Great video. Very helpful. I recently installed one of these on my boat. Very interested in what the maintenance procedure is. You mention every 1,000 hours, what do you recommend to do every 1,000 hours? How do you clean it? What spare parts do you recommend carrying?
Mostly pull the burner carefully and decoke it. Be very careful to not harm the steel felt. I often will soak the unit in diesel or even a dip in acetone will help. So can build up on the fins of the exchanger too and this can be cleaned with a vac and a spare tooth brush.
Hey I would be really interested in how your total set up looks. I have a dickison heater at the moment and I am not happy with it and I was looking into buying this one. Could you maybe show your set up in a video or get in touch with me ?I would be super great full
Hi - thanks so much for this video. I’ve installed one but I’m getting some quite bad groaning noise from the circulation pump. No failure detected, and no loss of performance. Any tips on reducing circulation pump noise?
Hi starpath, thanks for the informative video. I’ve got on and it’s run a less than 1000hrs but it’s been installed for 5 years, I’ve got a six flash fault, temparture sensor, at the first stage of start up. Around 6 seconds after turning on. With your experience which temperature sensor would you replace first?
ruclips.net/video/kym3HyHu_XA/видео.html
Instablaster...
Everything I wanted to know without wasting time. Thanks much.
Great video. Very helpful. I recently installed one of these on my boat. Very interested in what the maintenance procedure is. You mention every 1,000 hours, what do you recommend to do every 1,000 hours? How do you clean it? What spare parts do you recommend carrying?
Mostly pull the burner carefully and decoke it. Be very careful to not harm the steel felt. I often will soak the unit in diesel or even a dip in acetone will help. So can build up on the fins of the exchanger too and this can be cleaned with a vac and a spare tooth brush.
Hey I would be really interested in how your total set up looks. I have a dickison heater at the moment and I am not happy with it and I was looking into buying this one. Could you maybe show your set up in a video or get in touch with me ?I would be super great full
This heat runs about 60 feet of registers, and easily keeps the boat(45 feet) to - 10c. Unlike the pot stoves, these can be used under sail.
Hi - thanks so much for this video. I’ve installed one but I’m getting some quite bad groaning noise from the circulation pump. No failure detected, and no loss of performance. Any tips on reducing circulation pump noise?
Hello, can you please tell me where to connect the Power Cables? Thank you.
Hi starpath, thanks for the informative video. I’ve got on and it’s run a less than 1000hrs but it’s been installed for 5 years, I’ve got a six flash fault, temparture sensor, at the first stage of start up. Around 6 seconds after turning on. With your experience which temperature sensor would you replace first?
Are you able to swap the diesel out for kerosene to avoid the additive problem?
Yes, I often run at least mostly kerosene in the winter.
I want one.for my ev