Hi Tevz, during testing, instead of using the 220Ω/20W resistor to test (in place of the blown fuse), can we use a 60W Series Lamp instead? Thanks for your reply.
Tevz you are very experienced in your job but lacking one basic tool in your workshop. There should be one power socket with series 100w bulb. It will be very handy in testing the repaired circuits. Putting the series resistor every time is a bit time consuming. Using a series bulb will give you the visual clue about the short as soon as u plugin the circuit.
Good work 👍 ❤ This video is quietly different from others repair. Am asking myself supossed if there not and equivalent mosfet to replace. I think you would use strw6053 if am not wrong sir. 🙏
How was the 220ohm 20 watt resistor wired?Seems to me that the yellow and black wires are connected together on one lead and also connected together on other lead.
hi I have a hisense 65r6e1 that lights up you can see the screen light up perfectly with no problems but no menu screen I can hear switching into different menus and hear regular TV but it does not show nothing but the screen is on help?
What resistors did you use for making your test resistor jig (i mean what are the parameters of the individual pieces and what is their connection and wattage)?
@@tevzTVTevatronicsThanks a lot. (I asked you because in another of your videos you said the jig is 50W, which needs more than one ceramic resistors connected together in order for them to reach this power level).
Hey I have a Sanya 24",I replaced the screen,now it's stuck on burning mode/shipping mode,have tried pressing power button for 5sec but no results,,how should I exist burning mode
well,iam watching from Sri Lanka.I do repair work and i learning from your videos.
Good to hear
You are the best sir ❤
Excellent approval rating of your videos.... You can learn a lot from this guy...
I appreciate that!
Hi dear tevz.i always like your skills on repairing of tv.s
And this one was so great.
nice work master
Good show thank you
Well, i am watching from Bangladesh. I do repair work. And i am learning From your video. So thank you.
You are welcome
Excelente reparación y explicación de porque el puente de diodos no marcaba corto al inicio. Muchas gracias por compartir sus conocimientos!
Дякую за працю.
Ви дуже гарний мастер.
Бажаю вам успіхів.
Good works Tevz. Well explained
Much appreciated
Maestro thank you very much for the video.👍
good job
You are a creative person
unti unti ako natututo sir, sa mga upload mo mga videos salamat sir, idol sana wag k mag sawa mg upload ng mga bago videos mo godbless😊
Lods awesome 💯
Hi Tevz, during testing, instead of using the 220Ω/20W resistor to test (in place of the blown fuse), can we use a 60W Series Lamp instead? Thanks for your reply.
Good job like always ❤
Very good video sir
Well, iam watching from Bangladesh. I do repair work. I am learning form your video. So thanks.
You are welcome
Watching master
Good job sir ❤
Love your skill very much sir
Thanks good day for you👍
Greater job always
Watching Po sir tevs no skip ads.
Wow, thank you
Thanks a lot ❤
Kolay gelsin meslektaşım
Przy próbach zamiast rezystora radzę stosować żarówkę 60W. Jeżeli się zapali to znaczy że mamy zwarcie. Pozdrawiam z Polski
Old way
Genau so sehe ich auch
Grüß nach Polen 🇵🇱
Thanks sir
Tevz you are very experienced in your job but lacking one basic tool in your workshop. There should be one power socket with series 100w bulb. It will be very handy in testing the repaired circuits. Putting the series resistor every time is a bit time consuming. Using a series bulb will give you the visual clue about the short as soon as u plugin the circuit.
Excellent 👍🏻
Good work 👍 ❤
This video is quietly different from others repair.
Am asking myself supossed if there not and equivalent mosfet to replace. I think you would use strw6053 if am not wrong sir. 🙏
Yes, correct
@@tevzTVTevatronics thanks. 👍
great master ❤❤❤❤
Very educative.. good job❤❤
Thank you! 😃
Good job master
Thank you
Thank you too
How was the 220ohm 20 watt resistor wired?Seems to me that the yellow and black wires are connected together on one lead and also connected together on other lead.
yes, connected to resistor lead.
good
hi I have a hisense 65r6e1 that lights up you can see the screen light up perfectly with no problems but no menu screen I can hear switching into different menus and hear regular TV but it does not show nothing but the screen is on help?
Agbiag..! 👍
Gooood❤
Mr Tevz suppose you ain't got scrap tv boards....where should i get spares....in South Africa
scrap yard
sana mapuntahan kita master...
laoag city ako
Please don't skip adds ❤thank you 😊
👍
What resistors did you use for making your test resistor jig (i mean what are the parameters of the individual pieces and what is their connection and wattage)?
220 ohms 20 watts
@@tevzTVTevatronicsThanks a lot. (I asked you because in another of your videos you said the jig is 50W, which needs more than one ceramic resistors connected together in order for them to reach this power level).
Hey I have a Sanya 24",I replaced the screen,now it's stuck on burning mode/shipping mode,have tried pressing power button for 5sec but no results,,how should I exist burning mode
check lvds cable
good morning po idol shout out po Salazar family from malate manila
bulacan baliwag
samar leyte
shout out din sayu
gud day sir anong model ng hot ma advice mo para beginers na technician kagaya ko tnx sir
hot air? lahat pwede
Teşekkürler emeğinize sağlık. Güzel bir video olmuş.Sağlık ve bereketli günler.
What kind of soldering lead..you use...
Do You use soldering flux
The one that master uses is flux core soldering wire
Sir mospad no plz reply
This problem is feedback circuit
Good works Tevz. Well explained
Thanks sir
Welcome