal and cant recover from this. People do this to slow kill a tree and it works over time.
I think you will find Roundup can only be absorbed by the LEAVES OF A PLANT and is neutralised on contact with the soil , well , that’s what it says on the bottle , anyway , so it won’t kill a stump
The slo-mo replay was even more satisfying than my cup of coffee this morning.
Great video! What really impressed me other than the fact that you actually pulled that tree out, is how strong that paver is!!😮
I was watching this and my 4 year old BUSTED out laughing when you yanked the tree with truck! Thank you for not leaving that out!
Out of all the things in this video, that tree is the last thing I'd ever call ugly.
If that Jack slips... You've gust created a bow and arrow.
A little bit of digging and cutting some of the major leader roots would have saved some time/effort on the back end, I do believe
Exactly, those saw all or reciprocating saws with long coarse blade are really useful cutting roots. Truly amazing the holding power of a few roots have.
THANK YOU THIS MAN IF HE,S STILL LIVING IS VERY DANGEROUS PLEASE DO NOT BREED.
Would it be worth watering the ground around the tree to be removed.
That angle puts ENORMOUS force on that chain!! There are physics tables to show just what “quite a bit of tension” you’re creating.
Be quite careful!!
Slip hooks and grab hooks, by definition…
Very true. I think the term might be 'yield angle'. Not sure.
The concept is that as the chain is spread out flatter and flatter, the tensoin on the chain goes up exponentionally. Maximum angle should be something like 60*. The chain in this vid was more than double that.
IDK what the real numbers are, but i doubt this chain was anywhere near breaking, because the tree came out easily enough. Just thought a word of caution was in order for viewers who dont know.
Farm jacks have been very useful for over a century. My grandpa had one....the handle was hickory...not kidding.
However, they have injured many people
(and killed a few) who did not understand their limitations. They are a tall, straight line, therefore very unstable. When they flop it is usually after a tremendous amount of energy has been levered into them. Stabilize before loading. ALWAYS keep your face OUT of the plane of travel of the jack handle. It can become a ballistic arc.
When attaching the jaw to the load using a chain, the direction of the load force needs to be parallel with the main beam of the jack and as close as possible to it.
Stay safe everyone.
Here’s a method that’s much stronger and safer than a farm jack.ruclips.net/video/pccuAUNwfw8/видео.html
I must use what I have, a farm jack. I have a lot of tools and they should suffice for one job.
Good job but a few pointers. Wrap the anchor tree with a hunk of carpet or a section of old tire to spare the bark damage. Also, wet the ground around that bush a few hours before (night before?) to make the ground softer. 50 gallons of water is want mother nature would do before a good wind would blow things over easily.
Wetting the ground is a great tip. Thanks!
Holding the jack in one hand whilst levering with the other is a great way to break bones if the handle slips from your hand under pressure
Brainless. He's basically killed the other tree as well.
He’s not brainless the other tree is already junk and that’s why the chain is sinking into it so easily BECAUSE it’s punky
( old dead)!
the wood is PUNKY U can see it
yeah, pine or scrub pine is usually too soft.(it wasn't punky) should have collared it to protect it. But really that was pretty dangerous, would have repositioned jack to keep straight, close to slipping. But really, would have dug out by hand was tiny and it's good for you
Yeah, he might have used his truck rather than the tree.
Great content for your channel just maybe mention safety measures for people at home that decide to try this and get a tensioned strap snap and smack them on the face. Using a tripod for the jack and cutting the tree down before trying to rip it out is safer and avoids damaging other trees in the process.
Was still a good video to watch tjo mate
Great point! Cutting the tree down first would also remove the risk that it falls onto the truck.
because the chain is sinking into bark and killing the flow of sap what you are doing is called girdle the tree and you kill it
Thank you for the great insight. One thing, it’s not good to use cement under the Jack ever. They tend to crack. A piece of wood is more reliable. I have an old Dodge Aspen from the 70s, and have use the bumper jack and chain to remove fence posts trees etc.
Great tip!
What’s a HAM MOCK? 😂
Those are the aprons that amish women wear.
Don't use your trailer hitch ball as your attachment point the truck. Ryan Woods was killed September 2022 during off-road recovery with his 3 young children in the backseat. When the ball hitch on the rescue vehicle broke, it went straight through the windshield of Ryan's stuck vehicle, deflected up and instantly killed him.
Again, his 3 children were feet away int he backseat, his wife was in the driver's seat, and his friend was driving the rescue vehicle .
With the permission of the wife, the youtube channel Colorado 4x4 Rescue and Recovery did a 19 minute video breaking it down with the hope of saving lives in the future. The video gives the ratings of all the equipment used and calculates the force's involved.
"Breaking down the Arizona Fatal offroad recovery" -- ruclips.net/video/Mb3BkeeXlIo/видео.html
Stay safe everyone.
Cool idea but next year we'll be watching him pull out the other tree because it died from the damage it suffered. He should have wrapped it to prevent damage from the chain.
@1:07 Ooooooo trigonometry! Well hello smart. @1:07 I’m loving this jack. I’m ordering one today.
The upward force vector is a lot less the way he was doing it.
Find a metal pipe that fits the handle to Increasing the leverage ratio. Make the handle longer another 2 to 3 feet.
Do that at your own risk. The instructions for my farm jack say not to do that. The four-foot handle should be enough. More than that might break something, including flesh and bones.
You've ringbarked the other tree so you're going to have to deal with another unwanted tree in the not too distant future. A few scraps of 2x4 or a rubber matting would have saved the other tree. You can also add an extension pipe (slightly bigger and longer than your jack handle) to offer more leverage, but overall this isn't a preferred method for destroying 2 trees at once.
Yes, this method didn't do the bigger tree much good, but I had planned to remove both trees anyway.
Nope! I don't think you did! Just read what you said 1 month ago to someone else who pointed this out "Yeah...it turns out the bigger tree didn't survive :( ..."
Never mind. We've all made mistakes. I've made plenty.
No mechanical advantage here. The force on the chain is the same in both directions. the only thing you change by moving the chain closer to the target tree is the force vector. You killed the other tree for no reason. Try a tree strap next time
You need a remote controlled power device, like your neighbor for instance, to do the dangerous work.
Did you check to see if there was a grave under the concrete slab you found?
Yikes!
I have done this many times. I soak the ground under the tree, put a heavy duty chain around truck axle and the other end of chain looped about bush. Go slow. Works for me. 67 Woman in Texas.
Anyone watching this. Never put that much throtle on a loose pull connected to your truck. That is just asking to have your back end get ripped out. Slowly put pressure on the chain or strap and then after it is tight you can accelerate.
This was hilarious. When I heard the motor, I thought, "no he di'int!"
Next time place two short 4×4 on both sides of the anchor tree, so there is no damage to the tree....also use a hose to wash the dirt out and off of the stump
That's a smart idea, at least I learned something from this comment, thx
If I'm not mistaking the bigger Hook is called a slip hook and the smaller is called a clevis hook
“Simple trigonometry”
Yeah you know all the forces in trig. /s
a high lift jack is 1 of those tools every man should own
Almost every man
Should've used a tyre to remove trunk
I think the concrete slab marked where the body was buried.
Man that was like the most unsafe video i have ever watched on here,do not do what this guy did..any of it. just cut the tree down and pay someone to grind it away for you or burn it out, he basically killed the other trees heartwood,if that jack slipped off its stand towards him or that tow strap snapped...just dont do this.
Agreed, even him pulling trees with that truck was done stupid.
Hmmm, time to re-asess. Do you enjoy shade? looks like a crepe myrtle tree in good condition. Leave it in place and plant around it. Or just leave the lawn. Shade trees add to the aesthetics of your yard.
I'd be worried about the chain snapping!
Don't ever do this! So dangerous. Everything he did was wrong.
The way you say hammock makes me hungry.😋
I'm looking to do the same, but wouldn't a chain saw and small stump grinder work as well?
Sure...but where's the fun in that? Lol.
Darwin gave this guy a pass that day.
Don't do what this guy did.
Yep.
It worked but that is about the only positive from this video. How are you going to remove the bigger tree that you destroyed in the process?
Lol next video he shows us how to drop a tree on the fence?
Nice problem solving!!
I was NOT ready for that extraction! 😂😂😂😂😂😂😂
Be safe young man.
Good work David
Looks like renting a skid loader would be safer and faster but not cheaper,unless you figure the possible hospital bill.
4:05 was mighty epic enough!
Man, I didn't think the tree would come up like that! Good job.😂😂👍👍
if you want to go for this method. I would recommend you cut one of those limbs into short pieces and put that as a filling between the chain and the tree that you want to keep it will protect the bark en distributes the tension around the trunk of the remaining tree. But personally I won't choose this method the car is ruining your grass. You are putting a lot of strain on the remaining tree. Grinding up the stump after cutting the tree sounds much safer and has a lot less of an impact on the rest of the garden.
I want to see that hamhock
Call me crazy but I don't think you want to be standing there next to the jack when the chain snaps.
What is a ham-Ohk?
@3:36 Whats not to like on a nice jack reaching a maximum load? 😂
Not efficient the force is practically halved. The force should be close and as vertical as possible. Ruining the other will make die. Also you have to be carefull the jack handle can fly in your face if you are to close.
Simple trigonometry???? I have a hard time with addition.
Omg under all that tension from the truck and he was jacking it from knee height. If the yellow cord malfunctioned you would of been wiped out
garden hose would make short work of removing dirt from the root ball
That looked like a great way to snap a tow strap and take it directly to the face. #darwinism
are we not going to talk about the pronunciation of hammock hahahahahahah
Did you harm the remaining tree?
Nice job. Thank you.
Don't jerk a chain like that. Tension it first, then apply force, or you'll permanently overstretch, deform, and weaken the links. That chain's safe working load has been reduced by at least 30%.
Epic video man.
The propee way to to this would be to attach once chain to the tree and the top of the jack and the other one to the moving part and the other tree.
This way you sont lose half the power and dont risk it tipping over.
next time dampen the tree roots thoroughly then slow-pull with the truck will be enough.
That's a good tip. Thanks!
Why not use the truck?
Good work. Thanks!
Odd enunciation of hammock. Ham Ock
You got it out, but at the expense of killing a healthy oak tree.
I was nervous the chain was oing to break
Quite clever really. Dangerous like but clever nonetheless
How did you sleep that night?
Looks like you put this kind of effort once a blue moon.
Anyway, it looks quite dangerous. That jack is under a lot of pressure and it can take off on you.
I would definitely not recommend it.
Jackin is hard work. He does not need the gym now.
Given all the tension created, a winch damper or a heavy blanket on that chain (or cable) would have added protection if it broke. Here's a video of that being tested. ruclips.net/video/gPba-34ARZY/видео.html
A lot of comments here about the things that could have gone wrong. If something did go wrong it would get way more views.
The truck is in your backyard, Why not use the truck to rip it out.
You’re gonna lose an eye putting that much pressure on that cheap Jack..
Haha just jokin.. nice work…
The mind is the strongest muscle.
HAM MOCK!!?!?!? Hes from the future
It is kind of a dump set up.
Ham hock?
Never working with this guy, dangerous
He is my coworker his name is evil knievel
I'll try anything except a shovel
You just killed the big tree. If its not dead yet it will be. Trees feed via the bark, cutting the bark off the truck all the way around it cuts off the tress water supply.
It cant heal and cant recover from this.
People do this to slow kill a tree and it works over time.
Good trick to remember. Thanks
Well-done mate 👍
Surprised that your truck could not pull it out. If you cut the roots at first then the truck could have pulled it out.
Think you just killed both trees
Yeah...it turns out the bigger tree didn't survive :(
It’s called ringing, when the bark of a tree is cut all the way around the tree dies
If the concrete could stay there... why not just cut the bush and let the roots stay there?
It probably depends on the species of bush, but I was concerned it would just grow back if I didn't pull out the roots.
Just cut flush to the ground and spray roundup
I think you will find Roundup can only be absorbed by the LEAVES OF A PLANT and is neutralised on contact with the soil , well , that’s what it says on the bottle , anyway , so it won’t kill a stump
You got to cut through the bark and put down some Tordon.
Make sure you use a cheater bar. Makes it much easier...
Slap of concrete.now what under the tree and the slap of concrete. Humans remains.
You are a powerful man
I kept watching expecting someone to die.
Damn dude..it was fun
Good job !
Nice video!!
shocking the truck frame in the end was very foolish.
I almost don't weigh enough...lol
Never mind, that was cool.