Thanks for the heads up on how to get my display back! It totally worked! You saved me from buying a new stereo! I was extremely proud of my accomplishment after following your instructions! I can't thank you enough!
Thanks so much! The display on my radio in my 2010 Ford Explorer wasn't working. I just did this today, and it worked! So happy I can see 👀 what station I'm tuning to, the time, and I can adjust the bass 🔊
What an awesome video.You have no idea how much I appreciate you guys doing what you do for us do-it-yourselfers.This took care of my exact problem,saved me the price of a new unit.
Perfect, Easy to do and now working like new (probably better as some of the original joints had no solder on them at all). Thank you for the great video!
Thanks for the introduction to modern automobile radios. Even though mine is 20 years old. I hadn't taken one apart since they were full of vacuum tubes. I looked at the back side (dare I call it the "solder side"?) of the multi-layer PCB that holds the fancy display, on the "other" (front) side. I wore my best reading glasses and used a large magnifying glass that facilitated my inspection with both eyes. I saw no open solder connections, though solder joints were legion. I saw no fatigue anywhere. I decided the problem might have been in the fitment together, so I simply put EVERYTHING back together nice and tight. No soldering performed, at all. IT WORKED.
this video helped me a ton. now I can figure out what my radio is on and not feel the need to punch it. thank you very much. the whole process only took 5 minutes once radio was out of my f350
Just finished repairing the radio on my 07 explorer. Under magnification I saw one of the solder joints had cracked apart. Easy fix once I knew where to look. Thank you.
Thank you very much, I really appreciate it! This fixed the problem. Solder was only added to the center resistors. You might need another hand and tweezers to help you hold down the resistors because as soon as solder was applied to one resistor end, the whole resistor came off. In any case, nice beads of solder were applied to the resistors in the center and the display is working again!
It worked for my 2007 Explorer. Soldering iron probably would have worked better than my gun but it got the job done. Did have some resistors come off the pad and had to hold with a small screw driver while I resoldered. Rosin core solder around .035 size is what I used. Thanks so much for the info to fix it.
Great video, Thanks for posting. Worked on my Australian ford radio. The screen didn't work so I couldn't put the security code back in. I have tunes again yayyy!
muchas gracias por compartir tu video, acabo de comprar un fusion 2008 no funcionaba el lcd solo que el estereo no era similar al de tu video, aun asi resolde donde encontre componentes similares al que resoldaste tu y funciono a la perfeccion el estero, saludos!!!
Disculpa tengo muy poca relación con el Inglés que componentes indica en este video tengo el mismo problema no enciende el display pero si se escucha espero puedas ayudarme amigo gracias
Great vid!! I hava similar problem w/ my OEM pont vibe’08 stereo. I bought a duplicate unit (old one had worn away all lettering on frnt display. Nu unit worked but no lites. Put old unit back in, which had one light out originally, and it also, suddenly, had no lites! Radio works, tho. Wat duz it meen?!!!!😣 Thx😄
Hi Great video. I have a Ford radio much like this one. THe radio keeps jumping into Seek and only stays on my chosen station for a few minutes, then it Seeks. What can I do, please?
How do I fix the display on my 2003 ford f-150 cd/cassette/radio? Took it into a repair shop and they said they resoldered the power board,but that did not fix it.
I have a similar stereo, but with the two connectors plus the wire pair which go to the CD unit. It worked fine until a month ago. Now, the bottom row freezes. It is supposed to display song info, and it does, but only once. If I power it off and back on, it will work again but only once. I have tried other stations, but it's the same. Any ideas?
I have a 05 Grand Marquis with a similar problem but the display works when I do the display test function. (Press and hold 3 & 6 then press 5.) I would think if it had bad solder joints it wouldn't work at all. Any ideas? We checked all the fuses that looked like they might be even remotely related to any type of dash light or dimmer. All the gauge lights work.
Hi I pulled my circuit board out from dehind the black face. I see a burnt area in the lower right corner of the digital display that radiates out word maybe 3/16 " Under the flat plastic face plate. Is this fixable? All stereo functions work, just no display.
I have an issue where I have no sound, the display and every other function in the stereo works including the integrated factory rear DVD "entertainment" stuff. I swapped stereos with a fellow Excursion friend and his stereo worked immediately in my truck, he plugged my stereo in his truck and it failed to produce sound. So it must be internal components to the stereo itself. Any ideas where to look on the circuit board? Thanks
My Ford explorer CD radio is just like that one my radio works but my CD ? It does not you can't even here the motor in it it use to work but before it stopped it kept showing "CD error and would not rejected out the CD ;( can you help?
Thanks for the heads up on how to get my display back! It totally worked! You saved me from buying a new stereo! I was extremely proud of my accomplishment after following your instructions! I can't thank you enough!
That display has been broken for over five years. I fixed it in five minutes after watching this video. Thanks.
Thanks so much! The display on my radio in my 2010 Ford Explorer wasn't working. I just did this today, and it worked! So happy I can see 👀 what station I'm tuning to, the time, and I can adjust the bass 🔊
Glad I saw this video before buying a new one. Mine works great now! Thanks for the video!
What an awesome video.You have no idea how much I appreciate you guys doing what you do for us do-it-yourselfers.This took care of my exact problem,saved me the price of a new unit.
Perfect, Easy to do and now working like new (probably better as some of the original joints had no solder on them at all). Thank you for the great video!
Thanks for the introduction to modern automobile radios. Even though mine is 20 years old. I hadn't taken one apart since they were full of vacuum tubes.
I looked at the back side (dare I call it the "solder side"?) of the multi-layer PCB that holds the fancy display, on the "other" (front) side. I wore my best reading glasses and used a large magnifying glass that facilitated my inspection with both eyes. I saw no open solder connections, though solder joints were legion. I saw no fatigue anywhere. I decided the problem might have been in the fitment together, so I simply put EVERYTHING back together nice and tight. No soldering performed, at all.
IT WORKED.
Thanks! 1 or 2 years without light. I am graced with solid brand new looking led lighting again. 👋 💡
Worked exactly as described. And it only took about 30 minutes total. Thanks!
Thank you sir, for this informative video. As well as your removal video on this radio.
Awesome video. Took 5 minutes to get it out and another 5 to touch up the solder joints. Thanks a lot. I have my display back now.
Thank you very much for the tip. I pull these 1966 to 1998 Ford radios from the yards, and this issue somewhat common I am finding. Reno, NV USA
Following this as a guide i was able to fix the display on my 2010 Expedition with no display. So greatful!
I had the same problem no display on my Ford radio and did exactly as shown and sure enough, it worked! Thanks!
this video helped me a ton. now I can figure out what my radio is on and not feel the need to punch it. thank you very much. the whole process only took 5 minutes once radio was out of my f350
Did exactly as shown in the video, 2011 Ford E250 radio, problem solved!!! thank you so much
Did exactly this and in 20 min tops fix the problem! Thank you for the video!
Just finished repairing the radio on my 07 explorer. Under magnification I saw one of the solder joints had cracked apart. Easy fix once I knew where to look. Thank you.
Thanks!!!. The display is working now (escape 2006). Thanks again.
Thank you very much, I really appreciate it! This fixed the problem. Solder was only added to the center resistors. You might need another hand and tweezers to help you hold down the resistors because as soon as solder was applied to one resistor end, the whole resistor came off.
In any case, nice beads of solder were applied to the resistors in the center and the display is working again!
instablaster.
Great video! Solved my no display on 2006 Ford Escape.
It worked for my 2007 Explorer. Soldering iron probably would have worked better than my gun but it got the job done. Did have some resistors come off the pad and had to hold with a small screw driver while I resoldered. Rosin core solder around .035 size is what I used. Thanks so much for the info to fix it.
Thank you very much! I had been suffering without display for a few years. I just did as you say and problem was solved in minutes!
Thank you! I have the same radio and this procedure fixed the display! (2005 Sport Trac)
Worked beautifully on my 2006 explorer's head unit as well.
Fixed my radio in a matter of minutes, thanks so much!
Great video, Thanks for posting. Worked on my Australian ford radio. The screen didn't work so I couldn't put the security code back in. I have tunes again yayyy!
Worked great for my 2010 f250. Thanks for the video!
Thank you sir! This fixed the display in my 2011 f250.
Thank You! This fixed my Display on an 05 Explorer
muchas gracias por compartir tu video, acabo de comprar un fusion 2008 no funcionaba el lcd solo que el estereo no era similar al de tu video, aun asi resolde donde encontre componentes similares al que resoldaste tu y funciono a la perfeccion el estero, saludos!!!
Disculpa tengo muy poca relación con el Inglés que componentes indica en este video tengo el mismo problema no enciende el display pero si se escucha espero puedas ayudarme amigo gracias
Worked great! Thanks for the video.
Thanks! Very helpful video!
I wish I could do this, I hate not being able to see the display screen. But thanks for video 🌟🌟🌟
this was very helpful and saved me $$ thanks
Great video very informative!
Happy new year
thank you - this worked for me!
Great vid!! I hava similar problem w/ my OEM pont vibe’08 stereo. I bought a duplicate unit (old one had worn away all lettering on frnt display. Nu unit worked but no lites. Put old unit back in, which had one light out originally, and it also, suddenly, had no lites! Radio works, tho. Wat duz it meen?!!!!😣
Thx😄
Thanks alot it works great now
Hi Great video. I have a Ford radio much like this one. THe radio keeps jumping into Seek and only stays on my chosen station for a few minutes, then it Seeks. What can I do, please?
and of course im the odd ball out.. i DID ALL that the same way.... NO CHANGE... any other hidden joints to solder?
How do I fix the display on my 2003 ford f-150 cd/cassette/radio? Took it into a repair shop and they said they resoldered the power board,but that did not fix it.
I have a similar stereo, but with the two connectors plus the wire pair which go to the CD unit. It worked fine until a month ago. Now, the bottom row freezes. It is supposed to display song info, and it does, but only once. If I power it off and back on, it will work again but only once. I have tried other stations, but it's the same. Any ideas?
I have a 05 Grand Marquis with a similar problem but the display works when I do the display test function. (Press and hold 3 & 6 then press 5.) I would think if it had bad solder joints it wouldn't work at all. Any ideas? We checked all the fuses that looked like they might be even remotely related to any type of dash light or dimmer. All the gauge lights work.
My display is seen during the day, but at night the bulb doesn't illuminate. How does one fix the problem of the bulb not illuminating?
Hi
I pulled my circuit board out from dehind the black face.
I see a burnt area in the lower right corner of the digital display that radiates out word maybe 3/16 "
Under the flat plastic face plate.
Is this fixable?
All stereo functions work, just no display.
What type of wire did you use (Rasin flux core or Mig wire)????
Does Anyone know what the problem is when my display of my FORD CD 6000 gives only “ oranje”backlight but no signs in the display Wathever i do?
I have an issue where I have no sound, the display and every other function in the stereo works including the integrated factory rear DVD "entertainment" stuff. I swapped stereos with a fellow Excursion friend and his stereo worked immediately in my truck, he plugged my stereo in his truck and it failed to produce sound. So it must be internal components to the stereo itself. Any ideas where to look on the circuit board? Thanks
what type of solder are you using for this i would like to know the size and all also what is the solder tool you have here?
Hakko desoldering tool. Solder, don't know off hand.
Hello I have a 99 ranger and my radio will not remember the clock or the settings for the radio station.Do you have a solution for that?Thanks
My Ford explorer CD radio is just like that one my radio works but my CD ? It does not you can't even here the motor in it it use to work but before it stopped it kept showing "CD error and would not rejected out the CD ;( can you help?
Can you please share the components link what kind of solder tks
Will this work for the radio with navigation ? 2003
How do you get the Aux to work on this head unit
it seems to be an easy fix but I have no soldering iron so where can I get this work done to my radio
Adrian M get iron at radio shack or online
Hii
same issue kia soul 2010
I have a 2000 Lincoln Cartier town car and my stereo works but don't light up, could this be my prob? thanks...
Town Car, should be the same.
thanks ..