How to Fix Maytag Bravos Washer Leaking Water | Water Leaking onto Floor | Model MVWB835DW0
HTML-код
- Опубликовано: 11 окт 2021
- In this Video, We have a Maytag Bravos Top Load Washer, Model MVWB835DW0, Which was Leaking Water onto the Floor, Coming from the Back of the Washer. After We Made Sure that The Water was Not Coming from the Bearings or Water Hoses, We Found that the Water inlet Valve Itself Was Leaking and Faulty and Needed to Be Replaced. Are you Having this Same Issue? Make sure to Watch the Entire Video to See How to Replace the Water Inlet Valve in your Maytag Washer!
Water Inlet Valve:
- Amazon: (Aftermarket) amzn.to/2YJbFvj / (OEM) amzn.to/2YN7bUH
- eBay: (Aftermarket) ebay.us/LfNuGT / (OEM) ebay.us/2kdYVS
Sign up For a FREE 30-Day Trial of Amazon Prime and Get Your Appliance Going Faster! CLICK HERE: amzn.to/3BA7Erj
Repair Clinic Offers OEM Parts and a 365 Day Return Policy! Make Sure to Have your Model Number Ready and Check them Out Here: www.anrdoezrs.net/click-10049...
If this Video Helped you in any way, Consider Leaving a Tip:
- Buy Me a Coffee: buymeacoffee.com/diyrepairsnow
- PayPal: @diyrepairsnow
- Venmo: @diyrepairsnow
*Please note that Links are Affiliate Links, Which Means by Using them We do Get a Small Commission. This Means You Can Support the Channel at No Extra Expense to you. Thank you for your Support.
Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk. DIY Repairs Now, Its Technicians and/or Its Affiliates are NOT Responsible for Any Property and/or Personal Damages, Including Serious Injury and/or Death. Please Be Advised, as You have Been Warned.
My Filming Equipment:
Canon M50: amzn.to/2WUHlY5
Rode VideoMicro Compact Mic: amzn.to/2TqKTzo
Canon M50 Mount Adapter: amzn.to/2MZv84t
Joby GorillaPod 3K: amzn.to/2Fn3jgd
GoPro Hero 7 Silver: amzn.to/2UNHImN
GoPro Hero 7 Black: amzn.to/2TnPXVd
GoPro Accessories Kit: amzn.to/2OnilpG
For Business Inquiries, Please Email diyrepairsnow@yahoo.com
Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!
- DIY Repairs Now
#appliancerepair #appliance #appliances #kitchenappliances #homeappliances #repair #dishwasher #kitchen #refrigerator #home #fridge #refrigeratorrepair #oven #washerrepair #homeappliance #authorized #washingmachine #dryer #ovenrepair #service #stove #freezerrepair #dishwasherrepair #maintenance #washer #kitchendesign #dryerrepair #stoverepair #applianceparts #bhfyp 
Хобби
Absolutely perfect video - my model, same problem, exact solution. All the tips - taping the top, the trick for removing the top and the console, and removing the valve and wiring - were put to use and got me back in business quickly! Thanks a million!
Single mom here and this video was incredibly helpful! I can’t believe I just fixed my own washing machine!!! Thank you so much!
You are so welcome! I am glad my video Helped with Your Washer Repair!
Awesome. Thanks. Mine was the 3 black rubber grommets below the water valve. I removed the valve and could see the rubber washers were dirty. I cleaned everything, and lubed them with some petroleum jelly. All good. Didn’t need a need valve. Just clean the 3 rubber feet. Try that first. $5 Venmo on the way.
Thank you for the video. It’s nice when you explain all your steps as you’re doing it. Excellent job
looks like you sealed your needle nose pliers were laying on top and you sealed them in when you put the machine back togerther... so if youre looking for your pliers they are in the machine.
Omg I watched the video 3 times to see if he got them out. Great video, hope he didn’t lose his pliers that day.
This has been happening to our washer, same make and model, thanks for the video! I’m off to order the part and fix it as soon as the part shows up. Thanks again!
Thanks! Solved my leaky Maytag bravos xl. Great video and went step by step with no issues!
Thanks for posting this video. It is exactly what I needed to watch in order to fix our machine
Great video, thank you for the great information on the lid, I had the same problem on my Matag and replaced the water valve and now no more leak, Again thank you
Thank you for your teachings. Here in California able to fix my leaky Maytag. Part recommended from Amazon arrived in 24 hours.
So on the ends of the compartment,, there are springs inside,, you can use a heavy magnet and start from the base towards the outlet, and keep moving it up and down and it breaks the spring free from Hard Water,, it'll save you from having to replace the part. Hope this helps!!
Even though it's plastic, the springs are not stainless, on most of them,, they are metal,, so the magnet will reach the metal and just move it up and down over and over, also I poured some apple cider vinegar in both hoses and plugged them back up and it pushed it through the valves /plastic compartment. And that will help loosen up the solenoids/Springs. This is my second time doing it within 2 years, but more I know the problem and it works. Hard Water will always mess these up, whether it's new or old. Definitely try this before ordering a new one. 👍👍
Many many thanks for making and posting the video. You covered just about every snag one could run into which made for a stress free repair. Five Stars all the way!
Great video -- thank you very much for the detailed info on how to access the failed water valve and the links for replacement part.
Thank you so much, you nailed it! This video helped me replace the part step by step. Great video!!!
Wow my friend! Thank you a bunch. Great video, awesome edits, easy to stay with. Gratitude.
Great video. This helped me fix my washer. I had the same issue. Well done.
Thank you so much for the video and part link. You were a life saver.
THANK YOU! You just saved us a big bill. This is exactly what happened to our machine as well!!!
I am glad my video can help people if you want to contribute to this channel you can leave a tip directions on the description of the video or you can like and share our videos thanks for the support I really appreciate it👍🏻👍🏻💯💯
Excellent video, thanks so much for sharing it. Hopefully we can solve the same issue in our Bravos Maytag Washer machine!!!
Thanks for watching my video👍🏻👍🏻💯💯
You saved me a lot of money! This is great, thank you!
Matag should pay water damage bill. These washers need a tub under them.
Fantastic video !
Hi I want to thank you for the information I had a leaking in my maytag washer I whit this info I was able to fix it thanks
Excellent video. I'm not a handy person. This video was easy to follow and I had the repair done in less than an hour as I followed along with the video.
Hey Great Great Video! I Hoped U Just Solved My Problem???? Going To See 👀 Where The Water Is Coming Out From
Great video , I am having the same issue with the same model. I have everything apart. Other than obvious water on the floor. How do I know this water valve is bad? Could it possibly just be loose?
Thanks for this video
Very helpful
One comment
When removing the terminals from solenoids, I found it a bit easier to tap on the front edge of the terminals with a flat blade screw drive with the blade pushing on the terminal housing. I think this would prevent accidentally pulling them to hard with the needle nose that could break the wires.
I pulled too hard on one of the plug connectors, and the plastic cover broke away from the copper connection points. So just beware of using too much force when pulling them apart. Be patient.
Hi -- I've watched this video many times trying to figure out where my washer was leaking from. I think I've isolated it to this inlet valve but it's not leaking from the hoses but actually into the actual washer frame itself and then dripping into the white pad below and onto the floor. I took off the back cover and stuck a rag up underneath where the inlet sits and there was quite a bit of water on the rag when it started filling. Would there be any other pieces I need to order/install in addition to the valve if that amount of water is coming out? already checked the drain pump and the hoses and installed new hose clamps and it appears to be functioning properly. Thanks for any help you can provide.
Thank for posting this easy to follow vdo. In my Bravos XL, the water is leaking and falling inside the tub. Does that mean that this same valve needs to be replaced?
Did you ever figure out?
My new (aftermarket) one is leaking after 2nd wash. Now what? If I wash a small load it only leaks every 3 or 4 washes. Any ideas? Or is it just junk aftermarket?
Awesome video, but you forgot your needle nose pliers in the pannel.
Yes, I realize that then I took it apart again and got it. Thanks.💯💯👍🏻👍🏻
Excellent video and thank you for posting it. Very easy to follow and you saved me a ton of grief, stress, and most importantly my wife is happy I could fix it and save money!
And 3 days later I’m having the same problem. Can you think of what may be causing the problem?
Me too. Same thing. Did you ever gets yours figured out? Id hate to waste money on another part for no reason with this one being brand new. @johngcsubpar9881
Great video, quick question alot of these water valves look the same does the serial number have to be an exact match?
You have to look for the water valve with the model number because a lot of them my look the same but maybe there are not identical so to be on the safe side use the model number to get the right part.
If you have the same exact model number that I have on the description it’s a link for this model on the description of this video
@@DIYRepairsNow Awesome, I ordered the exact match off Amazon. Check your PayPal I told my wife to send you some cash. Thanks again.
@@CHARGER08RT Thank you so much I really appreciate it💯💯👍🏻👍🏻
Great video but I think you left your needle nose pliers under the control panel.
Yes I notice when I finish recording and I got them😁 thanks for watching my video👍🏻👍🏻💯💯
I cannot get those clips loose (3:34). Maybe it's a lack of leverage? I'm only 5'1" but that's been the hardest part so far.
Did you get your pliers out of the top cover?
Nope
6:44 you forget your pliers under top cover :)
Yes, thanks I notice and I got them out😁👍🏻
I’m trying to start my own business and I’m wondering if you can give me an idea the cost total please I appreciate it
I have a Podcasts section on my channel and I explain how I charge for repairs but for something like this repair I charge between $185 and $245
Mine is leaking into the tub when in the off position.
Did you ever fix this?
@ryanclary2137 yes. I replaced the valve.
My washer is dripping inside the wash tub itself. Will replacing the water valve fix that?
Yes
Thank you so much for the help
@@tylerbrindley692 You’re welcome thanks for watching my video💯💯👍🏻👍🏻
@@tylerbrindley692 did this fix your problem?
@@ryanclary2137 yes it did haven’t had an issue since
I replaced but still leaking from soap dispenser plastic tray
Sometimes you need to wait because you think it’s still leaking but it’s just water inside the trade eventually it’s gonna stop if you wait for a while and it’s still leaking. You need to return the defective water valve and install a new one.
@DIY Repairs Now
Oh ok, I was thinking it might be the plastic tray that the water valve goes into. I can see water coming from the bottom of tray.
where the link to the thing I gotta order
Links to This Part are in the Description of This Video.
6:43 into video you didnt take your pliers out before sealing up the machine, good video though, thanks
I have a good video of my 6 year old Maytag washer knocking loud during the wash and leaks on the floor rarely. Can anyone DM me so I can share?? I super appreciate it. I’m a handy guy and know a little about everything so someone who has some knowledge it will help.
😢 Lol.. Seen It For Myself! It's Coming From The "DRAIN PIPE" Indeed! And Suggestions Or Top SOLUTION 🤔 FOR THAT JOB???
Great video, until I found out the part is over $200. And not even sure that's where the leak is.
There is a link in the description of this video. The part is $45.
good video, but please keep that camera still, its making me diZzy
You left your needle nose under the cover...
Your pliers will be there when you get back.
Great video.