Hello Thank you for this video. However, I can’t access the dji pilot app with my m210 RTK - it says it’s not the right app. Can this setting also be found and changed in the dji go 4 app? I can’t find it…
What do you enter for mountpoint? I am using Massachusetts macors. I found the closest tower name and what i believe is the port info. I entered RTK for the mountpiece. I actually did this in my house near a window. It didn’t appear to be doing anything. Funny thing is a few minutes later it said manned Aircraft in area use caution, and right then i could actually here a small plane fly by. I shut everything down to try and do it again but the second time it never connected. I think i may have to take it outside. But still undure about mountpiece, and you never mentioned it in the video. Thank you
Hi @drumatruka - I'd suggest dropping an email to the CORS support folks at the state. The mountpoint you use can change the base selected and satellites used among other things. You should be able to choose a mountpoint that either picks the nearest base or VRS and uses all satellites available in the MA system. Take the system outside for all validation tests. Indoor tests are never reliable.
Thank you for this. Just got my M30T and want to try RTK with the DJI RC Plus controller. I live in Knoxville, TN and the only site I could find with current networks is Tennessee's DOT map of CORS networks. I'm not sure if CORS applies to RTK for drones and truthfully don't know what I'm even looking for. I tried the MatricePilots forum but that place is a ghost town. If CORS is not the right thing to be looking for, would you know where to look for the city of Knoxville area? Thanks for any advice or tips.
Hi @gsquared_08 We can't speak specifically to the TN network but I'd suggest you start here -www.tn.gov/tdot/roadway-design/survey-standards/gnss-reference-network.html There is an email and phone # where you should be able to get the answers to your location specific questions. The TN CORS network should broadcast the information you need to connect any RTK capable DJI drone.
You will have to reach out to your CORS network provider to make an account and connect to their network. It's the same process a surveyor would use to connect a network rover. Depending on your location you may have to pay a subscription fee.
Hello
Thank you for this video. However, I can’t access the dji pilot app with my m210 RTK - it says it’s not the right app.
Can this setting also be found and changed in the dji go 4 app? I can’t find it…
What do you enter for mountpoint? I am using Massachusetts macors. I found the closest tower name and what i believe is the port info. I entered RTK for the mountpiece. I actually did this in my house near a window. It didn’t appear to be doing anything. Funny thing is a few minutes later it said manned Aircraft in area use caution, and right then i could actually here a small plane fly by. I shut everything down to try and do it again but the second time it never connected. I think i may have to take it outside. But still undure about mountpiece, and you never mentioned it in the video. Thank you
Hi @drumatruka - I'd suggest dropping an email to the CORS support folks at the state. The mountpoint you use can change the base selected and satellites used among other things. You should be able to choose a mountpoint that either picks the nearest base or VRS and uses all satellites available in the MA system.
Take the system outside for all validation tests. Indoor tests are never reliable.
thanks, Thats what I did and now I am connected. Thank You
@@QuantumLandDesign
dji mavic 3E custom RTK HI Target V300.?
Thank you for this. Just got my M30T and want to try RTK with the DJI RC Plus controller. I live in Knoxville, TN and the only site I could find with current networks is Tennessee's DOT map of CORS networks. I'm not sure if CORS applies to RTK for drones and truthfully don't know what I'm even looking for. I tried the MatricePilots forum but that place is a ghost town. If CORS is not the right thing to be looking for, would you know where to look for the city of Knoxville area? Thanks for any advice or tips.
Hi @gsquared_08 We can't speak specifically to the TN network but I'd suggest you start here -www.tn.gov/tdot/roadway-design/survey-standards/gnss-reference-network.html
There is an email and phone # where you should be able to get the answers to your location specific questions. The TN CORS network should broadcast the information you need to connect any RTK capable DJI drone.
Very helpful. Mine shows 40 satellites on the rtk but it says not connected. Do you happen to know why this may be?
First, I would triple check that you have the NTRIP network information entered correctly and steady internet connection.
how can i setup msl height?
Please help! where can I get the configuration for my device?
tq sir
You will have to reach out to your CORS network provider to make an account and connect to their network. It's the same process a surveyor would use to connect a network rover. Depending on your location you may have to pay a subscription fee.
Lost me at 13 seconds. Set up an account with your network provider? Who is that? How do I get a network provider?
It will depend on where you live. You might need to subscribe to a NTRIP provider, or you state DOT may offer a free service.