How to make a plasma arc lighter. DIY electric lighter.
HTML-код
- Опубликовано: 15 май 2022
- I made a lighter from an old transformer
Pin Nokia
flyback transaction
Charger module
3.7v up to 10000v
circuit : drive.google.com/file/d/1qgdY...
Simply lighter
Diagram:
drive.google.com/file/d/1qgdYM4EQtWsqv77aIy7maJN8Ch_TbGQg/view?usp=drivesdk
better and stronger plasma lighter can be done with lipo 2s 3000mah 7.4v but need stronger mosfet and double resistors
@@stratiosastero6880 ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Lithium batteries make the best heat sinks for mosfets, thanks you for helping spread the word by implementing this genius idea.
Smartphones also have a heat pipe under the battery 🥰
for 5 seconds do you even need a heatsink. ???
@@makoveliprod yeah, those famous phones using 1kV plasma for normal working
@@chrisredfield5278 he could have just flipped the fet around and sunk the heat into the acrylic. They get really hot in very short time driven like that.
what i thought that's a fire hazard but we clearly saw in the video how capable he is with his blowing wind
Man the build is an eye candy, so cleanly made, I'm really satisfied by your worksmanship
Thank you!
This has to be great for lighting joints!
Brilliant idea, but I think capacitor will work better for this use case, even it had lower current density, but you can charge it fast and will give you more current per discharge .
You don't have to take so much trouble in getting transformer and the high voltage discharge can be easily produced.
This is amazing 😍😍!!
Nice circuit brother
Hell yes! Thank you!
Самая лучшая самодельная, электроимпульстная зажигалка, что я когда-либо видел!!!) Автор Красавчик!!!)
Главное, чтобы это не сработало в кармане, а то можно получить эффект электрошокера и чутка взбодриться =)
@@Yurek33 Она не так бьёт как шокер. Я когда бухал лет 5 назад, нас человек 10 у меня на хате было и у друга была такая зажигалка. Мне стало интересно, что будет если долбануть ею себя) Никто не захотел рисковать, один я придурок взял и.... Короче, она жжется и такая как.. горячая вибрация лёгкая, как если разогреть вибромоторчик, который из телефона, разогреть до градусов 300 и приложить к руке, в включённом состоянии) Нет такого как от шокера, не долбит и не трясёт, но щиплет знатно)
@@user-ux9zg4rn4x в шокере умножитель напряжения - десятки кВ на выходе и частота ниже. но и такой зажигалкой можно убить себя или сильно шокировать если развести электроды, взять один элетрод в одну руку а другой в другую. транс только залить надо эпоксидкой чтоб его не прошило.
@@user-bb8du2yc4e ничего не будет за счёт скин эффекта, поскольку эта хрень работает на мегагерцах. Убить не убьёт, а ожог получишь
@@Hugh_Morjoui ты мерял частоту? частота ниже 200 кГц может убить. А на видео самоделка пищит, значит частота меньше 18 кГц.
Tự chế bật lửa thật sáng tạo
Nice video👍
Thank you!
EXCELENTE
Real nice!👍🏼👍🏼
Litz wire is good for high frequency, more power. A zvs is for higher current. Transformers shatter, wires jump and soldered joints melt.
Thanks!
Автор красавчик надо такой соорудить😃👍
😂
Cool, very cool!!!
Thank you!
wow! Amazing ideas
Is the screw at the end not touching one of the battery leads? I saw it move when you were screwing it in
very good
Nice clean build😮🤯
Thank you!
What a clean build!👍✨👌
Thank you!
@@D.creative ได้เลยนะนี่
@@D.creative ได้เลยนะนี่
@@D.creative ได้เลยนะนี่เพื่อใช้งานในประเทศและการทำให้มีประสิทธิภาพ
@@D.creative ได้เลยนะนี่เพื่อใช้งานในประเทศและการทำให้มีประสิทธิภาพ
çok iyi 👏👏👏
The boards where he got the transformers are from a TV. For those who i know will went to know. 👍🇮🇪
Good
What about a power board 12v 15a how would you design it?
Very detailed and easy to understand. You are great👍👍👍
in my experiency, if you want an arc with more power, you should choose these boards with only one transformer, it will have a nice high voltage. and the secondary winding you choose the best for you, i made one 4+4, with a thiker wire. and at least two cells to get the best Performance. you should use a good switch or it will not last longer.
Thanks for explaining
You can actually be quite clever with the power switch. If you put it in the battery circuit then you are right, it won't last long usless it is rated for high current. But there is a trick, you can put it in the Gate circuit, in series with the 10 Ohm resistor. It will work just as well and the current it commutates is negligible. One extra high value resistor must be added between Gate and Source of the MOSFET to make sure the Gate does not stay charged when you turn the switch off.
@@blg53 very good set :)
Excellent....
Thank you!
This is so cool, or should I say hot! Wrery nice indeed. lol 😂
Excellent
Great job but probably should have a recessed switch and a cap so u could carry it. Also a 3d printed case would prob be stronger if u dropped it. I drop my lighter all the time.
Thank you!
You can wire in a safety switch in series with the button
Very nice!
What solder tool you used to attach the charger module?
I use a soldering iron, sir
I wonder if this can be replicated with capacitors.
Using spark gaps to generate a larger voltage.
Nope it cannot be replicated by capacitors because the capacitors also need high voltage to charge to create sparks
WOW!!!(вах)!!!действительно век учись! Но умирать не спеши!!!
What's the approximate output voltage of these? Out of curiosity I tried measuring the output of a small arc lighter I have and it immediately caused my cheap digital multimeter to reset itself.
Output voltage about 2000v-5000v
@@D.creative
God has said in the Quran:
{ O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
[He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
Quran
Thats kinda dumb! Btw you need 3kv per mm to create and arc
@@309electronics5 Yeah not my finest moment but at least the meter survived. Appreciate the info!
Should have used a pt with a known ratio for equipment safety.
Một video hay , dù không phải là cao siêu gì , nhưng nó là ứng dụng thực chất , rất đáng hoan nghênh !
Cảm ơn bạn!
Tôi rất thích video này của bạn ❤👍👍👍🤝
🤝🤝🤝
Поделка конечно прикольная. Но так как я такую собирал, отмечу. не стоило ложить транзистор на батарею. Он грется как *опа. Нужен радиатор и подальше от батареи.
Слушай, а как схема работает? Я не понимаю, за счёт чего идёт накачка катушки, разве транзистор тут чем-то быстро включается/выключается? Кнопку нажали, затвор открылся, и всё. Можешь объяснить принцип действия?
@@Ololoshize Схема построена по принципу блокинг-генератора, погуглите, информации на эту схему предостаточно.
@@Ololoshize по этой же схеме запускают ТДКСы от старых телеков
Cccccccciiiiiiiiiiiiirrrrrrrrrrrrcccccccccuuuuuuuiiiiiitttttttttt??????????
NICE VIDEO!!!!
I would like to ask...what is that glue you use on the plastic?? I have tried so many. will it work on lexan??
THANKS!
That soldering iron is very interesting, how I could make it.
Идея хорошая но в 21 веке проще купить чем заморачиваться!)
Yes, for those interested
Хорошая зажигалка получилась. Собери пожалуйста простой инвертор для поджига CCFL ламп.
P.S. C₂H₄Cl₂ - очень опасное вещество. Лучше клей чем-то другим.
ccfl лампу можно зажечь и такой зажигалкой, даже не придется первичные обмотки перематывать, да и здесь это было лишним, такие трансы с двумя первичками прекрасно работают в такой схеме "из коробки"
@@MrGloomybunny мне бы схему простую с минимум компонентов. Желательно на транзисторах без шимок и таймеров. Завалялось много ламп. Хочу оживить быстро и дешево
Если Вы про так называемые люминесцентные лампы, то в старом советском журнале "Радоилюбитель" (надеюсь, что не путаю с "Радио"), публиковалась схема для таких ламп. Собрал в те времена и радовался всем прелестям того схемотехнического решения (все другие были существенно хуже и сложнее). Сейчас может быть уже что-то получше можно собрать, так как та схема была совсем простой. Схема зажигала лампы даже с перегоревшими спиралями. Ещё нравилось, что лампа не давала заметного мерцания, как в родной схеме с дросселем и стартером. Возможно, что яркость лампы была чуть ниже полностью исправной, но это не точно, ведь уже лет 30 прошло с тех пор 8) Хорошо запомнил только одно - там было 4 диода в схеме и не было стартера. Завтра посмотрю что ещё в схеме - у меня этот светильник сохранился и работает до сих пор.
@@Yurek33 было бы здорово, узнать номер журнала. Уточните, пожалуйста.
@@Wide_Pupils Пока искал, нашёл три схемы в пределах 1992-го года. Которая у меня собрана и чудесно работает - первая в списке, то есть 1992/08. В ней два конденсатора (у меня это МГБО 0.5мкФ x 600В - такие древние советские металлические с лапками под винтовое крепление 60..70-х годов), четыре диода (у меня какие-то неизвестные пластиковые в форме параллелепипеда 6x5x4 мм примерно, с плоскими выводами) в схеме моста и сам дроссель от оригинальной лампы.
Качества у схемы такие:
1. Загорается мгновенно, без блямкания (на целой лампе точно так, а на перегоревшей не могу проверить, но на память - так же).
2. Не мерцает или мерцает незаметно, может быть с частотой 100Гц.
3. Простая схема без дополнительных силовых элементов, типа резисторов с нихромовой проволокой или лампы накаливания и конденсаторов всего два, а не четыре, как в некоторых схемах. Нашёл сейчас такую же схему, но там место дросселя лампа накаливания. Интересно, куда предлагается её физически запихнуть в конструкцию светильника, если там для неё места нет? Дроссель как бы штатное место занимает и если есть светильник, то дроссель уже присутствует.
4. Не издаёт никаких раздражающих звуков во время работы.
5. В схеме указан диапазон мощностей 20..80Вт, но не исключаю, что для больших мощностей номиналы ёмкостей надо повысить, но это не точно, может и так будет работать.
Схемы запуска неисправных ламп ЛДЦ (журналы доступны в DjVu-формате):
Журнал "Радиолюбитель", 1992 г., №8, стр. 28;
Журнал "Радиолюбитель", 1992 г., №6, стр. 22;
Журнал "Радиолюбитель", 1992 г., №1, стр. 35.
Поиском в Яндексе по ключевым словам "схема пуска неисправной люминесцентной лампы" можно найти много разных схем. Удобно ориентироваться по вкладке "Картинки".
Which device has this circuit from which you got the transformer? please reply
You can find the transformer in the board of old LCD monitor
@@D.creative ok sir ji thanks 🖤
Really loved this! Excellent job, could you please share plexiglass dimensions and drawings also ? I'll make one for me and one for a friend.
The size of the mica glass is 7.5mmx3.5mmx1mm
Circuit :
drive.google.com/file/d/1qgdYM4EQtWsqv77aIy7maJN8Ch_TbGQg/view?usp=drivesdk
Thank you for watching!
Wonderful sir! Can I use IRFZ44N mosfet in place of 12N60C?
Can use IRFZ44 but 12N60c works better
@@D.creative thanks sir. Plz tell me what can I do to improve its efficiency if I use IRFZ44N.
👍👍👍
Which glue you are using?
OK! 👍 Vēl varētu mazu galveno slēdzi un zilo Led diodi indikācijai, pret nejaušu ieslēgšanu!
👍👍👍
👍👍👍
Is The batery alternated current or diréct current ? If direct, what is the purpouse of the transistor
The purpose of the transistor is to oscillate
@@D.creative nice ! I'll give it a try on a larger scale. But is the batery dc?
@@_Creativo Yes, of course the DC . voltage
why this cant generate more electricity from this arc?
hey please make a small spot welding machine..
Sir ji transformar ka dusra winding ka turn kitna hai ?🤔
Any other MOSFET recommended?
👍
I'm confused... How are you getting switching happening on that Mosfet? If you don't switch the coil on a transformer I don't understand how you would boost the voltage.
I can literally hear that FET switching
you should add a heat sink to the MOSFET.
Nice Work Done Sir
Hii, if i use batery 18650 it is okay?
From where i can get that kinda transformer
what guage wire did you use for this?
0.3mm . copper wire
capacitors instead of battery wouldnt it be better?
No.
@Save Our Souls No.
The gauge, diameter of the copper wire how much is it? Thank you for your reply.
Diameter of the copper wire is 0.3mm
@@D.creative Thanks for replying, almost nobody answers these messages after a long time of video editing. And one last question, what is the reference of the charger module?
Isn't it just a slayer exciter circuit?
Excilent♥️🙏
с дизайном надо поработать
gostei muito parabéns ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆
Thank you!
From the board of which devices can this transformer be found?
Для полевого транзистора нужно меньшее количество витков в первичной обмотке) Также конструкция не надёжна, если только как демонстрационный образец.
❤❤❤ Türkiye den selamlar,
Tuyệt vời, Mặc dù nói về điện tử thì tôi chẳng biết gì, nhưng tôi lại rất thích mầy mò những đồ điện tử. Giờ coi thấy chương trình này của friend hướng dẫn rất tỉ mỉ, thật lòng tôi rất vui. Mong chương trình này của friend sẽ hướng dẫn nhiều cái thú vị hơn nữa
Nếu có thời gian mong friend chỉ giúp tôi vấn đề này nhé. Tôi tự chế một chiếc motor, vậy friend cho tôi hỏi: làm sao để một chiếc motor nhỏ mà tốc độ quay lại cao. Tôi thì đang nghĩ, hay là cứ quấn nhiều vòng dây đồng thì tốc độ quay nó sẽ tăng lên. Cảm ơn nhé
Không phải cứ quấn nhiều vòng dây là nó sẽ chạy nhạnh thưa bạn
Can I use instead of irfz44n transistor
You can
How to get mosfet
where we can use it ????
Bro can I use the transformer of ups it looks exactly Same
You can use, You only need the secondary coil (about 3000-5000 turns)
Try to get the box ful of clear resin
what would happen with a 30amp chip baked up with 10 cells 18650s , am curios , i know could run no longer than 10s depending on the set up.
if was to go big i know can be inceased but trying to keeep it handheld.
No, operating current is 2 amps
@@D.creative ok thank you
Would I survive if accidently touch those points?
Can i use battery 1.5v?
Cho e hỏi cuộn biến áp đó lấy ở bo mạch nào thế ạ
Bạn có thể tìm thấy ở các bo mạch cao áp của màn hình LCD cũ
Friend cho tôi hỏi thêm câu này. Cũng nhỏ như vậy nhưng để làm lửa nó mạnh hơn có được không và làm như thế nào? Thank
Câu hỏi rất hay, cùng một biến áp như ở video trên thì bạn có thể làm nó mạnh hơn bằng mạch ZVS.
Mạch điện bạn có thể tham khảo qua video này: ruclips.net/user/shortsfyyyGtWJFZs?feature=share
Cảm ơn bạn đã xem và ủng hộ kênh
Got a way to de-solder
does it work as a taser?
Hi. How many volts goes to the gate of the mosfet?
About 3v, sir
@@D.creative This is very small to open the gate of the mosfet. You need 10 volts.
@@user-bb8du2yc4e Good thing the battery is there acting as the heatsink of a MOSFET working in the ohmic region 🤣
Can you modify it to be more?
more than what sir?
How much copper wire to use?
Are you asking about the number of turns or copper wire size?
@@D.creative wire zise
You can use wire D 0,2 or D 0,3mm. Thank you for watching.
@@D.creative thank you
Главное в карман её не класть, то получишь заряд радости
Там он шурупик ввинтил и перегородку сделал
@@LISSIPISSY Верно.
Is there any current if we touch it?
Very small current. no danger
@@D.creative show it, please !!!
@@mohammedcherir1015 He's too chicken lol
I touched one running off of about 1/5 the power, and it jolted my arm pretty good! Limit the current through some meg-ohm resistors and it's much less dramatic...
I got that experiment on film too
brought this to school got suspended for having a taser and "aiding and abetting in the infliction of harm"
assalomu aleykum aka uyoqqa uqishga kirib borsa visa oson beradimi
agregale capacitores para mas chispas
Sir dusre sbhi video me1k ka resistance lagate he aap ne 10 ohm ka lagaya esa kyun.
You didn't do the tongue test?
So amazing promise 😇😇
The 0.04th and 0.12th seconds also use the same number of turns, right?
The coils L1 and L2 are the same size. L1 is 30 turns, L2 is 15 turns ,and circuit diagram : drive.google.com/file/d/1qgdYM4EQtWsqv77aIy7maJN8Ch_TbGQg/view?usp=drivesdk
Where i gett flyback transformer 1089 33??
You can find the variable on the board of old LCD monitors.
Я одного понять не могу с постоянного тока путём простого открывания транса создаётся какая-то частотота? Поясните мне пожалуйста как это у него получилось?
it's Blocking OSC
Thank you for watching!
高壓注意