Cool tools your selling! I'm certain many people may buy them! I'm always broke without money, IRS Child support stuff, but I still send support best I can by sending support as in inviting my friends to your channel & hopefully they'll like your stuff! Cheers / Skáld Sir, if I said to you that your brilliant & should be appreciated for carrying the legacy of carpenters NOBLE deeds & labors, that many should learn if possible I believe, because it's a honest craft & honest good labors that the world never lost & I pray to God Almighty never does lose... One of my biggest passions is carpentry & my most favorite thing to do.. well I gtg going, just wanted to update you all & notify you that you have another friend / carpenter buddy who appreciates the wood working crafts in life, sharing that in common & your videos good Sir. Thank you. Sincerely, ~Paul
Great video: another advantage of gang cutting is that you only have tearout on the back piece, as all the pieces in front of it have support on the push stroke (assuming you are using a western-style saw). Most Dovetail saws don't leave too much tear out, but it's nice to have one less thing to worry about. Also, if speed is a factor, you can use a more aggressive joinery saw and make sure the back piece is either the inside of a drawer or sacrificial.
Hi Mate - When there's snow on the ground and the workshop is freezing what better way to spend an hour - or two watching your videos. You make me smile every time. Great ideas but I'm a bit old fashioned, I prefer to work free of jigs - heck I don't always measure my dovetails. I kinda like the rustic look - but accurate. Great vid again really enjoyed it - Regards Dave
That last tip is great. Something you pick up for yourself after five years of struggling, but good to hear now. Thanks, Matt. And... oi... controversial indeed!
I revisited your video today .Your tips are great as I stated earlier. I cut a lot of dovetails since then but as hard as I tried, occasionally there was an issue. So I thought about what was missing in my technique and in reality I was not spending as much time as needed to make sure all components were square, flat, without twist and straight, consistent thickness. I do most of my stock milling by hand so it's a bit harder I think, than by machine. Since adding this "quality control" to my technique, things have improved a bunch. Thanks for your video.
This is awesome. I went to a woodworking school, and have experience cutting dovetail; but there are several tips within this that I have never heard of. Excited to try them out!
Literally cut some tails last night for a drawer and thought about "gang" cutting simply for the sake of saving time. I thought it might actually make my cuts less accurate so i just went back and cut em one board at a time. Definitely gonna try it next time and see if i get better results.
Matt - Can you please make a video showing how to make the wooden dovetail guides seen in the beginning of this video? Would love to make a set like that for myself to use...
Will use all these besides for the dovetail guide. Also, on tip 5, i just strop the chisel a few times between use. Good video matt, always look forward to your content.
Some really cool tips. Definitely a great tip on the end of sharpening before you do the finish pairing at the end for multiple dovetails. Will definitely have to try these out once i start doing some doves!
Couple there that I had thought of but it's good to have them endorsed by a pro. One thing I did think of, for an absolute beginner with only a cheap old coping saw that can barely get into the slots created by the nice new Japanese pull-saw, how about doing a third cut down the middle of the waste between the pins/tails using my old rusty B&Q tenon saw and then cutting left and right from that with the coping saw? As I see it, that means there's no danger of buggering up the edge of the pin/tail while getting the coping saw to make the vertical to horizontal turn. Obviously there's an extra saw cut to be made but it seems safer for a beginner with less than the ideal tools for the job. Do you have any thoughts on this?
Thanks for the tips Matt. I haven't seen or heard of these before. I really appreciate it. By the way I've been binge watching your videos. You do a great job with editing and there's always great take aways and things to learn. You have a new sub!
A few questions I have about dovetails is how short in height and wide can they be before they act like a finger joint, break off or as a wedge and break/split the wood and how effective would they be? Essentially what is the length limit for dovetails?,Can you reinforce them by during a hole across and put a dowel through the cross section?
Hi Matt. Another great video, many thanks. I have been following you for a while and have been amazed how you seem to be able to do things "reverse hand", so now the truth is out!! You're ambidextrous!! Blimey, amazing. I'd give my right arm to be ambidextrous!! Keep up the good work and keep the videos coming. Best Regards Rich
Watching your video makes me want to go out into the garage and start practicing dovetails! I'm still waiting for my chisels to come in, it's surprisingly hard to find actual bevel edge chisels for some reason.
Well,@@Devon.Martin I wish I could say it was going well, but I have yet to cut a single one. Life has been pretty busy/complicated the last few years and I've not really had any shop time until just recently. I've been working on some much-needed household projects prepping for a baby. Now spending some time figuring out schedules and hopefully getting him to sleep regularly so I can find some time back in the shop. I have a few projects to work on to get my channel back up and running, but fully plan to have some dovetail practice in the near future. Wow three years flies by.
@@TheEveryMaker I’m in the same boat as you with a newborn and woodworking. I’ll follow you on Instagram and wait for those first dovetails to pop up one day.
True story about the Katz-Moses Dovetail Jig. I never cut a single dovetail, bought the jig and cut about B- quality dovetails. If your on the fence, get it (just don't go over the fence into your neighbors yard)!
@@tonyennis3008 if it's his first time and he gets b- dovetails then it's a very good jig because anybody doing them for the first time without the jig would get a failing grade
I had a different idea for tip no. 1. Mine is to invite Matt over for a pint and let him cut the dovetails. Your list was good, though. Still no Jesus pen I see...
I'm curious Matt. Why don't you always use the jig so that you can then get your joints perfect right off the saw? as opposed to not using the jig and having to tidy up with a chisel?
Great stuff, always! Would be greate to see a test in between Japanese, North American and European chisels! Maybe Aldi could join in... as a sponsor...!
Awesome tips! The video seems a tad broken this time :/. Random question: When you’ve had the benchcrafted vise for a year or a half. Can you make a review on them? Keep on making sawdust and lovely joinery!
Love your videos, always great info - thank you! Think the new fancy "show" shop background is a little over the top (glass shelves and LED lighting in a shop?), I liked the genuine shop look you had before a bit better! :)
I am amazed that the Aldi chisel war started in this video towards Paul Sellers isn't headline news. Be calm people, we need diplomacy and not war! Dangerous times.
Agreed, looks simple when pros uses a knife, reality is it takes practice and is very easy to muck right up. My first attempt resulted in something psilocybin wavy, man! Glad I'm not a surgeon.
I've used both techniques. I now prefer the sharpest pencil. If the pencil tip wears quickly the line will be thicker and may affect the position of the pencil tip relative to the tail. Resharpen after tracing each set of tails onto the pin board.. I don't worry as much about tails. May be confusing, the point is keep the pencil very sharp.
High Point. The problem is that Aldi seems to rotate what is available. If you can find a manager ask them or visit frequently. I would say that HD or Lowes, maybe ACE or Walmart , Amazon would sell a comparable chisel=quality and price. Sharpening is the important thing.
I get my chisels from boot sales, dig around and find some nice ones in need of some of work ....for pence. Youd be surprised at what you can find, stanleys, marples etc. Plus hammers and planes.
Mijn beitels komen ook van ALDI/LIDL en je kan zeggen wat je wilt die dingen zijn vlijm scherp, zijn erg vlak en je krijgt ze gemakkelijk geschlepen. Voor een hobbyist of weekend-woodworker zijn ze uitermate geschikt. Ik vind je video's zeer goed en duidelijk maar niet iedereen kan zich de gereedschappen veroorloven die jij hier tentoonstelt. Ook hebben de meesten geen zin, tijd of gelegenheid om stad en land af te zoeken naar goede tweedehands beitels of andere spullen. Dus resumé: een beetje respect voor degene die zich alleen ALDI beitels kan veroorloven. Ik heb gezegt....
@@sotty1000 I mean, I'm German so I can read Dutch no problem, but I think we should all stick to English because it's what most people here understand.
Don’t think it was a dig so much as a reference to the debate surrounding cheap vs expensive chisels, and the bigger debate of how expensive does a tool have to be in order to be effective. I, for one, get by with box store chisels just fine.
There is a stark difference between sellers and estlea so just take your pick. I can see estlea likes the expensive kit whereas sellers is more about restoring life into older tools. Dare I say it there is quite a few years experience between the two chaps as well. But ultimately dont be a sheep. Soak in as much info as you can then find out what works for you
first one, you can you your knife, as paul sellers is doing. another one is to put some water on the part that you will remove, will make it way more easier. saw this on Japanese woodworking. you can also, use a pencil and before trying them, just mark colorise the inside of the tails. if they are too tight, you will the marks. as for lidl chisel, well. is all about the technique and how sharpen are. Not everyone has money for niesel 400 euro planes, or chisels :)
I had a 6th grade teacher (Mrs. Chumley (a stout woman like the teacher in "A Christmas Story" ) ) who could write left or right, backward as well as forward.
Matt: With all due deference would you be kind enough to consider slowing your speech a bit. Folks here in the US are not used to the cadence and inflection of your wonderful accent. I would suggest that you could do this in post when putting your video together... Some of us are very limited with experience and feel a bit of slow down would be beneficial. Hope you can be helpful. Absolutely love your shows, and consider them to be very helpful. Feel free to comment. Thanks!
You'll get the hanf of it quickly. I'm not a native english speaker and had trouble a first understanding regular US accents, then southern accent, then regular english, then "peaky blinders" english. Still struggle with lemmy kilmisters accent, and of course the scotts.
How can "Use a dovetail guide" be a tip to improve your dovetail skills? Honestly best thing Ive ever done is adopt Rob Cosman's dovetail method and learn how to saw plumb/straight. Offsetting the tail board the width of your saw kerf then marking the kerf straight onto the pin board then saw straight down. No clean up of the pins required only need to chop down to the baselines. Cuts the joint time down to 1/3 of the original.
This video is on how to instantly improve your dovetails, not necessarily the skills that take years of practice such as sawing. I cover those skills in all of my previous videos on the topic
I agree Matt!. Guides help build muscle memory. Consider the tricycle. Very few parents tell 4 and 5 year old children to get on the bicycle first, only to see then fall to an injury. Makes no sense to dismiss guides.
Which one of these tips are you going to try out? Let me know below!
If you're interested in the Katz-Moses Guide. You can get it here: lddy.no/stpe
Cool tools your selling! I'm certain many people may buy them! I'm always broke without money, IRS Child support stuff, but I still send support best I can by sending support as in inviting my friends to your channel & hopefully they'll like your stuff! Cheers / Skáld Sir, if I said to you that your brilliant & should be appreciated for carrying the legacy of carpenters NOBLE deeds & labors, that many should learn if possible I believe, because it's a honest craft & honest good labors that the world never lost & I pray to God Almighty never does lose... One of my biggest passions is carpentry & my most favorite thing to do.. well I gtg going, just wanted to update you all & notify you that you have another friend / carpenter buddy who appreciates the wood working crafts in life, sharing that in common & your videos good Sir. Thank you.
Sincerely, ~Paul
Great video Matt! Thanks for the shout out! You're truly a dovetail master.
Hello, how can one(living in France,) buy, find, procure, one of your dovetail guides? Thanks...rr/normandy
Thanks...rr
You are truly an excellent teacher. A dovetail master for sure, but your teaching skills are equally good!
This helped alor! Thank you Sir for your videos sincerely....
Thank you! Spent half my life in the Army, now studying woodworking, so best words I think: Thank You!
Great video: another advantage of gang cutting is that you only have tearout on the back piece, as all the pieces in front of it have support on the push stroke (assuming you are using a western-style saw). Most Dovetail saws don't leave too much tear out, but it's nice to have one less thing to worry about. Also, if speed is a factor, you can use a more aggressive joinery saw and make sure the back piece is either the inside of a drawer or sacrificial.
Hi Mate - When there's snow on the ground and the workshop is freezing what better way to spend an hour - or two watching your videos. You make me smile every time. Great ideas but I'm a bit old fashioned, I prefer to work free of jigs - heck I don't always measure my dovetails. I kinda like the rustic look - but accurate. Great vid again really enjoyed it - Regards Dave
That last tip is great. Something you pick up for yourself after five years of struggling, but good to hear now. Thanks, Matt.
And... oi... controversial indeed!
By far the cutest woodworker on youtube
I revisited your video today .Your tips are great as I stated earlier. I cut a lot of dovetails since then but as hard as I tried, occasionally there was an issue. So I thought about what was missing in my technique and in reality I was not spending as much time as needed to make sure all components were square, flat, without twist and straight, consistent thickness. I do most of my stock milling by hand so it's a bit harder I think, than by machine. Since adding this "quality control" to my technique, things have improved a bunch. Thanks for your video.
This is awesome. I went to a woodworking school, and have experience cutting dovetail; but there are several tips within this that I have never heard of. Excited to try them out!
Thanks. I'll try all exept the v groove. I will clamp a small steel ruller to the back of the tail piece.
I appreciate verry much your videos.
👏👏👏
Literally cut some tails last night for a drawer and thought about "gang" cutting simply for the sake of saving time. I thought it might actually make my cuts less accurate so i just went back and cut em one board at a time. Definitely gonna try it next time and see if i get better results.
Very good tips Matt. Thanks!
Very good. Cut my first dovetail last weekend, couldn't have done such a neat job without your vids. Top tips :)
Very worthwhile video. Especially liked 5.
Matt - Can you please make a video showing how to make the wooden dovetail guides seen in the beginning of this video? Would love to make a set like that for myself to use...
Thanks. I find that I need all the help I can get, and this helps.
Excellent as always. Your channel has become a main source for me when it comes to essential skills and how to perform them. Keep it up!
Thanks for the wonderful tips!
Great tips thanks for your excellent narration as well as presentation.
Will use all these besides for the dovetail guide. Also, on tip 5, i just strop the chisel a few times between use. Good video matt, always look forward to your content.
LOVE the new OSB wall covering, Matt!
It'll be better when he's hung the wallpaper and put some flowers in those glass cases. LOL
Thanks Matt, awesome tips... I like the tip with placing a shoulder on the backside to re-align!
Some really cool tips. Definitely a great tip on the end of sharpening before you do the finish pairing at the end for multiple dovetails.
Will definitely have to try these out once i start doing some doves!
Couple there that I had thought of but it's good to have them endorsed by a pro.
One thing I did think of, for an absolute beginner with only a cheap old coping saw that can barely get into the slots created by the nice new Japanese pull-saw, how about doing a third cut down the middle of the waste between the pins/tails using my old rusty B&Q tenon saw and then cutting left and right from that with the coping saw? As I see it, that means there's no danger of buggering up the edge of the pin/tail while getting the coping saw to make the vertical to horizontal turn. Obviously there's an extra saw cut to be made but it seems safer for a beginner with less than the ideal tools for the job. Do you have any thoughts on this?
Great tips, great video! Thanks so much!
Thanks for the tips Matt. I haven't seen or heard of these before. I really appreciate it. By the way I've been binge watching your videos. You do a great job with editing and there's always great take aways and things to learn. You have a new sub!
Even the dovetail marker is made up of dovetails lol love it
Hey Matt. Great video with some great ideas with great presentation. What more can I say? Great. Cheers Rich
these are great tips - thanks
Excellent material and well presented. hank you.
fantastic as usual.....thanks matt
Great info Matt. I learned a lot!
A few questions I have about dovetails is how short in height and wide can they be before they act like a finger joint, break off or as a wedge and break/split the wood and how effective would they be? Essentially what is the length limit for dovetails?,Can you reinforce them by during a hole across and put a dowel through the cross section?
Hi Matt. Another great video, many thanks.
I have been following you for a while and have been amazed how you seem to be able to do things "reverse hand", so now the truth is out!!
You're ambidextrous!! Blimey, amazing.
I'd give my right arm to be ambidextrous!!
Keep up the good work and keep the videos coming.
Best Regards Rich
Can you please please show us how you done the dovetail on your work bench.. its stunning. Thank you i love your videos
thanks for the fine tips on this series of cuts
Very good tips indeed! Thank you for sharing.
I'm interested in details about your dovetailed dovetail marker (not the saw guides). Can you hook us up with a "how to make it" video?
Watching your video makes me want to go out into the garage and start practicing dovetails! I'm still waiting for my chisels to come in, it's surprisingly hard to find actual bevel edge chisels for some reason.
So, Nick, it’s been three years-how are the dovetails?
Well,@@Devon.Martin I wish I could say it was going well, but I have yet to cut a single one. Life has been pretty busy/complicated the last few years and I've not really had any shop time until just recently. I've been working on some much-needed household projects prepping for a baby. Now spending some time figuring out schedules and hopefully getting him to sleep regularly so I can find some time back in the shop. I have a few projects to work on to get my channel back up and running, but fully plan to have some dovetail practice in the near future. Wow three years flies by.
@@TheEveryMaker I’m in the same boat as you with a newborn and woodworking. I’ll follow you on Instagram and wait for those first dovetails to pop up one day.
@@Devon.Martin what's your username, I'll follow you back?
Sweet video. Very helpful.
True story about the Katz-Moses Dovetail Jig. I never cut a single dovetail, bought the jig and cut about B- quality dovetails. If your on the fence, get it (just don't go over the fence into your neighbors yard)!
If the jig is good for B- dovetails, I would not be recommending it.
@@tonyennis3008 if it's his first time and he gets b- dovetails then it's a very good jig because anybody doing them for the first time without the jig would get a failing grade
Thanks. Very helpful ! ! !
This must be the 5th time I've watched this - still helpful :)
I had a different idea for tip no. 1. Mine is to invite Matt over for a pint and let him cut the dovetails. Your list was good, though. Still no Jesus pen I see...
Fair deal.
@@MattEstlea I'll top the drink and raise it with a meal and several drinks, what do you say Matt?
I'm curious Matt. Why don't you always use the jig so that you can then get your joints perfect right off the saw? as opposed to not using the jig and having to tidy up with a chisel?
Great Instructional video! I very much like your channel. Thanks.
Great stuff, always! Would be greate to see a test in between Japanese, North American and European chisels! Maybe Aldi could join in... as a sponsor...!
Cool vid mate, thanks for the help.
Awesome tips! The video seems a tad broken this time :/. Random question: When you’ve had the benchcrafted vise for a year or a half. Can you make a review on them? Keep on making sawdust and lovely joinery!
tell you what the aldi chisels beat the snot out of a new set of Marples in quality (not the old ones)
Love your videos, always great info - thank you! Think the new fancy "show" shop background is a little over the top (glass shelves and LED lighting in a shop?), I liked the genuine shop look you had before a bit better! :)
Matt, do you have any more tool duels coming soon?
Tip 5, use your Aldi chisels to rough out and your super sharpened sweethearts to finalise.
What marking knife is that?
What is the saw in the back of the video?
What's a tool jewel?
1:22 Katon, Clamp board no jutsu
I am amazed that the Aldi chisel war started in this video towards Paul Sellers isn't headline news. Be calm people, we need diplomacy and not war! Dangerous times.
I think Sellers could reply, "Best by test".
So there is a reason to get shiny tools? Great video bud, keep it up!
a vid on marking knives would be good there are alot of different ones to choose from
Good shout mate, I'll have a think!
Agreed, looks simple when pros uses a knife, reality is it takes practice and is very easy to muck right up. My first attempt resulted in something psilocybin wavy, man! Glad I'm not a surgeon.
I've used both techniques. I now prefer the sharpest pencil. If the pencil tip wears quickly the line will be thicker and may affect the position of the pencil tip relative to the tail. Resharpen after tracing each set of tails onto the pin board.. I don't worry as much about tails. May be confusing, the point is keep the pencil very sharp.
Great videos; always love watching....cheers...rr
thank you men finly i know it
I wish I had these videos when ibwas at college.
You very very smart I also learn more another join😅
The workbench was so young in those days.
Man, you're too good for your age! I envy you! :)
Yes, like the 4 Y.O. playing piano concertos. Amazing.
Hahah! Can’t get Aldi chisels here in the USA. I suppose the equivalent would be Harbor Freight.
I have recently purchased them in Aldi in NC.
What part of NC? Maybe I need to visit our local ALDI store more often. I was able to pickup a roll of handy double-stick tape there a few years ago.
High Point. The problem is that Aldi seems to rotate what is available. If you can find a manager ask them or visit frequently. I would say that HD or Lowes, maybe ACE or Walmart , Amazon would sell a comparable chisel=quality and price. Sharpening is the important thing.
HF chisels are very bad. Aldi chisels are a different thing.
Man.. I didnt know Jon Snow kicks ass in woodworking aswell...
Paul Sellers the master has no problem using Aldi chisels not everyone can afford 60 pounds per chisel from Lie Nielsen or Veritas .
I get my chisels from boot sales, dig around and find some nice ones in need of some of work ....for pence. Youd be surprised at what you can find, stanleys, marples etc. Plus hammers and planes.
Mijn beitels komen ook van ALDI/LIDL en je kan zeggen wat je wilt die dingen zijn vlijm scherp, zijn erg vlak en je krijgt ze gemakkelijk geschlepen.
Voor een hobbyist of weekend-woodworker zijn ze uitermate geschikt. Ik vind je video's zeer goed en duidelijk maar niet iedereen kan zich de gereedschappen veroorloven die jij hier tentoonstelt. Ook hebben de meesten geen zin, tijd of gelegenheid om stad en land af te zoeken naar goede tweedehands beitels of andere spullen. Dus resumé: een beetje respect voor degene die zich alleen ALDI beitels kan veroorloven. Ik heb gezegt....
@@sotty1000 I mean, I'm German so I can read Dutch no problem, but I think we should all stick to English because it's what most people here understand.
good video
Oh, those controversial Aldi chisels...
Lol.
Don’t think it was a dig so much as a reference to the debate surrounding cheap vs expensive chisels, and the bigger debate of how expensive does a tool have to be in order to be effective. I, for one, get by with box store chisels just fine.
I really like you channel Greg. Your videos and very nice and clear and pretty helpful. Well done and keep them coming,thanks!
Agreed!
Greg Wagener s
There is a stark difference between sellers and estlea so just take your pick. I can see estlea likes the expensive kit whereas sellers is more about restoring life into older tools.
Dare I say it there is quite a few years experience between the two chaps as well. But ultimately dont be a sheep. Soak in as much info as you can then find out what works for you
first one, you can you your knife, as paul sellers is doing.
another one is to put some water on the part that you will remove, will make it way more easier. saw this on Japanese woodworking.
you can also, use a pencil and before trying them, just mark colorise the inside of the tails. if they are too tight, you will the marks.
as for lidl chisel, well. is all about the technique and how sharpen are. Not everyone has money for niesel 400 euro planes, or chisels :)
👍👍👍
LOL, I thought you were a magician
ok make a guide how to make dovetail guides.
Aldi chisel... hahaha! Buy a few cartons of chisels.
Is it common for woodworkers to become ambidextrous? Quite amusing that you're literally more accurate than me with your weak hand...
I had a 6th grade teacher (Mrs. Chumley (a stout woman like the teacher in "A Christmas Story" ) ) who could write left or right, backward as well as forward.
Ambidextrous !?! I'd give my right arm to be ambidextrous !
I'd give my left arm to be ambidextrous.
Bruh, sharpen your saw!
Matt: With all due deference would you be kind enough to consider slowing your speech a bit. Folks here in the US are not used to the cadence and inflection of your wonderful accent. I would suggest that you could do this in post when putting your video together... Some of us are very limited with experience and feel a bit of slow down would be beneficial. Hope you can be helpful. Absolutely love your shows, and consider them to be very helpful. Feel free to comment. Thanks!
You'll get the hanf of it quickly. I'm not a native english speaker and had trouble a first understanding regular US accents, then southern accent, then regular english, then "peaky blinders" english. Still struggle with lemmy kilmisters accent, and of course the scotts.
Hank: I think you can adjust the speed of the video in the lower right corner. See if that helps.
No sense in buying guides if you only use them a few times in your life🤓
I didnt know you were ambidextrous. You said you were a lefty then you said you were a righty in a other video. I got confused
"There is the pins cut out".
Great use of English.
How can "Use a dovetail guide" be a tip to improve your dovetail skills? Honestly best thing Ive ever done is adopt Rob Cosman's dovetail method and learn how to saw plumb/straight. Offsetting the tail board the width of your saw kerf then marking the kerf straight onto the pin board then saw straight down. No clean up of the pins required only need to chop down to the baselines. Cuts the joint time down to 1/3 of the original.
This video is on how to instantly improve your dovetails, not necessarily the skills that take years of practice such as sawing. I cover those skills in all of my previous videos on the topic
If you want to use a guide then that's fine with me, guess I misread your title.
I agree Matt!. Guides help build muscle memory. Consider the tricycle. Very few parents tell 4 and 5 year old children to get on the bicycle first, only to see then fall to an injury. Makes no sense to dismiss guides.
See, all of this is why I just use pocket screws.