Miele W207 - Bypassing the Lid switch
HTML-код
- Опубликовано: 3 окт 2024
- Error: Red LED blinking rapidly at "too much washing powder" can also mean that your Lid / hatch / door switch isn't working.
It is recommended to replace the switch but this was a temporary fix to get
the laundry washed.
Switch part number:
D41X T.-Nr 4240231
0,1(0,05)/250~ μ 40T85 5E4
D41 0,1A 250VAC
LED blinking can also mean the water does not circulate properly, the hoses are blocked - here is a video about it:
• Solving a problem on a...
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
In my case, this limit switch is in stock condition. I am from India and checked the switch in the local market. I didn't get the exact one but get one similar type. I made some changes to the holder and fixed the switch properly. Thanks for your video.
Good to hear you found a new switch and did it properly👍
@@rangleri Thanks for your reply.😊 I just start up my washing machine and I get some error indications. I will share its photos could you help me with this? Thanks in advance.
If you don't mind, could you please share your email-ID?
@@jomonjohny3156 It is quite difficult to find any information of these errors. I tried searching then and still cannot seem to find any. I found out these ones on the video just by trial and error. So I am afraid I cannot help with your problem because I don't have any experience of other problems on these machines. But let's hope you can fix it!
Are you a technical professional? Maybe I required some bits of help from your side.😊
No I am only a hobbyist, at least what it comes to these home appliances.