OMG. Thank you sooo much. Ive managed to disassemble my go pro and reassemble it again, and my go pro of being dead for 2 years finally worked again. I guessed it was a loose wiring. Thank you soo much. I was so ready to throw away my go pro.
Great video with detailed instructutions to open the camera. Actually I am a GoPro user and not an electronic camera expert. I stumbled up on this video while serching for GoPro repairs. I have GoPro 6 black and its on off switch pad is torn and lost. The camera is working. I can put the cam on and off by pressing the metal switch seen through the torn opened swithch window. can this switch pad be replaced ? Kindly advice.
Hi. My gopro black 7 shows 'no battery ', but battery it's fully charged and turns on the camera. Although i press record and it will no start record, just freeze and blocks. Any suggestion for fixing?
Hey bro... thanks for the video... really helpful. Unfortunetely my gopro got salty water inside (even tough its suppose to be waterproof). And now it doesn't turn on. While tearing down I have observed that the conector for the power button on the motherboard are all burned and the flat cable got destroyed too. I'm going to buy a new motherboard. Is there a way to replace the flat cable?
I made my way to remove the battery frame and the burned flat cable. Yet, don't know if I will be able to find and to connect the new one. The connection seems to be behing the lcd frame
Anh ơi em có cái gopro 5 mà đang update bằng điện thoại thì nó bị nhấp nháy đèn đỏ bật ko lên với màn hình hiện chữ i thì nó bị lỗi gì nhỉ, giúp em với đc ko?
Thanks wonderful video. Question, by 3d CADing and 3d Printing your own case could I turn the camera assembly 90° so it would be pointing out the side of the USB. SO are the ribbon cables long enough to bend 90°? I like the GoPro, but the form factor is all wrong for mounting on a helmet. This way, the camera would be sitting with its back to the helmet. I don't want to get into any soldering, just repositioning.
@@Light_Camera_Story Hi, I managed to get it working. I soaked it in IPA, let it dry over night & it's working. Only issue is now I have drying rings on the screen. But i'll that that over a non working device.
@@Near2Future Hey dude, I have that exact same problem, can you tell me what IPA is? I kinda want to try this aswell, I have that same solid LED at the front and no working led on the rear and camera wont turn on. I can charge batteries in it though, so the charging port seems to be working.
I dropped my GoPro 7 from 50 ft. And both the front and the back screens don’t work. No power or any lights will turn on. I took apart and the lens is still good. What do I replace to make work again?
BUY THE SCREW AND OTHER ACCESSORIES :
. TORX SCREW DRIVER : amzn.to/3OY1Iz1
. Klein Tools 32717 Precision Screwdriver Set with Case : amzn.to/3yfSiZX
• HASSELBLAD MEDIUM FORMAT CAMERA: amzn.to/3K3jmj8
• CANON 17-40MM L USM : amzn.to/3f59x5O
• CANON 70-200MM F4 L USM : amzn.to/3qYIChD
• Canon EOS 90d: amzn.to/3G8XwIy
• DJI OSMO Pocket : amzn.to/3zCWYrM
• SD CARD: amzn.to/33a9dA6
• ZOOM H1N : amzn.to/3zCXdDc
• CAMERA BAG: amzn.to/3FjZAwh
• LAV MIC: amzn.to/33bnuMT
• TRIPOD : amzn.to/3zBgapU
• MINI TRIPOD: amzn.to/3f16cVh
• LED LIGHT : amzn.to/33k1QX2
• SAMSUNG SSD : amzn.to/3q4FNMP
• MACRO ECTENSION TUBES: amzn.to/3HJMxWm
• MACRO FILTERS: amzn.to/3zBpfPw
Some More...
• 35MM KODAK GOLD : amzn.to/3zBpCcS
• 35MM FUJI C200 : amzn.to/3q5ZCmK
• ILFORD HP5 BW FILM : amzn.to/3GaqgR1
• FUJI ACROS ii B&W FILM: amzn.to/3fa0joN
And More......
• FILM DEVELOPEMENT KIT: amzn.to/3G7iNCw
• PLUSTEK FILM SCANNER : amzn.to/3F6Lmia
• MY ROYALTY FREE VIDEOS: www.pond5.com?ref=lestreasurehunters127
---------------------------------------------------
If These were Not Enough....
DISCOUNTS in Online Shopping : fr.igraal.com/?parrain=AG_5d57f6852508c
Subscribe In Gumtree : mrphotographer.gumroad.com
SPEECH TO TEXT Software: otter.ai/referrals/XEDYUFFH
OMG. Thank you sooo much. Ive managed to disassemble my go pro and reassemble it again, and my go pro of being dead for 2 years finally worked again. I guessed it was a loose wiring. Thank you soo much. I was so ready to throw away my go pro.
Thank you so much for showing us how it's done. Your calm, pleasant, thorough presentation was great.
Nice one, hopefully won't end up needing to take a gopro apart but if I do at least I know where to look
Found this really helpful thanks!
Thanks. Helped me repair my camera
Glad to hear that 😀
tnx :)
What glue can I use to restore the waterproof capabilities?
This is a good one. May I know if the gopro hero 7 is still waterproof after tearing it down or you need a waterproof case?
Unfortunately, you do.
Great video with detailed instructutions to open the camera. Actually I am a GoPro user and not an electronic camera expert. I stumbled up on this video while serching for GoPro repairs. I have GoPro 6 black and its on off switch pad is torn and lost. The camera is working. I can put the cam on and off by pressing the metal switch seen through the torn opened swithch window. can this switch pad be replaced ? Kindly advice.
can the lens be disassembled? it seems that inside the lens there is a kind of glass ball..and mine looks like the ball is loose..can it be fixed?
Hello dear! After repairing, what kind of silicon or glue should i use to close?
Hi thanks for the video.
I have a query does , the motherboard have serial no. ?? Is it unique for each device ??
Hi. My gopro black 7 shows 'no battery ', but battery it's fully charged and turns on the camera.
Although i press record and it will no start record, just freeze and blocks. Any suggestion for fixing?
I have a GoPro that says no battery when a battery is inside and it won't record any ideas why?
Hi i break the support plat of the camera unit and i dont no where to find it. Have you some link to find some pieces like this ?
Will it still be waterproof?
Hey bro... thanks for the video... really helpful.
Unfortunetely my gopro got salty water inside (even tough its suppose to be waterproof). And now it doesn't turn on.
While tearing down I have observed that the conector for the power button on the motherboard are all burned and the flat cable got destroyed too. I'm going to buy a new motherboard. Is there a way to replace the flat cable?
I made my way to remove the battery frame and the burned flat cable. Yet, don't know if I will be able to find and to connect the new one. The connection seems to be behing the lcd frame
Anh ơi em có cái gopro 5 mà đang update bằng điện thoại thì nó bị nhấp nháy đèn đỏ bật ko lên với màn hình hiện chữ i thì nó bị lỗi gì nhỉ, giúp em với đc ko?
do u know if u can put a hero 7 screen to a hero 5?
Thanks for sharing!! My ON/Off rubber switch cover on the side of my Hero 7 Black has a hole in it! Do you know of a replacement? No help at GoPro.
Unfortunately you have to go to a authorized GoPro repair shop to fix your issues.
Good luck.
@@Light_Camera_Story I fix it myself.... Thanks 👍
Thqu brother
Thanks wonderful video. Question, by 3d CADing and 3d Printing your own case could I turn the camera assembly 90° so it would be pointing out the side of the USB. SO are the ribbon cables long enough to bend 90°? I like the GoPro, but the form factor is all wrong for mounting on a helmet. This way, the camera would be sitting with its back to the helmet. I don't want to get into any soldering, just repositioning.
Unfortunately I don't have any expertise in 3D Cading and printing.
My apologies.
@@Light_Camera_Story Sorry, I should have just asked. Is the ribbon cable on the camera long enough to turn the camera 90°?
Is there a way to restore the waterproff seals afterwards ? Thanks
I am not aware off.
is it even worth to replace power button on go pro hero 7 or just save for new go pro
It depends how much is the reperation
My go pro doesn't turn on. Just can get one solid LED at the fron but no LED on rear. How could I fix this?
You need a professional repair in your area.
@@Light_Camera_Story Hi, I managed to get it working. I soaked it in IPA, let it dry over night & it's working. Only issue is now I have drying rings on the screen. But i'll that that over a non working device.
I can fix your camera
@@Near2Future Hey dude, I have that exact same problem, can you tell me what IPA is? I kinda want to try this aswell, I have that same solid LED at the front and no working led on the rear and camera wont turn on. I can charge batteries in it though, so the charging port seems to be working.
The usb -c of my gopro 7 silver is loose so i'm unable to charge it, someone know how to fix it or where find the spare part?
how to disassemble the side buttons?
Is the hero 7 lcd same for the hero 8?
Normally yes.
I dropped my GoPro 7 from 50 ft. And both the front and the back screens don’t work. No power or any lights will turn on. I took apart and the lens is still good. What do I replace to make work again?
Maybe it's the motherboard.
Would you fix my hero 7 black?
is it a T2 or T3 screw?
Thanks for this video sir.. but my GoPro is daed..
Doest still waterproof or not because you open item?
No unfortunately.
My gopro hero 7 black wont turn off. I have done the latest update etc. What could be the problem and solution to that?
Unfortunately I don't have a solution for this. Wish you good luck.
Helo sir it’s possible replace new wireless card gopro hero 6? My gopro xpair with hp & remote gopro
I am not sure.
Someone knows where can i buy the hexagonal screws?
Is it possible to ship my GoPro Hero 7 silver to you to get fixed for a fairprice
Normally I would say yes. But, due to Cov, the transportation don't look good. I had few of my order cancelled.
Apologies.
Someone knows where can i find he hexagonal screws?
BUY THE SCREW AND OTHER ACCESSORIES :
. TORX SCREW DRIVER : amzn.to/3OY1Iz1
. Klein Tools 32717 Precision Screwdriver Set with Case : amzn.to/3yfSiZX
• HASSELBLAD MEDIUM FORMAT CAMERA: amzn.to/3K3jmj8
• CANON 17-40MM L USM : amzn.to/3f59x5O
• CANON 70-200MM F4 L USM : amzn.to/3qYIChD
• Canon EOS 90d: amzn.to/3G8XwIy
• DJI OSMO Pocket : amzn.to/3zCWYrM
• SD CARD: amzn.to/33a9dA6
• ZOOM H1N : amzn.to/3zCXdDc
• CAMERA BAG: amzn.to/3FjZAwh
• LAV MIC: amzn.to/33bnuMT
• TRIPOD : amzn.to/3zBgapU
• MINI TRIPOD: amzn.to/3f16cVh
• LED LIGHT : amzn.to/33k1QX2
• SAMSUNG SSD : amzn.to/3q4FNMP
• MACRO ECTENSION TUBES: amzn.to/3HJMxWm
• MACRO FILTERS: amzn.to/3zBpfPw
my back screen stopped working . on hero 7 black. ..
Bad news.
@@Light_Camera_Story ruclips.net/user/shortsdGgFvL1sq1E?feature=share
screwdriver t ?
YES
my sd card slot of gopro 8 is broken, how can i replace it?
i couldn`t find it anywhere
Sorry my friend. I can't help you.
Think i knocked the power off. Took a hard hit
Good luck my friend.
👍👍👍👍🤝🤝🙏🙏🙏
Hi guys,
is anyone able to repair my GoPro Hero 7? If so, I would ask you to send me a message.
I would be really grateful!
Kind regards
This is just an ad for a tool kit!
It always snows in Saudi Arabia.
Tip: grow some nails before doing this.