If I get to many problems with the song I will delete the video and upload it without the song. I have done this many time before with no problems. I am only helping him by spreading his song around.
mossman381 It could 100% handle a 6 foot plow but when you get the storms of 6inches or less you should try it out, it would be a son to the 3500. but i love your videos and great job you have amazing and great looking plows and plow trucks keep up the great work!
It says it is active. I know on my tablet I sometimes get the message that it is not available for mobile devises but it still plays on my tablet anyway.
Not sure on the lift. When I got the truck it had I think a 2" body lift. I am not sure if the torsion bars were turned up or not. I think it is the same height as the ZR2 S10.
mossman381 oh ok im looking for taking the more inches i can without having to buy a new suspension kit,i'll do the 2" body lift and take some other inches from the wheels,what tires and wheels specs you got Really aprecciate the help
If you want all the specs you have to go to the video where I bought the rims. It's been too long for me to remember them. I have videos of everything that was done to this truck on a playlist in my channel. Here is the playlist with all the videos ruclips.net/p/PLZwy_pK9cqiNsjEjqI2SRpekJLgIY3fmQ
***** No rub on the frame or control arms but the tires do touch the rear of the fenders sometimes. Usually happens when I hit bumps or dips while turning.
I had 31" tires on this S10. Had to trim a very small amount to clear. You can go back to my wheel video and get all the specs on those. Don't remember off hand.
Congratulations you made a zr2 clone but with weaker axles, narrower axles, most likely smaller 4 wheel disk brakes, a weaker limited slip, and alot weaker frame. A factory zr2 came with 4 inch wider track, an 8.5" in the rear, a 7.5" in the front. A 3 inch factory suspension lift, 31x10.5 tires, 3.73 gears, 15" aluminium rims and a fully boxed frame, Etc, etc. It's a very long lift of improvements over a regular 4x4 s10. You did a nice build but you could have just sold your s10 and bought a zr2. Your 4x4 s10 looks almost exactly like my blacked out 2000 zr2 s10 4x4, but just a little smaller.
Wasn't trying to build a ZR2. I got the truck and it's was in good shape so I customized it. Project mini me is the name of the project because it's suppose to be a mini me of my blacked out Silverado 3500 dually.
mossman381 I understand but it probably would have been cheaper just to get the zr2 with all the upgrades. Though single cab zr2 s10s are hard to find. It's a good build, I'm not denying that. It just seems like a zr2 clone. It's your truck buddy build it how you want to. Personally I'm installing a aluminium block 5.3 (baby ls1) with a 70mm turbo because nothing I own should have less than 500rwhp. Both my 89 ws6 formula firebird and 02 ws6 Trans Am are done so now it's time fire the zr2 (4.3 is weak with the heavy zr2 plus I blew it up) then it's on to a 6.0 turbo swap in my 87 k5 blazer. Might solid axle swap the zr2 since it's easy to do also. Again it's a nice build. Like i said, it kind of looks like my ZR2 now.
a sonoma hood in the s10 would match the dully perfectly.
Not embarrashing anymore ! I wonder if Mr Moore will strike you ...
If I get to many problems with the song I will delete the video and upload it without the song. I have done this many time before with no problems. I am only helping him by spreading his song around.
exactly ! but some artists just don't understand how people learn about them.
truck looks amazing! :)
Thanks
mossman381 ur welcome. :)
MRJOHNDEERE3720 rock on
you had a lot of work with it, but it was worth it!
And I have to say: MRJOHNDEERE3720.:) is so right
Still not done with it yet :)
I'm looking at getting the same headlights.. were the hotspots the same or smaller at night with these aftermarket headlights compared to stock?
Nice looking truck!
Great job!
Thanks, need to get the bottom part sanded and bedliner sprayed on.
this truck is so nice great job! you should make a plow video with it next year and see how it handles the huge snow storms you guys get
It could probably handle a 6ft plow but I don't think I will put one on it.
mossman381 It could 100% handle a 6 foot plow but when you get the storms of 6inches or less you should try it out, it would be a son to the 3500. but i love your videos and great job you have amazing and great looking plows and plow trucks keep up the great work!
Thanks
hi what size tires and rims you have on your S10 truck
Check the playlist on this truck.
NICE!! JOB
Thanks
great work the truck looks amazing!!!! :)
Thanks
Love this truck!
It was fun to build.
The video was blocked for Copyright...
I added a song to this video. It might be blocked for people outside the US. I am sorry if that happened. That is stupid RUclips doing that not me.
Looks awesome... you could put a cowl scoop on the hood for a more aggressive look...
Now all you need is a little plow on that lol
Maybe down the road sometime :)
Need a head rack and tool box
Might build a back rack for it sometime.
Im in the US and im blocked :/ I will try it on my desktop later.
It says it is active. I know on my tablet I sometimes get the message that it is not available for mobile devises but it still plays on my tablet anyway.
Why didn't you clean up the rust ?
Keep going in the playlist and you will see me address the paint chipping.
Is it 4x4 or did you level it ?
4x4 with 2" body lift I think. Body lift was on the truck when I got it.
of the factory model how many inches did you lift the truck?,great job by the way
Not sure on the lift. When I got the truck it had I think a 2" body lift. I am not sure if the torsion bars were turned up or not. I think it is the same height as the ZR2 S10.
mossman381 oh ok im looking for taking the more inches i can without having to buy a new suspension kit,i'll do the 2" body lift and take some other inches from the wheels,what tires and wheels specs you got
Really aprecciate the help
If you want all the specs you have to go to the video where I bought the rims. It's been too long for me to remember them. I have videos of everything that was done to this truck on a playlist in my channel. Here is the playlist with all the videos ruclips.net/p/PLZwy_pK9cqiNsjEjqI2SRpekJLgIY3fmQ
do you have any aftermarket control arms, or is everything stock such as the control arms, the coil springs, and the spindles?
+Franco Duran This is a 4x4 so it has torsion bars. This truck had a 2" body lift I believe. It was on the truck when I got it.
Is it bad I thought it still looked good before too?
I think it looked better after but everybody has their own opinion.
do you have any rubbing problems on the control arms or frame? and nice truck! I have one like it
***** No rub on the frame or control arms but the tires do touch the rear of the fenders sometimes. Usually happens when I hit bumps or dips while turning.
If a 2 inch body lift was put on my stock 2001 s10 ls 4wd what would the biggest all terrain tire that would fit without scrubbing?
I had 31" tires on this S10. Had to trim a very small amount to clear. You can go back to my wheel video and get all the specs on those. Don't remember off hand.
mossman381 thanks
What head lights do u have and turn single ones as well
They are the black clear lights. Turn signals are also black LED. Got them on Ebay.
Congratulations you made a zr2 clone but with weaker axles, narrower axles, most likely smaller 4 wheel disk brakes, a weaker limited slip, and alot weaker frame. A factory zr2 came with 4 inch wider track, an 8.5" in the rear, a 7.5" in the front. A 3 inch factory suspension lift, 31x10.5 tires, 3.73 gears, 15" aluminium rims and a fully boxed frame, Etc, etc. It's a very long lift of improvements over a regular 4x4 s10. You did a nice build but you could have just sold your s10 and bought a zr2. Your 4x4 s10 looks almost exactly like my blacked out 2000 zr2 s10 4x4, but just a little smaller.
Wasn't trying to build a ZR2. I got the truck and it's was in good shape so I customized it. Project mini me is the name of the project because it's suppose to be a mini me of my blacked out Silverado 3500 dually.
mossman381 I understand but it probably would have been cheaper just to get the zr2 with all the upgrades. Though single cab zr2 s10s are hard to find. It's a good build, I'm not denying that. It just seems like a zr2 clone. It's your truck buddy build it how you want to. Personally I'm installing a aluminium block 5.3 (baby ls1) with a 70mm turbo because nothing I own should have less than 500rwhp. Both my 89 ws6 formula firebird and 02 ws6 Trans Am are done so now it's time fire the zr2 (4.3 is weak with the heavy zr2 plus I blew it up) then it's on to a 6.0 turbo swap in my 87 k5 blazer. Might solid axle swap the zr2 since it's easy to do also. Again it's a nice build. Like i said, it kind of looks like my ZR2 now.