You saved the day with this one, bro. Woke up to this regen condition this morning after idling. Just finished parked regen following your instructions. Saved me an embarrassing call to dispatch and I can get on with my next delivery. Thank you.
Dude you saved the day with this video! I had pressed that button before at different times trying to see what it did and I figured it was just a placeholder button after doing nothing each time but it totally worked for this. Thank you man! I put LEDs in my truck as well and love em!
Bro...this shit just happemed to me!!! I'll leave a comment on what exactly happened and what i did.... I have a 2023 cascadia with 53,000 miles. Been with the company a week. Was idling with a windex bottle shoved by the fuel pedal to keep it from shutting off. Well the regen light came on. Then the check engine light. Soot level on dash was fine. Then after about 2 hours of idling the red stop engine light came on and the shutdown counter started. So i went through the menu and started a regen. 1 hour passed and still doing a regen. Did one again. Same thing, over 1 hour and not stopping. Found this video...i listened carefully and started the truck...after hitting the overide button for idk 5 minutes and/or probably 30 times the rpms raised up and it held rpm and did a regen for about 10 minutes!!!! All of a sudden the rpms drop...and all the lights go out!!! Thanks so much for this! I would have said screw it and called dispatch but i figured I'd give it a try and by hell it worked!
Man I appreciate you so much it definitely worked this new idle system on the freitliners are such a headache especially if you have to sit somewhere cold I wasn’t trying to call another tow truck and what’s crazy is if you call a mechanic they’ll tell you they can’t do anything so you gotta be towed to dealership smfh
Yup, definitely worked for me. Everytime when the seconds would run down, truck would shut down. Couldn't figure it out until I saw ur video bro. I kept pushing the override button 10-20 times every 2 minutes so the countdown would reset and not allow it to shut the truck off during regent. Definitely works. Thanks bro
This just happened to me!!! I watched the video and read your comment and kept hitting the button until it started a regen and kept hitting it until it was done. Was about 10 minutes after 3 hours of bullshit waiting for it to do one itself.
Sitting in the yard, mechanic says I need a "Parked Regen"... resetting the shutdown timer keeps the truck running but not necessarily in parked regen mode... The mechanic showed me how to go to the dashboard menu, go over and select "truck" icon menu, go down to the "Diesel Particulate Filter" DPF icon and press "OK" to start the parked regen mode... My mechanic says it can take anywhere from 30 minutes to 1.5 hours depending on how long the truck has been sitting or running without a regen being run periodically...
I was idling doing a 34 hour reset when my shit went bonkers. I tried 2 regens that way for 1 hour, then 2 hours and the truck never finished a regen and went ino shutdown/derate mode. I turned the truck off, cycled the power, stumbled across this video and after hitting the override button for 5 minutes it finally did a regen that way for probably 8 to 10 minutes and was fine!
I tried doing what the video said and it didn’t work until I read this guys comment went to the truck settings clicked ok and it started right up. I tried to go back to the override page so the truck didn’t shutdown but it was gone and never shutdown on me. This worked just going into the settings when it’s in “Engine Protection”mode and it’s counting down. I guess reading some of the other comments there’s another warning mode that’s engine shutdown/derate mode. So im guessing the process in the video seems to work only when it’s in the shutdown/derate mode.
I was about to do this but i wad parked doing a 34 when i did 2 regens and it wouldn't stop after 3 hours. Did the override button trick for about 5 to 7 minutes and finally the rpms raised and it did a regen for 10 minutes and all the lighrs went off. If it happens again try doing that.
Same issue with my Freightliner 2022 . Regen cuts off and this message pops up . We are trying it to override this message to see if it is completes the whole regeneration
Stuck at Atlanta I hope it will works. Have all lights on dashboard. Both yellow engine lights plus stop in engine light, after treatment. It was not letting me do manual regen as the soot level was good and green. Follow your video and keep pressing the override button again again from last 15 minutes it's started regen after a few minutes. Hopefully it will finish and work. Thanks
Definitely just worked for me you Definitely saved the day I didn't know what was going on when I woke up went to RUclips found the solution applied the math = problem solved...
I'll also add that if this happens to you and you're in shutdown mode DO NOT go into the dashbaord and click on a regen and start one that way. I hit the engine override button over and over for 5 to 7 minutes and it finally took off and raised the rpms and did another regen. This time the engine ran more rough and i didn't sit there for an hour. Idk what it does but if you have the check engine lights flashing and you're in shutdown/derste mode, stay calm and keep hitting the override button until it starts a regen that way.
@@Trucker_Smooth_ We gave up and called Ryder. The tech on the line said some new Freightliners have a software issue. I'll probably just wind up switching to another Day Cab.
I just wanted to comment because I ran into this issue on my 2022 cascadia ....and was able to fix it by using this button and it took me about 3 Regens for my code to clear ...
Can’t read the dash, and your finger covered the icon on the button that you said to push. I have a 2022 Cascadia, and my dash is not set up like yours. So being able to actually SEE what you’re referring to would be helpful.
Parked the truck..applied breaks...and started the regen..it didnt work the first time but i tried a few more times and it let me ..what i learned was that it wont let you perform a manual regen until it really really needs it...
All you have to do is hit the back button. Turn off the engine. Turn it back on and immediately go into the regen screen and hit OK. No need to hit that button every couple minutes
I’ve did that right before this video and took off my battery cables once I turned everything back on that shut down number still come on so that button I’m pressing is to keep resetting the count down to allow the regen
My truck just did this and hitting the override button and resetting the clock for a few minutes made it do a regen that way and finally all my lights went off and i wasn't in shutdown mode once the regen was done.
I am resting for more than 4 hours but doesn't work and I call Love service they make forcing regen . but I appreciate what you did to help others keep doing it .
If this video helped you out I would gladly appreciate it if you hit the subscribe button but I won’t turn down a tip 😂😂 $farigang2200
You saved the day with this one, bro. Woke up to this regen condition this morning after idling. Just finished parked regen following your instructions. Saved me an embarrassing call to dispatch and I can get on with my next delivery. Thank you.
Dude you saved the day with this video! I had pressed that button before at different times trying to see what it did and I figured it was just a placeholder button after doing nothing each time but it totally worked for this. Thank you man! I put LEDs in my truck as well and love em!
Bro...this shit just happemed to me!!!
I'll leave a comment on what exactly happened and what i did....
I have a 2023 cascadia with 53,000 miles. Been with the company a week. Was idling with a windex bottle shoved by the fuel pedal to keep it from shutting off. Well the regen light came on. Then the check engine light. Soot level on dash was fine. Then after about 2 hours of idling the red stop engine light came on and the shutdown counter started. So i went through the menu and started a regen. 1 hour passed and still doing a regen. Did one again. Same thing, over 1 hour and not stopping. Found this video...i listened carefully and started the truck...after hitting the overide button for idk 5 minutes and/or probably 30 times the rpms raised up and it held rpm and did a regen for about 10 minutes!!!! All of a sudden the rpms drop...and all the lights go out!!! Thanks so much for this! I would have said screw it and called dispatch but i figured I'd give it a try and by hell it worked!
You just saved my life, I was stuck here in Dallas Downtown..This video is so precious to me. God bless you brother 🙏
Glad The video helped you out
Bro I'm going through the same thing as well speak. Thank you soooooo much. Be safe out there 🤘🏻
Man I appreciate you so much it definitely worked this new idle system on the freitliners are such a headache especially if you have to sit somewhere cold I wasn’t trying to call another tow truck and what’s crazy is if you call a mechanic they’ll tell you they can’t do anything so you gotta be towed to dealership smfh
Yup, definitely worked for me. Everytime when the seconds would run down, truck would shut down. Couldn't figure it out until I saw ur video bro.
I kept pushing the override button 10-20 times every 2 minutes so the countdown would reset and not allow it to shut the truck off during regent.
Definitely works.
Thanks bro
This just happened to me!!! I watched the video and read your comment and kept hitting the button until it started a regen and kept hitting it until it was done. Was about 10 minutes after 3 hours of bullshit waiting for it to do one itself.
Sitting in the yard, mechanic says I need a "Parked Regen"... resetting the shutdown timer keeps the truck running but not necessarily in parked regen mode... The mechanic showed me how to go to the dashboard menu, go over and select "truck" icon menu, go down to the "Diesel Particulate Filter" DPF icon and press "OK" to start the parked regen mode... My mechanic says it can take anywhere from 30 minutes to 1.5 hours depending on how long the truck has been sitting or running without a regen being run periodically...
Did that work?
This works! Thanks to both you and the guy making the video
I was idling doing a 34 hour reset when my shit went bonkers. I tried 2 regens that way for 1 hour, then 2 hours and the truck never finished a regen and went ino shutdown/derate mode. I turned the truck off, cycled the power, stumbled across this video and after hitting the override button for 5 minutes it finally did a regen that way for probably 8 to 10 minutes and was fine!
Thank you for this !
I tried doing what the video said and it didn’t work until I read this guys comment went to the truck settings clicked ok and it started right up. I tried to go back to the override page so the truck didn’t shutdown but it was gone and never shutdown on me. This worked just going into the settings when it’s in “Engine Protection”mode and it’s counting down. I guess reading some of the other comments there’s another warning mode that’s engine shutdown/derate mode. So im guessing the process in the video seems to work only when it’s in the shutdown/derate mode.
I appreciate you my man definitely helping me out this morning 👍👍🙏🏽👍👍
Thanks worked for me took 15- 20 mins. Didn't have to go to shop this morning about to roll.
Man bro this video saved me some money and headache I almost got got aa we say in Miami 😆 thank you definitely saved me money and my weekend
Bro you just saved me. Thanks a lot. 🙏🏾🙏🏾🙏🏾🙏🏾
Thanks bruh you helped me out a lot
💯💯 glad to help
Thank you trucker smooth it work perfect for me .. I just kept pressing the override bottom .. I did it parked all light went off thank you again
How long did it take??
@@spadebrooks9285 it took around 10 to 15 minutes.. I never had that problem again
It worked I was in Florida and it happen and this worked 💪 thanks
Man I just did that and work thank you so much
This video help me,thank you so much ❤
Oh man thank you so much it helped me I save more than $ 2000 thanks again
Omg it worked thank you so much
Thanks bro it really helps
You're a life saver 🙌
How long did it take for it to complete?
It works . Thanks bro
It worked thank you trucker smooth
Thank you bro great video. Trying to leave this damn company and truck wouldn't start. New job waiting on me damn truck trying to get me sit here.
Dang bro
Saved my life🙏🏼
Omg this video saved me..... mines was doing the same thing just now
Thank you brother you save me good video
Another driver saved thank you so much.
Bro this video made my day I was 6 hours from home with a full load and must have pressed that button 600 times 😂😂
😂😂😂😂😂 it did the job
I was about to do this but i wad parked doing a 34 when i did 2 regens and it wouldn't stop after 3 hours. Did the override button trick for about 5 to 7 minutes and finally the rpms raised and it did a regen for 10 minutes and all the lighrs went off. If it happens again try doing that.
Yes it’s working out thank you 🙏🏾
Damn dude it just happen to me thanks for the help.
Glad to help
Same issue with my Freightliner 2022 . Regen cuts off and this message pops up . We are trying it to override this message to see if it is completes the whole regeneration
Definitely appreciate this bro, I’m currently in NC now as we speak on the side of the road because of this exact problem
Glad to help keep pressing the button should get you somewhere safe
Stuck at Atlanta I hope it will works.
Have all lights on dashboard. Both yellow engine lights plus stop in engine light, after treatment. It was not letting me do manual regen as the soot level was good and green.
Follow your video and keep pressing the override button again again from last 15 minutes it's started regen after a few minutes. Hopefully it will finish and work.
Thanks
Hope it works for you
Oh my goodness you saved me today thank you thank you thank you thank you! Please be safe out there brother
Glad I could help
Bro I'm literally doing this rn hopefully it works for me 🙏🏽
Override works great, but soot level is good, truck regened 5+ times and lights and shutdown mode is still active.
The same problem happened to me on Cascadia 22… All was sudden and even I had the same level of fuel and DEF.
Thank bro appreciate!! U just save my sorry ass.
Definitely just worked for me you Definitely saved the day I didn't know what was going on when I woke up went to RUclips found the solution applied the math = problem solved...
Hi , thank you , it is worked … 👍👍👍👍😎😎😎😎😁😎😁
My problem is it’s saying parked regen active but it’s been resending for 2 hours. I’m scared to stop the regen.
This saved me
I'll also add that if this happens to you and you're in shutdown mode DO NOT go into the dashbaord and click on a regen and start one that way. I hit the engine override button over and over for 5 to 7 minutes and it finally took off and raised the rpms and did another regen. This time the engine ran more rough and i didn't sit there for an hour. Idk what it does but if you have the check engine lights flashing and you're in shutdown/derste mode, stay calm and keep hitting the override button until it starts a regen that way.
I did it this way but still doesn't let the regen finish I keep pressing override to Reset time but then it still stops it
@@christianmonsivais don't access the regen through the screen...just hit the overide button until it starts a regen that way
So if i do a pared regen it wil clear them
How did you get you truck to Regen
Pressing what number ??
brother can you leave a comment what was the exact problem they found out?
I have the same problem but I had to get my tractor towed to the dealership... Did the Regen worked you you had to have someone take a look ?
Yea it worked for me I was able to get to the dealership for them to look at it
I think it worked.
Hey. How long does the regen suppose to last. I did a parked regen on 2022 Cascadia Frieghtliner and after 2 an half hours it's still regening ? WTF
It’s probably to far gone you gotta go to the dealership
I have these lights flashing with hot exhaust light it’s catching regen but it is not clearing the lights
It is working so far it started a regeneration I just have to keep pressing the button. Did it work for you?
No I still had to take it to the shop to turn off the check engine light
Bro I read yo comment then decided to hold it then it worked thanks fam
I did this Regen finished but it wont end the shutoff
Tried to get Regen going and it is locked into Low RPMs instead of high. Strangely, whatever it's doing has the temp running really hot.
Maybe if you temp is too high it might not regen
@@Trucker_Smooth_ We gave up and called Ryder. The tech on the line said some new Freightliners have a software issue. I'll probably just wind up switching to another Day Cab.
Yea man it’s a lot of issues with them I get a lot of messages
I just wanted to comment because I ran into this issue on my 2022 cascadia ....and was able to fix it by using this button and it took me about 3 Regens for my code to clear ...
Glad you got it done
Can’t read the dash, and your finger covered the icon on the button that you said to push. I have a 2022 Cascadia, and my dash is not set up like yours. So being able to actually SEE what you’re referring to would be helpful.
its working for me..keep trying a few times
Hey buddy,
Can you please tell me that how did you perform regen?
Parked the truck..applied breaks...and started the regen..it didnt work the first time but i tried a few more times and it let me ..what i learned was that it wont let you perform a manual regen until it really really needs it...
I'm doing this more than 1hour and 40 minutes now
For How long should I do it?
It should of been finished by now take it to the dealership
Oh for the days of just jamming gears and driving and having a regular maintenance schedule.
All you have to do is hit the back button. Turn off the engine. Turn it back on and immediately go into the regen screen and hit OK. No need to hit that button every couple minutes
I’ve did that right before this video and took off my battery cables once I turned everything back on that shut down number still come on so that button I’m pressing is to keep resetting the count down to allow the regen
My truck just did this and hitting the override button and resetting the clock for a few minutes made it do a regen that way and finally all my lights went off and i wasn't in shutdown mode once the regen was done.
Saved my ass today I was about to quit I hate these new trucks lol
😂😂glad I can help
@@Trucker_Smooth_ I am resetting for more than 2 hours but still doesn't work
@@user-hm5pl1rx6w yea your going to have to still take it to the dealership
I am resting for more than 4 hours but doesn't work and I call Love service they make forcing regen . but I appreciate what you did to help others keep doing it .
@@user-hm5pl1rx6w how did they do that?
Did it work out for you?
Does anyone know if this worked
No still had to take it to the shop
@@Trucker_Smooth_ did you find out what the issue was?
@@daiviontaylor yes it was a valve flash issue caused the truck not to regenerate basically the valves are to weak
Broo you awake? Im looking for this an see you posting. Call me pendejo its chino
Ha None of these Truck🚚s are Not New😅
These new frightliner are trash Af they like a old International