It’s always refreshing seeing tools that have actually been used. So many of these channels are just new, box opening and that’s nice. But I wanna know how things hold up! Great setup guy!
Packout excels in drop and impact scenarios, but I think the plastic injection is not structurally rigid enough like the structural foam Dewalt uses for its tough system.
He's got a lot of power there please also got a lot of money sitting they're also that's what homeowners don't understand how much a professional spends money on their tools
At 7:25, they question whether the mid size box came with one tray, or two. My theory is the bottom box with wheels comes with a tray. It wasn’t being used there. Hence, it sits in the mid size box along with the tray that came with it. I’d do the same thing. Mystery solved.
Nice to see actual workers showing off theses things. Most of the videos on here are nerds that just keep it all in the garage and do diy horse shit around the house.
I dont see a reason using more then a 5.0 battery on the drills. They last forever. Super crazy how efficient the tools are. I do need to get a few 3.0 just to keep the weight down on the drills haha
My Packout is fairly simple: rolling box, XL box, and the Large box. This holds a remarkable amount of stuff. We use it for trade shows. Kinda thinking of getting another. I'd looked at every other platform. The Packout is built to a better standard.
Just picked up the M12 fuel recip with the 4.0 battery, charger and bag and it qualified for a free $89 M12 6.0 battery. I love that as I have many uses for a little recip, and I get another charger and 2 batteries that will work in my jackets, air compressor, ratchet and recip... Love that each purchase kind of upgrades your whole lineup. $179 I am happy happy
I’ve got 4 sets of Dewalt tough system with 4 bases 3 extra large boxes 2 medium sized boxes and 4 small boxes. I have my ryobi, rigid, Milwaukee, makita and Dewalt tools plus my hand tools. I got most of them for an awesome price.
The XC6 HO uses a slightly higher current cell in theory than the XC8 HO - maybe 10% higher power (1250+W vs 1100W), probably a little better than that for sustained high loads. It may be noticeable on the 12" miter saw, 7 1/4 circular saw, 2980 or bigger grinder, etc. For light to medium use on any tool, the extra capacity of the 8Ah should be more noticeable.
Yeah that box only comes with one of those organizers and the wheeled box comes with one. A lot of people take one from one box and put it in another so they have two in a box.
Tool Boss, That was a cool video on the packout and batteries. I agree with you milwaukee should make a (m18) 4 or 6 battery rapid charger station. What happen to Tony's m18 hackzall? He's using a m12, what going on, LOL... Tony, thanks for sharing. That man bleeds and sweats Red, LOL... He might hate me but i still like both my brand (Milwaukee and DeWalt). I'm happy i have both brand backing me up. Thanks for the video
Such a weird coincidence but I have my packout setup almost identical. Box with the handle has the two dividers in the top and is for all hand tools. Smaller box for batteries. Wheel box for power tools. Great minds think alike!
Charger- A small, low profile 1/2 size foot print rapid charger with cord storage that had 1x 12v port and 2x 18v ports would be great. ***Milwaukee also needs to make a packout VAC in a small/ medium size box and quiet like the festool vac that is both battery and 120v and the hose/ attachments are all self contained. I use my 0880 M18 Vac daily but have to bungee it to my packout since there is not other way to attach it.
@@lgzz4885 yeah I would love to have one. But the import tax is unbelievable. I think it's just as much if not more than the cost of the pack out. One could get linex or rhino liner for the same price maybe cheaper. That would he pretty legit.
JP yeah dude that’s a crazy tax!? I looked into it 1.5 years ago right be4 I copped the red!? Loco... but now you can nab one in the states for “standard” price w/o those crazy import tax’s/shipping. I’ll see one every once an a while on eBay/amazon or somewhere. But just do us up with red/black in different color schemes that would be dope! You could get logo on it prob 3rd party not to bad in price. I know a “sign” guy I’m gunna ask him next time I see him
@@lgzz4885 that's funny you mentioned a "sign guy" because brother in law works for Welborn here in Lubbock. Hes done some cnc cut-outs of some different things. It was in an aluminum alloy that is very light weight and retains the scratch resistance from the other metals. But yeah no problem adding that stuff ourselves. To be Honest I considered a colored linex or similar material. Give it a unique color
Tool Boss, I forgot to mention. Can't wait to see a 5.0ah compact with 21700 cell. Like the 3.0ah. Also you mention that maybe the 9.0ah might be ending. It would be nice to see a 10.0ah with 21700 cell for all the outdoor equipment. Just my thoughts
Nice set up man. Definitely advertising for Milwaukee there other than those Walmart wrenches lol. My set up is advertising for Harbor Freight so no shame there.
That M18 Fuel SDS rotary hammer is the shit man. I've drilled thru a solid concrete wall (all the buildings here in my area are concrete) with a 1" x 10" bit and it went thru it like nothing with charge to spare. Actually I was using it to drill a shitload of 5/32 holes for the 3/16 tapcons
This video makes me want two 8.0 high output batteries, not that I have any issue with the 5.0 xc batteries on my gen 3 hammer drill and impact, just would be nice for added runtime. The only thing about the packout for me is I don't like stacking tools in the big roller toolbox, I have most of my tools in packout boxes with foam inserts. I like keeping my tool in good condition.
Just ordered my Packout this morning from ToolBarn. Rolling box=$89 and large box=$59. No shipping/no tax. Already own the top box and have a gaggle of compact organizers. Where's the best place to buy Kaizen Foam?
I just ordered (4) 2'x4" sheets of 57mm from Fast Cap- ($26.40 each) with free shipping over $100. This was the best deal I could find. You are already cutting the foam, so might as well make a template and cut the insets as well.
@@jayshawver2603 Thanks Boss and Jay. Woodcraft has it also for a few bucks less than FastCap, but they charge an "Additional Shipping Fee"... AKA, Deal Breaker. I went back to FastCap's site and have my set of foam sheets loaded in my shopping cart. Thanks again.
When I first thought about buying the charger I didn't like the idea that it only charged One battery at a time so I had a couple of single charges but the problem is you have to watch so you can change out batteries with the six pack battery charger you just throw all your batteries on and you don't have to worry about it because it just goes from One battery to the next so you can work do what you have to do when your battery dies you just run upstairs and grab one because there's no worries it just jumps to the next battery and charge it for you
Haven't found the video yet but I'm watching it on my TV about the true blue floodlight they just sold out at International tool $449 with a free 5 amp hour battery I was watching your video and wanted to go see let me know when you find another good hack looks like a great light
I am surprised that the packout and other companies haven't figured out how to add the chargers......Flex has something but I am surprised that the rest have fallen asleep at the wheel.
Word that’s a dope little setup! Yeah the medium pack is awsome I use that & usually leave my rolling case at the house for space reasons, so I can throw the chop/stand/TS in the back. In it I have 5xscrew guns, hackzall, hole saws, orbital, router, multitool, chalk line, bags of sandpaper, just a bunch of other small shit “packing” 😉 that thing the F out! My Circ just sits next to it & keeps my water cooler upright lol I love the packout BUT it’s over priced imo. The same case w/o packout is like 1/2 the price & the rigid & Dewalt cases are much less expensive per case. I have about 10 PO cases atm but only buy them when they drop in price. I wanted the 10” tote this year but after tax is almost 100 on sale!? That’s extreme.... 8 ah best all around battery for sure I couldn’t agree more! I use the 12s for my big lights & lots of ripping.
Amazing how Elon Musk and Tesla have influenced multiple industries. Early on, they pushed for using common 18650 laptop batteries for their cars and it worked. Advancements continue from 18650 to 21700 to 4680 to pouch, etc. The tools of our trades continue to benefit as well.
Clever idea, I have the M12/M18 rapid charge station (48-59-1807) it's a bit larger and I have a couple of ideas on making it lock on to my PACKOUT system
High Output 6.0 has higher discharge than 12A and 8Ah Samsung 30T has a 40-50 amp discharge rate while the 8Ah and 12Ah use Samsung 40T barely meet 30 amp
Yes, had I been more patient I would have heard it. But even with 3 charging at once, seems to be the best alternative to the 6 sequential unless you are charging over night. But at the site, rapid is rapid, and 3 vice 1. But yes you definitely did mention it in the video. I should have watched for a moment longer. Thanks
Love the pack out I like that little sequential charger hack that's a great idea thanks for the input look forward to that with my two packouts come in but a question for the regular person that's not using them every day I like to work on cars when I'm not cutting trees it's ask Winchell really worth having or is it just better to have a regular charger
Wifi symbol is for the One Key tools. Rigid has the Bluetooth function and app in all octane's. Milwaukee is going to have to give up on their original one-key vision of charging all that they'd easily amortize the costs of making it in every fuel tool just in the scale savings. Gotta imagine that's coming. I always wonder if that's Milwaukee or TTI, I can only imagine it's Milwaukee since AEG uses the rigid model even in regions where aeg is the premium tti offering
TOOL BOSS that’s just speculation, it seemed like a waste to do nothing with it, last I heard the only answer Milwaukee was giving was that it was strictly a tool to aid in assembly line efficiency. I don’t doubt that, it’s just hard to imagine they wouldn’t make use of something that’s there already so I always figured they’d at least tie it into one key and give you a way to lock individual batteries or something at least. Got a $50 bet with a “self taught Carpenter” 😑 that he never be able to use his battery as a Wi-Fi Hotspot to watch porn and reduce jobsite related porn watching injuries. Few ppl are so stupid but also so funny
. Just noticed that all of the lids on your pack-out modules open all the way vertical against the handle, while attached to the rolling base unit. None of the lids on mine will do that, and stay up and open. What's up with that?!
Warped you get what you pay for lol.i could not justify 200 so I went with the dewalt wish was 96 dollars on Black Friday it's perfect for a do it yourselfer
@@76kamikazi I got it figured out. You just unlatch the accessory box, slide it forward on the pucks, and then the lid opens fully. When I went to HD on Black Friday, I intended to get the DeWALT or Ridgid packout set-up, but once I got to see them and wheel them around for a while, I decided that the handles were too cheaply built and flimsy for my use. Yes, if you never intend to subject the DeWALT and Ridgid to rough treatment, they will be just fine for consumer/DIYer use (and you save ~$100 over shelling out for the Milwaukee rig). I saved $80, since the Milwaukee went back up to $280. I'm happy, you're happy, ...everybody is happy!
@@toolboss8410 Hey man thanks for the reply, that's exactly what I was implying with your comment. They have some that discharge at 12-15 that discharge upto 4800. That's what I meant with the term "stable" it's pretty neat stuff though man. Please keep up the content, even though I can barely use half your deals in Canada :)
It’s always refreshing seeing tools that have actually been used. So many of these channels are just new, box opening and that’s nice. But I wanna know how things hold up! Great setup guy!
👍👍👍👌👌
They need a pack out with drawers so you don’t need to take it on and off each time for commonly-used tools or fasteners
🤘👍👍💪
Milwaukee must have read this comment with the new drawers coming out
Packout excels in drop and impact scenarios, but I think the plastic injection is not structurally rigid enough like the structural foam Dewalt uses for its tough system.
You got your wish....
They're coming
If you face the battery life gauge up on the 5.0 or smaller battery you can fit way more in the smaller packout and you can check the life on them
Wish Milwaukee would make the rolling case with, instead of a drawer, a pivot out bin. Hinged at bottom so you can access box when stacked. Nailed it!
He's got a lot of power there please also got a lot of money sitting they're also that's what homeowners don't understand how much a professional spends money on their tools
At 7:25, they question whether the mid size box came with one tray, or two. My theory is the bottom box with wheels comes with a tray. It wasn’t being used there. Hence, it sits in the mid size box along with the tray that came with it. I’d do the same thing. Mystery solved.
Nice to see actual workers showing off theses things. Most of the videos on here are nerds that just keep it all in the garage and do diy horse shit around the house.
I dont see a reason using more then a 5.0 battery on the drills. They last forever. Super crazy how efficient the tools are. I do need to get a few 3.0 just to keep the weight down on the drills haha
My Packout is fairly simple: rolling box, XL box, and the Large box. This holds a remarkable amount of stuff. We use it for trade shows. Kinda thinking of getting another. I'd looked at every other platform. The Packout is built to a better standard.
I love my pack out. I would definitely recommend this and possibly purchase a second pack out.
I jus bought my 2nd packout set today I love them!! Gonna replace the wheels on them with more durable rubber wheels and custom bit trays for it
Just picked up the M12 fuel recip with the 4.0 battery, charger and bag and it qualified for a free $89 M12 6.0 battery. I love that as I have many uses for a little recip, and I get another charger and 2 batteries that will work in my jackets, air compressor, ratchet and recip... Love that each purchase kind of upgrades your whole lineup. $179 I am happy happy
I’ve got 4 sets of Dewalt tough system with 4 bases 3 extra large boxes 2 medium sized boxes and 4 small boxes. I have my ryobi, rigid, Milwaukee, makita and Dewalt tools plus my hand tools. I got most of them for an awesome price.
The XC6 HO uses a slightly higher current cell in theory than the XC8 HO - maybe 10% higher power (1250+W vs 1100W), probably a little better than that for sustained high loads. It may be noticeable on the 12" miter saw, 7 1/4 circular saw, 2980 or bigger grinder, etc. For light to medium use on any tool, the extra capacity of the 8Ah should be more noticeable.
I love my packout set. I put kaizen foams on the mid size and small. The bottom one I have bags.
My med tote came with one top holder and my roller came with one I combined both into my mid tote! Thank you guys for sharing
Yeah that box only comes with one of those organizers and the wheeled box comes with one. A lot of people take one from one box and put it in another so they have two in a box.
Yes I thought so 👍👍👌🤟
That’s an awesome idea though with the six pack charger. I think I’m going to do that
Love the battery setup in the packout👍🏻. Cool idea for the charging station as well.....
Gotta love the packouts😊
👊👊😉👌
Great Work bro 👍👍👍👍👍✌✌✌✌✌
✊✊✊✊✊✊✊💪💪💪💪💪
I’m a HVACR tech and I love my packout system
Slowly building it up
I got the same box and double sided tape the same charger to the lid and you can use the box as intended. Works great.
They already have preset holes in the lid for Milwaukee charges
Drywallers here too. Hundreds of thousands of screws through my Milwaukee guns too.
Man the vid was awesome with all the battery comparisons!!!
👍👍👌🤟
If you look at the torque test channel they provide that the 1/2 inch impact benefits more form the 6amp battery than the 8amp battery!
Surge is great. I got one for when I'm working indoors it will save your ears
👍👍🤟🤟
Tool Boss,
That was a cool video on the packout and batteries. I agree with you milwaukee should make a (m18) 4 or 6 battery rapid charger station.
What happen to Tony's m18 hackzall? He's using a m12, what going on, LOL...
Tony, thanks for sharing. That man bleeds and sweats Red, LOL...
He might hate me but i still like both my brand (Milwaukee and DeWalt). I'm happy i have both brand backing me up.
Thanks for the video
👍👍👍👌🙏
Such a weird coincidence but I have my packout setup almost identical. Box with the handle has the two dividers in the top and is for all hand tools. Smaller box for batteries. Wheel box for power tools. Great minds think alike!
Charger- A small, low profile 1/2 size foot print rapid charger with cord storage that had 1x 12v port and 2x 18v ports would be great.
***Milwaukee also needs to make a packout VAC in a small/ medium size box and quiet like the festool vac that is both battery and 120v and the hose/ attachments are all self contained. I use my 0880 M18 Vac daily but have to bungee it to my packout since there is not other way to attach it.
👌👌👍🤟👊
They did come out with with the packout radio recently which i believe can charge batteries.
Indeed it can ..not out yet tho ..very soon tho
They need custom colors / company logo / integrated low profile interior led lighting. And a pack out security suite
That would be awsome! They have the blacked out version in Europe kinda 🔥
@@lgzz4885 yeah I would love to have one. But the import tax is unbelievable. I think it's just as much if not more than the cost of the pack out. One could get linex or rhino liner for the same price maybe cheaper. That would he pretty legit.
JP yeah dude that’s a crazy tax!? I looked into it 1.5 years ago right be4 I copped the red!? Loco... but now you can nab one in the states for “standard” price w/o those crazy import tax’s/shipping. I’ll see one every once an a while on eBay/amazon or somewhere. But just do us up with red/black in different color schemes that would be dope! You could get logo on it prob 3rd party not to bad in price. I know a “sign” guy I’m gunna ask him next time I see him
@@lgzz4885 that's funny you mentioned a "sign guy" because brother in law works for Welborn here in Lubbock. Hes done some cnc cut-outs of some different things. It was in an aluminum alloy that is very light weight and retains the scratch resistance from the other metals. But yeah no problem adding that stuff ourselves. To be Honest I considered a colored linex or similar material. Give it a unique color
Tool Boss,
I forgot to mention. Can't wait to see a 5.0ah compact with 21700 cell. Like the 3.0ah. Also you mention that maybe the 9.0ah might be ending. It would be nice to see a 10.0ah with 21700 cell for all the outdoor equipment.
Just my thoughts
4:10 If you stack the high outputs vertically rather than on there sides, you can get 20 in easily
I love the battery packout that he made
That's a great setup, a lot of money invested.
👌👌👌👍👍
7:10 my local rural king sells that large box for $79 online but it’s only $59 in store picked up another one today.
Nice set up man. Definitely advertising for Milwaukee there other than those Walmart wrenches lol. My set up is advertising for Harbor Freight so no shame there.
🤟🤟👍👍👌
I did notice the large box comes with one tray, but mine also came with two trays.✌🏼
I was just about to say Milwaukee might copy this idea this guy was really smart to do this
That M18 Fuel SDS rotary hammer is the shit man. I've drilled thru a solid concrete wall (all the buildings here in my area are concrete) with a 1" x 10" bit and it went thru it like nothing with charge to spare. Actually I was using it to drill a shitload of 5/32 holes for the 3/16 tapcons
This video makes me want two 8.0 high output batteries, not that I have any issue with the 5.0 xc batteries on my gen 3 hammer drill and impact, just would be nice for added runtime. The only thing about the packout for me is I don't like stacking tools in the big roller toolbox, I have most of my tools in packout boxes with foam inserts. I like keeping my tool in good condition.
Just ordered my Packout this morning from ToolBarn. Rolling box=$89 and large box=$59. No shipping/no tax. Already own the top box and have a gaggle of compact organizers. Where's the best place to buy Kaizen Foam?
I think directly from them buddy
I just ordered (4) 2'x4" sheets of 57mm from Fast Cap- ($26.40 each) with free shipping over $100. This was the best deal I could find. You are already cutting the foam, so might as well make a template and cut the insets as well.
@@jayshawver2603 Thanks Boss and Jay. Woodcraft has it also for a few bucks less than FastCap, but they charge an "Additional Shipping Fee"... AKA, Deal Breaker. I went back to FastCap's site and have my set of foam sheets loaded in my shopping cart. Thanks again.
When I first thought about buying the charger I didn't like the idea that it only charged One battery at a time so I had a couple of single charges but the problem is you have to watch so you can change out batteries with the six pack battery charger you just throw all your batteries on and you don't have to worry about it because it just goes from One battery to the next so you can work do what you have to do when your battery dies you just run upstairs and grab one because there's no worries it just jumps to the next battery and charge it for you
They should make a packout shop vac
Hope they do that would be sweet
Comes out in october $199
I just got the pack out vac it’s awesome !
Bro your pack our and tools are so clean
Haven't found the video yet but I'm watching it on my TV about the true blue floodlight they just sold out at International tool $449 with a free 5 amp hour battery I was watching your video and wanted to go see let me know when you find another good hack looks like a great light
👌👌👊😉
I love you guys. You sound like you would be fun to work with. Love the video too. Your set up is what I need.
Fyi the big one has a tray and the medium has one to so he took both trays and put in one box
I am surprised that the packout and other companies haven't figured out how to add the chargers......Flex has something but I am surprised that the rest have fallen asleep at the wheel.
Ive said they should even make a packout router table. But often wonder how far theyll take this
They do have a charger part of the pack out it’s the charger radio combo
Has anybody ever had a problem with the rolling tool box leaking .I leave my packout boxes on my truck.this is the only one that leaked
Is there a video on the foam insert for the batteries? I like that idea
Word that’s a dope little setup! Yeah the medium pack is awsome I use that & usually leave my rolling case at the house for space reasons, so I can throw the chop/stand/TS in the back. In it I have 5xscrew guns, hackzall, hole saws, orbital, router, multitool, chalk line, bags of sandpaper, just a bunch of other small shit “packing” 😉 that thing the F out! My Circ just sits next to it & keeps my water cooler upright lol I love the packout BUT it’s over priced imo. The same case w/o packout is like 1/2 the price & the rigid & Dewalt cases are much less expensive per case. I have about 10 PO cases atm but only buy them when they drop in price. I wanted the 10” tote this year but after tax is almost 100 on sale!? That’s extreme.... 8 ah best all around battery for sure I couldn’t agree more! I use the 12s for my big lights & lots of ripping.
Awesome video. Thanks Tony!
👍👍👌🤟
Milwaukee should pay your buddy as a advertisement for them.
👌🤟🤟👍😉
Nice set up!!! Great Vid Boss Man!!!!
👌👌👌🤟👍
He got the second black tray in his large tool box from the rolling tool chest. The chest comes with one.
Amazing how Elon Musk and Tesla have influenced multiple industries. Early on, they pushed for using common 18650 laptop batteries for their cars and it worked. Advancements continue from 18650 to 21700 to 4680 to pouch, etc. The tools of our trades continue to benefit as well.
Clever idea, I have the M12/M18 rapid charge station (48-59-1807) it's a bit larger and I have a couple of ideas on making it lock on to my PACKOUT system
🤟🤟👌✌️👊
🤟🏽✌🏽🤜🏽💥🤛🏽🖖🏽
@@jasonbabila6006 👌👌👍🙏🙏
Great idea! Thanks for sharing.
👌👌🤟🤟👊
My surge and drywall gun are my money makers too! 👍
High Output 6.0 has higher discharge than 12A and 8Ah
Samsung 30T has a 40-50 amp discharge rate
while the 8Ah and 12Ah use Samsung 40T barely meet 30 amp
This is awesome set of Milwaukee tools) I want
👍👍👍🤟👊
They have the rapid charger but it isn't sequential. 3 at a time
Yup I mentioned that in vid 👌👍
Yes, had I been more patient I would have heard it. But even with 3 charging at once, seems to be the best alternative to the 6 sequential unless you are charging over night. But at the site, rapid is rapid, and 3 vice 1. But yes you definitely did mention it in the video. I should have watched for a moment longer. Thanks
@@mariochavez3212 no prob Mario ..yea it's tough choice u can make a case for both
My dad has been using the same hite screw gun for 18 years
Love the pack out I like that little sequential charger hack that's a great idea thanks for the input look forward to that with my two packouts come in but a question for the regular person that's not using them every day I like to work on cars when I'm not cutting trees it's ask Winchell really worth having or is it just better to have a regular charger
🤟🤟✌️👊🙏🙏
3D printing would be great for a more permanent solution
Gotta say the only thing I don’t like from my Milwaukee drill is the collet and the belt clip
Tool boss one of thos containers gose in the bottom they just put both in one
Yea makes sense...we looked at depot only had one 👌
Fantastic!
Yep Milwaukee should go all in on the packout, and make 199 be the regular price point. They would sell the 💩 out of those things
Rob Spruk They’re selling the 💩out of them already.
Any advice on the large trays that come with the pack out being junk. Both of mine broke, way too easy.
Yes 🗣🗣🗣🗣🗣🗣 Sir .....Great Tools Video bro 👍👍👍👍👍👍✌✌✌✌✌✌💪💪💪💪✊✊✊✊✊Thank
The vac would be good as well a charger totally agree they need more thing packout
Wifi symbol is for the One Key tools. Rigid has the Bluetooth function and app in all octane's. Milwaukee is going to have to give up on their original one-key vision of charging all that they'd easily amortize the costs of making it in every fuel tool just in the scale savings. Gotta imagine that's coming. I always wonder if that's Milwaukee or TTI, I can only imagine it's Milwaukee since AEG uses the rigid model even in regions where aeg is the premium tti offering
For one key tools ?? Not sure in what way . That isn't what reps told us at NPS 18 ..
TOOL BOSS that’s just speculation, it seemed like a waste to do nothing with it, last I heard the only answer Milwaukee was giving was that it was strictly a tool to aid in assembly line efficiency. I don’t doubt that, it’s just hard to imagine they wouldn’t make use of something that’s there already so I always figured they’d at least tie it into one key and give you a way to lock individual batteries or something at least.
Got a $50 bet with a “self taught Carpenter” 😑 that he never be able to use his battery as a Wi-Fi Hotspot to watch porn and reduce jobsite related porn watching injuries. Few ppl are so stupid but also so funny
Thank you 👍
Home Depot has a special going buy the rocket light for $199 and you get a free battery and charger 169 dollar value free
I got 1 on The Super Sawall and the Large Circular saw
Thank you Tony.
👍👍👍👊
The light with the USB is pretty awesome.Have you charged a phone with it yet?
.
Just noticed that all of the lids on your pack-out modules open all the way vertical against the handle, while attached to the rolling base unit. None of the lids on mine will do that, and stay up and open.
What's up with that?!
Warped I wonder the same thing
Warped you get what you pay for lol.i could not justify 200 so I went with the dewalt wish was 96 dollars on Black Friday it's perfect for a do it yourselfer
@@76kamikazi
I got it figured out. You just unlatch the accessory box, slide it forward on the pucks, and then the lid opens fully.
When I went to HD on Black Friday, I intended to get the DeWALT or Ridgid packout set-up, but once I got to see them and wheel them around for a while, I decided that the handles were too cheaply built and flimsy for my use. Yes, if you never intend to subject the DeWALT and Ridgid to rough treatment, they will be just fine for consumer/DIYer use (and you save ~$100 over shelling out for the Milwaukee rig). I saved $80, since the Milwaukee went back up to $280. I'm happy, you're happy, ...everybody is happy!
I Love my Packout!
🤙🤙👌👍
Would the large box with the handle hold a cordless circular saw on one side and say the charger and 4 batteries on the other side?
they have a packout charger mow
Where did you get the black trays that sit inside of the big box? I need a couple of them asap
Can you make a pack our for the Milwaukee vacuum 😜
i think this is my forth time watching this one
Keep in mind there is 15, 18650’ cells in that 9.0A.H.
The 8.0A.H. H.O. Has 10, 21700 cells in it.
Great Video!!!!!!!!
🤟👍👌
They are on the verge of creating stable 21700 Cells that are 5000 mAh. We are going to see a High Output XC 10.0 battery before 2021.
I believe they have 5000mah out for a while but problem is only 10 amp
@@toolboss8410 Hey man thanks for the reply, that's exactly what I was implying with your comment. They have some that discharge at 12-15 that discharge upto 4800. That's what I meant with the term "stable" it's pretty neat stuff though man. Please keep up the content, even though I can barely use half your deals in Canada :)
@@Shmankafy lolol... thanks brother I appreciate the comment ..yes very cool what's going on with the technology
Tool Boss youre doing good tools review. Just keep it short.
Can someone please explain the difference between the red packout and the black packout system
Where is the date on the m18 and m12 batteries?
What i hate is the 8 not fitting in my cordless vacuum 😒
Awesome 👍 idea.. I'm on that.. nice..
As a ryobi user I want these so badly
I have that light. It's awesome!!!
What the #
Oh I’m sure the chargers are coming. They care about what they do so they take the time to do it right.
That's sweet right there
🙏✌️✌️👍
So much testosterone flowing through this video
Well done!!
✌️👊😉🤟👌