@@lmf868 If you have complete control over the subject and actions being filmed along with ample time to adjust push and pull, then sure,... but since that is usually not the case for average Joes like me then stick with a fast autofocus, aka a regular camcorder or late model Canon DSLR.
You can also directly connect live to any HDMI compatible device i.e a field monitor. The people buying these cameras are not using them like action cameras
most c mount vintage lense were made for a 16mm film frame , which is larger than the go pro sensor, finding a good wide angle lens will be hard but I like your work
Correct, Bolex are largely 16mm format which results in a crop factor of roughly 2.05x on the GoPro. 10, 12 & 13mm Bolex lenses are relatively common for around $100 and provide a medium/wide field of view. Wide 8mm & 5.5mm are also available but usually cost a bit more. D-Mount, which is largely designed for 8mm film is pretty much a perfect match for the sensor size in the GoPro and results in a crop factor of almost 0. We sell a simple adapter ring for those lenses as well. Here's a link to a video shot with vintage Bolex & D-Mount on one of our Hero4 mods which has the same sensor size as the Hero7: ruclips.net/video/Cxg1kGUnkhg/видео.html
The BB modification doesn't change the physical capabilities of the GoPro CMOS sensor. However, larger lenses do culminate more light onto an equal square area of the sensor so you have some added capabilities by using different lenses vs. the very small stock GoPro M12 lens. In the end- the biggest advantage to a Back-Bone modified GoPro camera isn't the improvement to their sensors low-light capabilities.
The only reason why you might want to use this is if you want to set it somewhere steady and lets it film without the need to change focus etc, and that is because this is a tiny camera and has 4k60fps which many more expensive cameras don't have. And that microscope attachment is pure gold. I can find many reason why this has a reason to exist (Hero8 also has mods). BUT If you are an average user and you want to use it as a good camera then forget about it, the price of this is close to professional cameras that can do a lot more for the said price and if you want you can add a little bit more and get yourself an even more professional camera. The Hero8 is 849USD already and there are cameras that has far more options for video than this. Remember that GoPro is an action camera and the company gives focus to this. IF gopro ever makes this by default and offers auto focus then they will kill the market for sure. For 849USD and auto focus with the GoPro artificial intelligence and ultra smooth stabilization, people would be running for their money. The only next reasonable purchase would be a bmpcc4k because of the higher bitrate and higher sensor.
what makes you think I will buy H7Pro while I already have Hero 7 Black? All I need is the c-mount and other mounts with the interchangeable lenses. I would like to buy the mount and lenses if you are willing to sell. SERIOUS BUYER.
We don't sell a DIY kit for this conversion as it's too difficult for most people to open the camera without causing damage. We have special equipment in-house for doing that. We do offer a conversion service if you already own your own camera. Details here: www.back-bone.ca/installation/
Unfortunately the Hero5/6/7 are too difficult to open without damaging the components, so a mod kit isn't available. We have special equipment in-house to do that. We do offer a conversion service for people who already own a compatible camera: www.back-bone.ca/installation/
Some of us are engineers and modify electronic equipment on a daily basis. The Hero's 5-7 are very easy to disassemble and modify. You should offer the kit alone with just a stipulation that the owner will void the warranty and/or possibly irreversibly damage the GoPro. Not quite fair that you're charging us a ton for a mod many of us can do and have all the equipment necessary. Could you please just offer the mod kit?
@@davidf1659 The CMOS sensor assembly on the Hero 5, 6 & 7 are single permanently glued assemblies. Even if you could separate the CMOS sensor from the assembly- you have no way to optically align the new component assemblies and accurately set the flange distance. It's not just about re-assembling individual components which was offered on the Hero 3 and Hero 4 cameras by BB.
@@@photoguru3786 Hi again yes I fully understand how every component of the hero cameras (now 5-8) are assembled, as well as where each component is manufactured outside of the US and then installed by GoPro engineers. Many of us engineers understand this fully. As for the CMOS sensors, they would not be touched. The mounting flange is just a custom perpendicularly bolted aluminum 12.5526 mm piece CNC milled to accept a CS-mount (or whatever adapter), then a regular lens. If the pro lens is heavy, obviously a support would be needed but all of this is very easy using minimal equipment. Still a shame you can't send us the kit. BTW look here: www.adrianololli.com/articolo.asp?ID=6481 -David F
I'm sorry, but I can't find any process for this modded version on the mobile version of your webpage, only for the Sony mod and for the lenses and lens adapters. Am I supposed to send you my GoPros all the way from Europe?
Hi, We don't sell a DIY kit for Hero5-8 as the waterproof construction makes it too difficult for most people to do themselves. If you contact our friends seesense.eu they can facilitate a conversion for you, or you can find a fully modified camera on their website
These cameras are too difficult for most people to open without causing damage hence we don't offer a DIY for them. We do offer an installation service however, if you already own a compatible camera www.back-bone.ca/installation/
@@trizzpat98 We don't really have any attachments for an off the shelf GoPro camera unfortunately, though we certainly wish that were possible! In order to fit other lens types over the original GoPro lens they would need to be placed several inches away and would likely result in severe vignetting. Our solution is to completely remove the original lens for the best possible results. It's possible to go wider angle like the GoPro MAX lens but adding zoom on top of a fisheye lens is difficult and would likely require too much glass to produce a good result.
@@dongerramarco9617 , STOP spreading FALSE information. Once the GoPro has been modified to this new lens mount it is NO longer water proof or even water resistant.
You could certainly use a telephoto lens from an SLR camera with a C-Mount adapter. We also typically recommend our Computar 25-135mm C-Mount lens for that type of shooting.
Do your products allow for more light input? I find my GoPro Hero 7 Black to be virtually unusable indoors, even when I play around with manual ISO, shoot in flat with extensive post-production, etc.
The stock GoPro lens is around f2.8 - Most C-Mounts will open wider than that - many up to f1.4 or f1.2. You can actually get significantly more light onto the sensor with the right lens.
@@BACKBONEca Sounds promising.. Though would love to see some proof of that before I believe it?! 😉. I mean the sensor size is what determine how much light it can collect. Lens or no lens on it? Prove me wrong!
@@JeffWelcherMedia Yes, that is how I understand it. I think this is a cool product, don´t get me wrong! Screwing on your favourite lens on an already awesome Gopro. Able to adjust zoom and depth-of-field etc. But to promise something to your customer that is just physically impossible is just plain wrong. @BACK-BONE - Would love to see you make a small demo-video of this claim?
Will you please suggest me some lenses and filters and some gears for GoPro hero 7 Black !!! I just bought this for traveling blog !! And i need some guidance .... thanks 🙏 😇🙏
Recommend a set of fixed focus M12 lenses so you can keep your rig compact and not have to worry about focus. Recommend our 2.7mm (superwide), 5.4mm (medium) and 7.2mm (narrow). Get an M12 adapter for each - focus them and lock them in. That way you can change the lens & adapter at the same time without losing your focus. You might also consider a set of ND filters! If you want to get some nice shots with blurred backgrounds etc, get a 16 or 25mm C-Mount lens and shoot with the iris opened up. Karma grip is a great gimbal for it when using M12's
@@adilrobot708 we usually shoot in protune mode @ 4K/30 or 24. In general we find these shooting settings the best: Protune ON, EV Comp -0.5, White Balance: Native, ISO Max 800, Sharpness Medium, Color Flat. You will need to grade the color in post with those settings but it will give you more freedom and a more cinematic look. If you're live streaming stick with the GoPro defaults. If the camera is on a tripod turn the stabilization off. For slow motion 4K/60 or 2.7K/120 are our faves.
There are ruggedized C-Mount lenses like Computar's MPW2-R line, but not waterproof that we're aware of: computar.com/product_series/78/Ruggedized%20Lens%20Series
Honestly we would love to, but the reality is we need special equipment to get the cameras open without damage, so a DIY kit would not be possible for people to do.
The wider the lens the better for hypersmooth. With wide angle lenses you can expect very smooth results. With medium/narrow lenses you can expect it to take out small vibrations but not the big bumps. This makes it possible to shoot handheld with great results with longer lenses than you could before!
Hi, thanks for that! Do you have something comparable for Sony FDR-X1000 action cam? I would be happy if I could compensate too wide angle and distortion of my cam. Or do you have a hint for me to solve this? Thanks in advance for your answer and kind regards
Hi, we don't have much experience with that particular camera unfortunately so I can't offer much advise. Currently the only Sony conversion we offer is for the RX0 / RX0 II - we make an MFT / C-Mount version of those cameras.
I'm doing that right now. It's easy to use a M12x0.5 to C-Mount and a C-Mount to whatever lens you have adapter. The focal distance fits quite well without modifying the Sony Cam. Buuuuuuuut: there is a massive crop factor of 5.2x! So my 28mm Canon EF lens turned into a 146 mm telephoto zoom lens. That might be good for wildlife video, but not for my purpose. Go and try that, if you are still into that topic. Just keep in mind that "zoom" factor.
If you are asking about stock 'unmodified' GoPro cameras the Sidearm mount that's shown is fully compatible with the Hero5, 6 & 7 Black as well as our modified versions. The lenses and filters depicted require a modified GoPro camera. All of our GoPro mods from the Hero3 Black and up are capable of using the same lenses, adapters and filter types, though the filter size varies depending on the camera model.
the focus problem could be solved using a smart phone as screen, is not that fast, of course, but now is important WHAT you want to do with this one. If 900 usd is the price, i find it too steep for the limitations it gives Vs. mortal people needs.
Yes the Hypersmooth works quite well. As a general rule the wider the lens the better for Hypersmooth. For medium/narrow FOV lenses you can expect it to take out vibration etc but not the big bumps. Makes it much easier to shoot handheld with longer lenses.
@@BACKBONEca I already own your older ones without hypersmooth, is probably about time for me to get a new one ^o^. Please keep working on your good product.
We recommend using a C-Mount with an adjustable iris that lets in lots of light. One of our favorite closeup/medium lenses for low light is this f2.0 16mm C-Mount: www.back-bone.ca/product/23-16mm-5mp-ultra-low-distortion/
Hello, we don't currently have a DIY conversion kit for the Hero5/6 & 7 but we do have a conversion service if you already own a compatible camera: www.back-bone.ca/installation/
The image sensor is moved forward during the conversion, so the original lens sits farther forward than before. As a result it will not fit in the Super Suit with a lens.
The GoPro's sensor is still 8-bit 4:2:0 or 4:1:1 color and recording is still H.264 right? Higher-end cameras will give you 10-bit 4:2:2 or 4:4:4 color and record in ProRes (for a lot more money of course).
Please tell me you've got a way to sell these to the UK market, will you?! I mean I'll be glad to help you out with re-selling your product here using my own chain of marketing. Let me know if you're interested!
There's no electrical connection between the lens and camera, so manual lenses are recommended. Canon and Nikon SLR lenses with a fully automatic iris can have manual control using one of our adapters.
@@Francisfphoto_ If you don't have a mechanical aperture ring on your EF lens you just need to get the right adapter. We offer a Canon EF adapter with a built in iris and mechanical control ring
We don't actually offer a DIY kit for GoPro 5/6/7/8/9 as it's very difficult for most people to open the cameras without causing permanent damage. We have special equipment that allows us to do that safely. In addition to selling complete ready to go cameras, we do offer an installation service for people who already own their own compatible cameras: www.back-bone.ca/installation/
I understand the reasoning behind this (basically using ANY camera and adapting it to your needs) but honestly, if you're working with something photography related, you're probably better off getting something like a D750 and modifying that, which may be even cheaper.
It's not about "using ANY camera and adapting it to your needs". This won't work on DSLR style cameras with much larger sensors. It's about having a small form factor camera that can be mounted to virtually ANY lens in the world (from a microscope to a telescope), recording quality 4K-30/60 and controlling your filters i.e. IR, NIR etc. It's like owning a dedicated screw driver for EVER application, or one screwdriver with interchangeable bits that does everything :) Yes, a DSLR camera with a full frame sensor will always outperform a modified Back-Bone camera in a straight photographic comparison.
PhotoGuru I understand what you mean, but if you're willing to spend enough money to modify a 500usd camera (idk how much the hero7 retails at now), you probably have access to other types of camera that could do the job better. I know I'm just speculating, and many people will surely use this as an alternative, but i just can't think of someone who is interested enough in photography not to have a dslr or a cheaper mirrorless or even a point and shoot they can use instead of this. Don't get me wrong, the possibilities this brings (being able to attach pretty much any lens) is amazing. I just can't get past what I mentioned earlier.
Our products aren't currently for sale on AliExpress but we do have resellers around the world. Check out our reseller map to find one near you: www.back-bone.ca/find-a-dealer/
The original GoPro doesn't have autofocus capability but uses a 'fixed focus' lens which is still possible after modding. For run and gun shooting, drones etc there are a wide variety of fixed focus M12 lenses that will give you ~0.5m - infinity. C-Mount & SLR lenses do require manual focusing which can be assisted with the GoPro app or a field monitor.
this is crazy, ive never been so amazed in my life to how usefull this can be
This is pretty cool. I'd be down to buy if I didn't care about the waterproof factor and didn't already invest in a GH5 + GoPro Hero 7 + G7 .
Have fun nailing focus on that tiny screen
Good point!
You can connect it to a phone or a tablet for a bigger screen
Exactly. You just don't want a manual lens while shooting videos unless focus hunting is the only thing you want to do everytime you record.
@@lmf868 If you have complete control over the subject and actions being filmed along with ample time to adjust push and pull, then sure,... but since that is usually not the case for average Joes like me then stick with a fast autofocus, aka a regular camcorder or late model Canon DSLR.
You can also directly connect live to any HDMI compatible device i.e a field monitor. The people buying these cameras are not using them like action cameras
I started watching the video like "XD okay, whatever, I'll make fun of it with my friends" but now I'm thinking about getting one. Not bad at all.
i didn't think there were interchangeable lens this tiny!
This is a crazy simple idea
Wow!
Ok, that's just about the coolest thing ever...
most c mount vintage lense were made for a 16mm film frame , which is larger than the go pro sensor, finding a good wide angle lens will be hard but I like your work
Correct, Bolex are largely 16mm format which results in a crop factor of roughly 2.05x on the GoPro. 10, 12 & 13mm Bolex lenses are relatively common for around $100 and provide a medium/wide field of view. Wide 8mm & 5.5mm are also available but usually cost a bit more. D-Mount, which is largely designed for 8mm film is pretty much a perfect match for the sensor size in the GoPro and results in a crop factor of almost 0. We sell a simple adapter ring for those lenses as well. Here's a link to a video shot with vintage Bolex & D-Mount on one of our Hero4 mods which has the same sensor size as the Hero7: ruclips.net/video/Cxg1kGUnkhg/видео.html
Can I buy kit to convert my camera myself on 7 black
I think so...can buy where
nice update to Hero7
that is AMAZING, apart from the fact there's no auto focusing of course.
Auto focus never works anyway. Pros always use manual focus.
@@MrPisster no they dont
@@nielsieoiets Name one Hollywood film that has used auto-focus?
Amazing video! I'm super excited about getting one of these cameras!
These products look really interesting...I could make a lot more short films for RUclips if I had the additional flexibility.
Ron Jeremy said the same
@@PapaWheelie1 😂
I LOVE THIS, going to take a look now. BOOM there goes my credit card 👍🏻🤣
If it would be cheap, it would be nice for traveling.
Cool but how does it affect dynamic range/ low light situation? I think sensor size matters most.
same question here. low light is the biggest drawback of the hero.
The BB modification doesn't change the physical capabilities of the GoPro CMOS sensor. However, larger lenses do culminate more light onto an equal square area of the sensor so you have some added capabilities by using different lenses vs. the very small stock GoPro M12 lens. In the end- the biggest advantage to a Back-Bone modified GoPro camera isn't the improvement to their sensors low-light capabilities.
The only reason why you might want to use this is if you want to set it somewhere steady and lets it film without the need to change focus etc, and that is because this is a tiny camera and has 4k60fps which many more expensive cameras don't have. And that microscope attachment is pure gold. I can find many reason why this has a reason to exist (Hero8 also has mods).
BUT If you are an average user and you want to use it as a good camera then forget about it, the price of this is close to professional cameras that can do a lot more for the said price and if you want you can add a little bit more and get yourself an even more professional camera. The Hero8 is 849USD already and there are cameras that has far more options for video than this. Remember that GoPro is an action camera and the company gives focus to this.
IF gopro ever makes this by default and offers auto focus then they will kill the market for sure. For 849USD and auto focus with the GoPro artificial intelligence and ultra smooth stabilization, people would be running for their money. The only next reasonable purchase would be a bmpcc4k because of the higher bitrate and higher sensor.
The future is now.
what makes you think I will buy H7Pro while I already have Hero 7 Black? All I need is the c-mount and other mounts with the interchangeable lenses. I would like to buy the mount and lenses if you are willing to sell. SERIOUS BUYER.
We don't sell a DIY kit for this conversion as it's too difficult for most people to open the camera without causing damage. We have special equipment in-house for doing that. We do offer a conversion service if you already own your own camera. Details here: www.back-bone.ca/installation/
What's the timeline for the mod kit for those of us who already own the 5/6/7?
Unfortunately the Hero5/6/7 are too difficult to open without damaging the components, so a mod kit isn't available. We have special equipment in-house to do that. We do offer a conversion service for people who already own a compatible camera: www.back-bone.ca/installation/
Some of us are engineers and modify electronic equipment on a daily basis. The Hero's 5-7 are very easy to disassemble and modify. You should offer the kit alone with just a stipulation that the owner will void the warranty and/or possibly irreversibly damage the GoPro. Not quite fair that you're charging us a ton for a mod many of us can do and have all the equipment necessary. Could you please just offer the mod kit?
@@davidf1659 The CMOS sensor assembly on the Hero 5, 6 & 7 are single permanently glued assemblies. Even if you could separate the CMOS sensor from the assembly- you have no way to optically align the new component assemblies and accurately set the flange distance. It's not just about re-assembling individual components which was offered on the Hero 3 and Hero 4 cameras by BB.
@@@photoguru3786 Hi again yes I fully understand how every component of the hero cameras (now 5-8) are assembled, as well as where each component is manufactured outside of the US and then installed by GoPro engineers. Many of us engineers understand this fully. As for the CMOS sensors, they would not be touched. The mounting flange is just a custom perpendicularly bolted aluminum 12.5526 mm piece CNC milled to accept a CS-mount (or whatever adapter), then a regular lens. If the pro lens is heavy, obviously a support would be needed but all of this is very easy using minimal equipment. Still a shame you can't send us the kit. BTW look here: www.adrianololli.com/articolo.asp?ID=6481
-David F
@@BACKBONEca do you guys have any attachments for the hero 9? I'd love to control optical zoom and focus on my hero 9.
I'm sorry, but I can't find any process for this modded version on the mobile version of your webpage, only for the Sony mod and for the lenses and lens adapters. Am I supposed to send you my GoPros all the way from Europe?
Hi, We don't sell a DIY kit for Hero5-8 as the waterproof construction makes it too difficult for most people to do themselves. If you contact our friends seesense.eu they can facilitate a conversion for you, or you can find a fully modified camera on their website
Can you do the same for osmo action if it isn’t
Current priority is to mod Hero8, then we'll take a look :-)
Do they not offer just the lens kits for the diyers? I don't need an entirely new camera.
These cameras are too difficult for most people to open without causing damage hence we don't offer a DIY for them. We do offer an installation service however, if you already own a compatible camera www.back-bone.ca/installation/
This is sick !! I just ordered the 8 . Wasn’t sure what to do with the 7 . This looks insane !! Why is this only being done now ???
The H7PRO has already been out for a year :-) we've modded every GoPro since Hero3 Black. Dev starting shortly on the 8.
@BACK-BONE do you guys have any attachments for the hero 9? I'd love to control optical zoom and focus on my hero 9.
I would love to buy one of your modded hero 9s, but I was hoping you have some attachments that fit a regular one.
@@trizzpat98 We don't really have any attachments for an off the shelf GoPro camera unfortunately, though we certainly wish that were possible! In order to fit other lens types over the original GoPro lens they would need to be placed several inches away and would likely result in severe vignetting. Our solution is to completely remove the original lens for the best possible results. It's possible to go wider angle like the GoPro MAX lens but adding zoom on top of a fisheye lens is difficult and would likely require too much glass to produce a good result.
Do you plan on making something similar for the iPhone 12 Pro Max?
It might be possible but it's not something we're currently working on - but you never know ;-)
Pretty damn cool. But I can't afford it at all.
900 bucks
That looks so cool
Oh.New idea for Gopro 👍👍👍👍
i wish they release this on gopro 8.
Dope project!!
Is there a cheaper lens I can buy for my normal gopro hero 7
Great gear, brotha!. But i should think twice of the price. 👍👍👍
after talking so much, one question... Is it waterproof tho
Great question
...not hard to guess the answer to waterproof is NO. What vintage lens or current lens are water proof...NONE!
The H7PRO is not designed to be waterproof as the image sensor is now exposed - similar to a mirrorless camera.
up to 100meters
@@dongerramarco9617 , STOP spreading FALSE information. Once the GoPro has been modified to this new lens mount it is NO longer water proof or even water resistant.
Hi, has the gopro7 or 8 an ir filter originally attached to it's lens?
in the Gopro Hero4/5/6/7 the IR blocking filter is built into the lens. On the Hero8 it is attached to the image sensor
What about the go pro hero 9 can I send mine in?
what you going to do now they Changed the form of new 7 black to the same as the 8 ????
Which lens do you think will be suitable for videoing wildlife? The subject can be very far at times
You could certainly use a telephoto lens from an SLR camera with a C-Mount adapter. We also typically recommend our Computar 25-135mm C-Mount lens for that type of shooting.
@@BACKBONEca Honestly thank you cause I was lost and wondering if made the wrong purchase.. And are these available for the hero 9?
@@katherine.j4077 We'll have a modified version of the Hero9 available shortly that will also allow the use of MFT lenses
@@BACKBONEca Awesome!! Thank you..
Do your products allow for more light input? I find my GoPro Hero 7 Black to be virtually unusable indoors, even when I play around with manual ISO, shoot in flat with extensive post-production, etc.
Doubt it, the camera sensor is still Gopro.
The stock GoPro lens is around f2.8 - Most C-Mounts will open wider than that - many up to f1.4 or f1.2. You can actually get significantly more light onto the sensor with the right lens.
@@BACKBONEca Sounds promising.. Though would love to see some proof of that before I believe it?! 😉. I mean the sensor size is what determine how much light it can collect. Lens or no lens on it? Prove me wrong!
@@truenorth365 Correct. You'd just be doubling the exposure, not changing the F stop, right?
@@JeffWelcherMedia Yes, that is how I understand it. I think this is a cool product, don´t get me wrong! Screwing on your favourite lens on an already awesome Gopro. Able to adjust zoom and depth-of-field etc. But to promise something to your customer that is just physically impossible is just plain wrong. @BACK-BONE - Would love to see you make a small demo-video of this claim?
Can you tell me about stabilizing camera lense
Are you doing the hero 8? I have a 300mm lense I'd love to use.
this is sick, man!
Cool idea, video well made
Will you please suggest me some lenses and filters and some gears for GoPro hero 7 Black !!! I just bought this for traveling blog !! And i need some guidance ....
thanks 🙏 😇🙏
Recommend a set of fixed focus M12 lenses so you can keep your rig compact and not have to worry about focus. Recommend our 2.7mm (superwide), 5.4mm (medium) and 7.2mm (narrow). Get an M12 adapter for each - focus them and lock them in. That way you can change the lens & adapter at the same time without losing your focus. You might also consider a set of ND filters! If you want to get some nice shots with blurred backgrounds etc, get a 16 or 25mm C-Mount lens and shoot with the iris opened up. Karma grip is a great gimbal for it when using M12's
BACK-BONE thanks for suggestions brother !! What is the best setting for video and slow motion for GoPro 7 Black ???
@@adilrobot708 we usually shoot in protune mode @ 4K/30 or 24. In general we find these shooting settings the best: Protune ON, EV Comp -0.5, White Balance: Native, ISO Max 800, Sharpness Medium, Color Flat. You will need to grade the color in post with those settings but it will give you more freedom and a more cinematic look. If you're live streaming stick with the GoPro defaults. If the camera is on a tripod turn the stabilization off. For slow motion 4K/60 or 2.7K/120 are our faves.
BACK-BONE thanks a lot dear brother !!! 🙏😇🙏
BACK-BONE ruclips.net/video/uMrMlh_BU4c/видео.html
Our RUclips channel !!
Are there any weather sealed C mount lenses out there?
There are ruggedized C-Mount lenses like Computar's MPW2-R line, but not waterproof that we're aware of: computar.com/product_series/78/Ruggedized%20Lens%20Series
why do you all not sell the diy kit?
Honestly we would love to, but the reality is we need special equipment to get the cameras open without damage, so a DIY kit would not be possible for people to do.
How do different lens affect the Hypersmooth?
The wider the lens the better for hypersmooth. With wide angle lenses you can expect very smooth results. With medium/narrow lenses you can expect it to take out small vibrations but not the big bumps. This makes it possible to shoot handheld with great results with longer lenses than you could before!
@@BACKBONEca www.taobao.com Please run your own store here and you will get a lot of money. I am a consumer from China.
Will you guys prepare any mods for the Hero 8 (either in the camera or as a clip-on solution)? Thanks!
The H8PRO is now available for pre-order on our website www.back-bone.ca
Already had the gopro7 how much is it for just the kit???
Wait, is this actually real?
No 😂
Yes www.back-bone.ca/product/h7pro/
does it match to DJI osmo action cam and GoPro Hero 8 black?
Hi, thanks for that! Do you have something comparable for Sony FDR-X1000 action cam? I would be happy if I could compensate too wide angle and distortion of my cam. Or do you have a hint for me to solve this? Thanks in advance for your answer and kind regards
Hi, we don't have much experience with that particular camera unfortunately so I can't offer much advise. Currently the only Sony conversion we offer is for the RX0 / RX0 II - we make an MFT / C-Mount version of those cameras.
I'm doing that right now. It's easy to use a M12x0.5 to C-Mount and a C-Mount to whatever lens you have adapter. The focal distance fits quite well without modifying the Sony Cam.
Buuuuuuuut: there is a massive crop factor of 5.2x!
So my 28mm Canon EF lens turned into a 146 mm telephoto zoom lens. That might be good for wildlife video, but not for my purpose.
Go and try that, if you are still into that topic. Just keep in mind that "zoom" factor.
@@smartintech2 many thanks, that's promising!
Is there any plan to make this work on a GoPro 9 ?
absolutely! The H9PRO will be unveiled very soon. It will have M12, CS and C-Mount as well as a new removable MFT mount for manual lenses.
@@BACKBONEca amazing, thanks
for gopro 8?
Which of all these products fit hero 7 black if any? I see previous GoPros mentioned on the website...4 ,5....?
If you are asking about stock 'unmodified' GoPro cameras the Sidearm mount that's shown is fully compatible with the Hero5, 6 & 7 Black as well as our modified versions. The lenses and filters depicted require a modified GoPro camera. All of our GoPro mods from the Hero3 Black and up are capable of using the same lenses, adapters and filter types, though the filter size varies depending on the camera model.
I need one for surf photo underwater.. what can I use?
Once we do our mod the camera body is no longer waterproof. In your case the original waterproof GoPro would work best.
Where do I get that!!!?
Is it available in Indonesia?
Do you have a mod for the GoPro 7 Silver?
We only developed one for the Black version, sorry about that!
It would be really good idea to place the link on the web to buy these lenses... no se... solo mi opinion...
The lenses we carry can be found at this link, but of course you can use any C-Mount lens and more! www.back-bone.ca/product-category/lenses/
What about its water resistance? Is its still 10m waterproof?
The camera is no longer water proof after the modification as we must remove the original lens and expose the image sensor.
the focus problem could be solved using a smart phone as screen, is not that fast, of course, but now is important WHAT you want to do with this one.
If 900 usd is the price, i find it too steep for the limitations it gives Vs. mortal people needs.
Does the stabilisation works?
Absolutely. The camera continues to behave like the original GoPro, but with the option of interchangeable lenses.
Yes the Hypersmooth works quite well. As a general rule the wider the lens the better for Hypersmooth. For medium/narrow FOV lenses you can expect it to take out vibration etc but not the big bumps. Makes it much easier to shoot handheld with longer lenses.
@@BACKBONEca I already own your older ones without hypersmooth, is probably about time for me to get a new one ^o^.
Please keep working on your good product.
For night shoot, which len is best suited for Mod G7?
We recommend using a C-Mount with an adjustable iris that lets in lots of light. One of our favorite closeup/medium lenses for low light is this f2.0 16mm C-Mount: www.back-bone.ca/product/23-16mm-5mp-ultra-low-distortion/
Can i send you the Hero7 and you mount it or can you send me your Adapter for self-mounting?
Hello, we don't currently have a DIY conversion kit for the Hero5/6 & 7 but we do have a conversion service if you already own a compatible camera: www.back-bone.ca/installation/
waterproof???
Woow... this is a good innovation.
Can you still use the waterproof case with small/original lens
Axel Edwards nope
The image sensor is moved forward during the conversion, so the original lens sits farther forward than before. As a result it will not fit in the Super Suit with a lens.
Fraction of the cost
Run in GoPro 8 ?
is this available for the her go pro 10?
Yes, we have similar mods available for Hero4 up to Hero10. Info here: www.back-bone.ca
The GoPro's sensor is still 8-bit 4:2:0 or 4:1:1 color and recording is still H.264 right? Higher-end cameras will give you 10-bit 4:2:2 or 4:4:4 color and record in ProRes (for a lot more money of course).
The only answer I have is that the GoPro supports H.265, for what it's worth to you lol.
Woooowwww!!! This is awesome!
Please tell me you've got a way to sell these to the UK market, will you?!
I mean I'll be glad to help you out with re-selling your product here using my own chain of marketing. Let me know if you're interested!
Are these lenses compatible with the Hero 7 Silver?
Our components are compatible with the hero 7 black only. The Silver has different dimensions and internal structure
GoPro should buy you guys 😎
Do you lose autofocus for most lenses?
There's no electrical connection between the lens and camera, so manual lenses are recommended. Canon and Nikon SLR lenses with a fully automatic iris can have manual control using one of our adapters.
How do you control your aperture???
aperture adjustments are performed manually on the lens
BACK-BONE I can’t adjust aperture on my EF lens
@@Francisfphoto_ If you don't have a mechanical aperture ring on your EF lens you just need to get the right adapter. We offer a Canon EF adapter with a built in iris and mechanical control ring
Went to the site to find a kit to modify the Hero 7 Blacks I already own, but nada. Anyone else run across them or is a DIY kit just a unicorn?
We don't actually offer a DIY kit for GoPro 5/6/7/8/9 as it's very difficult for most people to open the cameras without causing permanent damage. We have special equipment that allows us to do that safely. In addition to selling complete ready to go cameras, we do offer an installation service for people who already own their own compatible cameras: www.back-bone.ca/installation/
@@BACKBONEca Fantastic. Thanks!
Can film Night time footage
Holy crap!!! That’s awesome!!!!!
Now there is 360R now
That’s unreal!!!
Do these work for go pro hero 7 silver?
Just the Black model I'm afraid. The Silver and White models have much smaller image sensors so we decided to concentrate only on the Black
Quero uma Gopro hero 7 Black mas não tenho condições financeiras para isso 😟
I understand the reasoning behind this (basically using ANY camera and adapting it to your needs) but honestly, if you're working with something photography related, you're probably better off getting something like a D750 and modifying that, which may be even cheaper.
It's not about "using ANY camera and adapting it to your needs". This won't work on DSLR style cameras with much larger sensors.
It's about having a small form factor camera that can be mounted to virtually ANY lens in the world (from a microscope to a telescope), recording quality 4K-30/60 and controlling your filters i.e. IR, NIR etc. It's like owning a dedicated screw driver for EVER application, or one screwdriver with interchangeable bits that does everything :)
Yes, a DSLR camera with a full frame sensor will always outperform a modified Back-Bone camera in a straight photographic comparison.
PhotoGuru I understand what you mean, but if you're willing to spend enough money to modify a 500usd camera (idk how much the hero7 retails at now), you probably have access to other types of camera that could do the job better.
I know I'm just speculating, and many people will surely use this as an alternative, but i just can't think of someone who is interested enough in photography not to have a dslr or a cheaper mirrorless or even a point and shoot they can use instead of this.
Don't get me wrong, the possibilities this brings (being able to attach pretty much any lens) is amazing. I just can't get past what I mentioned earlier.
I'm looking for customized Go pro 8 :)
Just my tought 😉😂 ...but i heard the 8 has a fixed body.
Making more difficult i'm guessing
@@Metaldetectiontubeworldwide Oops ... But anyways there must be someway to improve the lenses right? like accessories?
@@LongNguyen-ik5rx let's hope 😉 ...maybe they can get around with it some sort of cage for it ...🙌
What about the new gopro?
Dev starting shortly!
@@BACKBONEca would be awesome to be able to some how use micro 4/3 lenses.
i really like it, i checked the shop, but it's too expensive, i regret it😢
I would not trust mounting those huge lens on a gopro designed for tiny lens,but its a good idea if it works,looks expensive
We recommend using a lens support for long lenses or lenses heavier than 500g (1.1 lbs)
A 4 ounce swallow cannot carry a 1 lbs coconut 'Monty Python and the Holy Grail'.
So you support the coconut, not the swallow.
Any link on Aliexpress?
Our products aren't currently for sale on AliExpress but we do have resellers around the world. Check out our reseller map to find one near you: www.back-bone.ca/find-a-dealer/
Baby dslr is born 🐥
Is it working with Osmo Action?
We haven't developed a mod for that camera yet. Currently we modify Hero4/5/6/7 and Sony RX0 / RX0 II
@@BACKBONEca ok, thanks for reply
Do they make this for Hero 5 black ?
Hero 5 is also available. We've modded every GoPro Black edition since hero 3
Is it still waterproof?
duhhhhh.........NO!!!!!
So this is a kit for the 7?
We sell them as complete cameras or offer an installation service for people that already own a compatible Hero5, 6 or 7 camera
@@BACKBONEca how much is just kit for 7
why the annoying disco??
Wait what?
The only downside is no autofocus. :(
The original GoPro doesn't have autofocus capability but uses a 'fixed focus' lens which is still possible after modding. For run and gun shooting, drones etc there are a wide variety of fixed focus M12 lenses that will give you ~0.5m - infinity. C-Mount & SLR lenses do require manual focusing which can be assisted with the GoPro app or a field monitor.
The best photographs knowns to man where taken on manual focus systems before auto focus existed. Dont be lazy.
@@floatingrabbit3556 It's great for photos but for videos, vlogs, it's really hard to make.
Where can I buy one in the uk please
www.seesense.eu