Your shop did a great job installing the liftgate looks perfect from the video the deck is right on. I know this is my personal pet peeve is the switch for the liftgate for me personally I would’ve had it mounted sideways so don’t face up for the rain and bad weather I know it’s a weatherproof switch but that’s is me personal. Not that wrong the way it’s installed . Keep up the great videos👍👍👍👍👍👍👍👍
Great video Todd. Do me a favor and tell Mr. Dirt Perfect what "music" was playing in the background portion of the time lapse, SO HE NEVER USES THAT ! Where did you get that stuff?
Does Kentucky have laws where a truck does not need 'back-up' lights? The fixtures you had mounted don't have them. I thought that was a DOT requirement. What model gate is that?
Don GREAT QUESTION!!! The backup lights are LED and built into the backup lights. They are hard to see but they are their. In Kentucky shoes and backup lights not required. Lol just joking. That is a M16ET.
Hey David sorry just saw this. Yes you can put this on a military vehicle. One problem is most military vehicles are 24 Volt. We would have to swap the motor of convert from 24 to 12 volt.
Great Question James!! We just disconnect the positive and negative on the battery. So we pretty much remove the battery. We do not touch the Moduels/ECU or TCU. We used to but it caused a few issues going that far. So just disconnecting the battery works great. Thanks for the question.
Sorry for the delay. We got locked out of our account. Love your name. A complete undercarriage for this size machine runs $15 to $20,000.00. If you any more questions please let me know
Right off the bat, they screw up on the deck and pocket placement. Looks like crap. Thats why I will not hire anyone to install equipment on my trucks, you get people that measure wrong then fill in with odd pcs to make up for the mistake so every time you load something, your reminded of how much your paid to have it look unprofessionally done. If that was my truck, I would make them replace the deck they miscut around the stake pocket and put non diamond plate pcs that dont match.. Thats just shade tree quality that would not fly with me.
@@TruckorTrack You’ve been quite clear when Dirt Perfect is there that you don’t “work” so it’d be a shame that you get caught “working” on your own videos. Thieman tailgates are great. We had them on the propane trucks I drove in the 80’s and 90’s but they weren’t the fold away type but the under frame section was basically the same.
Hey Artie sorry for the delay on the reply. I had a password issue. That is a Thieman M16ET 84x36+6 single cylinder stow away, Power Up Gravity Down with the LED lights. Need anything else please let me know.
Uncle Tony says he wants to know if you are a Theiman Parts & Tech distributor , we have a (re-purposed) Ameri-gas Truck with IMT /Theiman /Reading combined on same unit spec.ed by Ameri-gas ,
Hey Bonnie. Our sister company IMPCO is a full line Theiman dealer. Call 800-531-5689 and parts will take care of anything you may need. Thanks for watching.
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
Man I just love those plasma cutters. It makes working so much easier. Good work guys.
I love watching the plasma cut. Aaron makes it look easy. Thanks for watching Fredrick.
Your shop did a great job installing the liftgate looks perfect from the video the deck is right on. I know this is my personal pet peeve is the switch for the liftgate for me personally I would’ve had it mounted sideways so don’t face up for the rain and bad weather I know it’s a weatherproof switch but that’s is me personal. Not that wrong the way it’s installed . Keep up the great videos👍👍👍👍👍👍👍👍
I agree with you Stash. I prefer the in cab option and we have put them in the tool box before as well. Keep Watching.
Thanks for sharing
Hey Frank. Thank you for watching!!
So early Todd isn’t even out of bed yet I bet. 😂😂
Lol!! I’m still in my slippers.
@@TruckorTrack psh I bet! Hey it’s not easy being you though right 😂😂 some of us have been at work for atleast 7 hours by now you know
Lol!! I dressed now and working.
Loved the video Todd keep it up
Thanks Han!!
Nice work guy's!!
Thanks Clayton!!
nice job guys
Great video Todd. Do me a favor and tell Mr. Dirt Perfect what "music" was playing in the background portion of the time lapse, SO HE NEVER USES THAT ! Where did you get that stuff?
Lol!! It comes with the editing software. We have to be careful with what we use so we don’t get into trouble. I will pass that along to old Dirt tho.
Does Kentucky have laws where a truck does not need 'back-up' lights? The fixtures you had mounted don't have them. I thought that was a DOT requirement. What model gate is that?
Don GREAT QUESTION!!! The backup lights are LED and built into the backup lights. They are hard to see but they are their. In Kentucky shoes and backup lights not required. Lol just joking. That is a M16ET.
Good job. Do you think you could put one on a Duce and a Half Military Truck?
Hey David sorry just saw this. Yes you can put this on a military vehicle. One problem is most military vehicles are 24 Volt. We would have to swap the motor of convert from 24 to 12 volt.
Thanks for watching!!!!
Do you disconnect the batteries and modules be for welding on the trucks?
Great Question James!! We just disconnect the positive and negative on the battery. So we pretty much remove the battery. We do not touch the Moduels/ECU or TCU. We used to but it caused a few issues going that far. So just disconnecting the battery works great. Thanks for the question.
Where are the Truck or Track tee shirts at
Man Curt we are working on those. Send me a email @ info@truckortrack.com will take care of you. Thanks for watching!!
How much does something like this cost to install?
Sorry for the delay. We got locked out of our account. Love your name. A complete undercarriage for this size machine runs $15 to $20,000.00. If you any more questions please let me know
Right off the bat, they screw up on the deck and pocket placement. Looks like crap. Thats why I will not hire anyone to install equipment on my trucks, you get people that measure wrong then fill in with odd pcs to make up for the mistake so every time you load something, your reminded of how much your paid to have it look unprofessionally done. If that was my truck, I would make them replace the deck they miscut around the stake pocket and put non diamond plate pcs that dont match.. Thats just shade tree quality that would not fly with me.
Be careful Todd. It looks like you came real close to working at the end and risked getting your hands dirty operating the Theiman tailgate.
Hey Wayne. Sorry for the slow reply. Your right I need to be careful so I don’t get dirty. Lol Thanks for watching.
@@TruckorTrack
You’ve been quite clear when Dirt Perfect is there that you don’t “work” so it’d be a shame that you get caught “working” on your own videos.
Thieman tailgates are great. We had them on the propane trucks I drove in the 80’s and 90’s but they weren’t the fold away type but the under frame section was basically the same.
Hello, What model # is the lift gate that you used?
Hey Artie sorry for the delay on the reply. I had a password issue. That is a Thieman M16ET 84x36+6 single cylinder stow away, Power Up Gravity Down with the LED lights. Need anything else please let me know.
Uncle Tony says he wants to know if you are a Theiman Parts & Tech distributor , we have a (re-purposed) Ameri-gas Truck with IMT /Theiman /Reading combined on same unit spec.ed by Ameri-gas ,
Nice install !👍🏻
Hey Bonnie. Our sister company IMPCO is a full line Theiman dealer. Call 800-531-5689 and parts will take care of anything you may need. Thanks for watching.
Thank You!!!
Made in my home town .now can you say the city name right ? Lol
You live in Celina!?!? No I don’t say the name right. Lol!! Thieman rep stopped here today. Small world.
i think it needs axe handle tested lol. cool now i need to buy a truck so i can buy one of those lol
Lol!! I love hitting things with that Axe Handle Joe. I need to do a new Axe review. Stay tuned and thanks for watching!!
Hey todd check with the scrap and pallet man on RUclips he looking for a lift gate maybe you can help him out
Hey Polar Bear!! Will do and thanks for watching.