I really like the way you teach us how to solve the problem in tv or other electronic devices. You are really a good teacher. And you are the one who is my favorite on youtube. Everyday when I don't see new video for us. So I scroll in your Playlist and keep watching the old one. It's like a school I keep revising the old one. To make sure I understand it properly. If you was in my country I would already book you as my teacher in electronic. Thanks a lot Tevz. For all your videos. May lord bless you and your family. ❤❤❤
Thanks with this knowledge MR TEVZ keep up your knowledge is amazing again thanx for sharing others prefer to die with their knowledge not sharing to others
Dear Sir. Forever grateful for your time and the knowledge you share. Surprised by that information about the application of the VGH with the terminals of the multimeter. 👍🙏👏
thank you for sharing your , I have gained a lot from you. i work in an electronic repair shop , i tried to modify tv switch mode power supply with str 6053 ic , but the 12 volts kept fluctuating ,is there away to solve this problem
Hey sir, great video. Keep it up! I have only one question does this method apply only on VGL or you can also use it if VGH is missing? Also do you bypass it from any COF or it's specific?
@@tevzTVTevatronicsok thankyou, im just trying to learn, your videos are excellent , you are one of the best by far , and i watch alot of repair channels. Much respect
But according to the measurements VGL voltage is also present on the screen just like on the T-con why reconnecting it again or do you think there's a partial contact 😢
The measurement of the vgl on the side cof is 0.662 so that means no vgl voltage is present. Vgl on the t-con is -6 volts. So that means vgl circuit from t -con to side cof is open.
Resp Sir! Dell 18inches Monitor all Voltages are Good Sir at Scaller board but Screen was Blurring, Horizontal Vertical Bars and Dots Sir, That Same Problem Sir or Not Sir. Please Advise Sir. -- ChinnaRao, Lochaliput Colany, Paderu, Visakhapatnam District, Andhra Pradesh.
Respect for your determination to get the job done.
Better then factory.
I really like the way you teach us how to solve the problem in tv or other electronic devices.
You are really a good teacher. And you are the one who is my favorite on youtube. Everyday when I don't see new video for us. So I scroll in your Playlist and keep watching the old one. It's like a school I keep revising the old one. To make sure I understand it properly.
If you was in my country I would already book you as my teacher in electronic.
Thanks a lot Tevz. For all your videos.
May lord bless you and your family.
❤❤❤
Am impressed with your work and you make easy for us to understand keep it up🙏🙏🙏
Im so very impress... Your a good guy.. nasa isip q maglalagay kyo ng bagong power supply na stepdown ppuntang LCD screen ng VGL😊😊😊
Wonderful ideas
I like your video keep them coming
Great repair.
Wow! Very well explained! Salamat po Kuya Tevz🤗
You are realy very good tv technician
Thanks with this knowledge MR TEVZ keep up your knowledge is amazing again thanx for sharing others prefer to die with their knowledge not sharing to others
Great job
My favorite and best technicien
Good job 👍. 🙏❤️
Hai it's wonderful fantastic work
nice and great job 😀
The printed track in the glass going around to the first side COF is open circuit. Great job.
Thanks bro.
Very useful video sir 🌹
Great Sir. More videos like that you are awasome.
Thank you, I will
Waw great job like always 👌
سلام عليكم احسنت يامبدع آلله يزيدك من فضله
❤❤❤❤❤ Great master thank you very much
thanks 👍👍👍
Very very good experience with your video good video good video good video good
Thank you very much
seguimos aprendiendo.
Dear Sir. Forever grateful for your time and the knowledge you share. Surprised by that information about the application of the VGH with the terminals of the multimeter. 👍🙏👏
super nice video😍
See you again
🌺
super !
Super sir
Thanks for good tips and ideas sir
Keep watching
Super good boy
Nice bro
I wish l new a 1/4 of what you know!
Saludos desde Perú agradesco sus enseñanzas , de q calibre o medida es el cable esmaltado agradesco su respuesta
Nice
Good boy
Obrigado por compartilhar seu conhecimento, como que se indetifica quem é quem no cof
👍👍💯💯 TCL great
Good video sir 👍👍👍
Thanks 👍
Best
احسنت
👍
Good work sir please My question is why do you use both digital and analog multimeter so what's the secret in using both multimeter thanks
An Analog meter is faster than a digital meter.
I have a same problem with my A&S TV (Malaysian made) hope that this video can help to fix a blurry white screen
thank you for sharing your , I have gained a lot from you. i work in an electronic repair shop , i tried to modify tv switch mode power supply with str 6053 ic , but the 12 volts kept fluctuating ,is there away to solve this problem
check VCC if the supply is sufficient.
Hey sir, great video. Keep it up!
I have only one question does this method apply only on VGL or you can also use it if VGH is missing?
Also do you bypass it from any COF or it's specific?
It's also to VGH and 3.3v stv.
Sir I want to take a class on LED TV with you please arrange to meet with you
Hi Mr Tevs. I have a 49 inch Jvc tv. t con voltages is good but still showing vertical Bars. even after using taping method. any advice.
Are these 2 power rails present on all lcd tvs ? (VGL and VGH?) And are they usually similar voltages ? (26 and -6)
Not all.
@@tevzTVTevatronicsok thankyou, im just trying to learn, your videos are excellent , you are one of the best by far , and i watch alot of repair channels. Much respect
My friend it was useful for me but how to disappear should that horizansl lines at the end.?!
No chance to remove it.
Are vertical lines consequences of bypass or another issue cause that?
another issue that can't be repair.
Sir please tell me how to clean solder bit it always gets oxidised
Clean it with flux and rag.
But according to the measurements VGL voltage is also present on the screen just like on the T-con why reconnecting it again or do you think there's a partial contact 😢
The measurement of the vgl on the side cof is 0.662 so that means no vgl voltage is present. Vgl on the t-con is -6 volts. So that means vgl circuit from t -con to side cof is open.
Resp Sir! Dell 18inches Monitor all Voltages are Good Sir at Scaller board but Screen was Blurring, Horizontal Vertical Bars and Dots Sir, That Same Problem Sir or Not Sir. Please Advise Sir. -- ChinnaRao, Lochaliput Colany, Paderu, Visakhapatnam District, Andhra Pradesh.
Not sure, 18 inches panel is different.
First to comment 😊
Yes you are!
@@tevzTVTevatronics how are you Sir?
@@sikwenzesisonke7276 Im fine. thanks
Excelente
👍