I'm a DIY guy and some of my tiling buddies use Sigma cutters. I tried it myself and when I do some small tiling projects - I will always try and use a Sigma. They are amazing.
Nice, Yeah I mean I used to swear by Rubi cutters, and then you use something like the Sigma, which ticks all the boxes.. and that's it.. Sounds like we've both had similar cutter journeys!
Got a 120cm sigma I do flip from my Rubi tx900 and the Rubi the transition sometimes is difficult I’m defo flipping the handle around thanks for showing how easy it is to that
Sigma is the only cutter I will use for 15+ years. Anything else doesn’t compare. Never seen someone turn the handle around haha. Always used a pull personally unlesss using the 48” or larger size cutters. Series 4 with the laser is AMAZING! Highly recommend! Also you can use the guide that you can put on the bar to use for multiple size cuts.
Hey mate, Pretty good compared to other cutters. Obvs always depends on the tile. But I can't remember a tile that hasn't cut. You can see me cutting a textured tile in this video if it helps..ruclips.net/video/xJNtodGGge0/видео.htmlsi=XwhLWAOrBq5thr_c
Hey there, It depends on what size tiles you think you'll be using present and future. The 62cm in that video is a good all rounder, for large and small tiles. If you were just using small ceramic tiles, Then you could go for a cheaper cutter like the Rubi 40cm. But for porcelain and a wider range of tiles you can't go wrong with the 62cm. Hope that helps!
Hi when not doing square cuts can you see your pencil.line clearly at both ends when using the sigma as well as you can on the rubi?? And can you see clearly enough to get the cutting wheel lined up at both ends...tia
Hey, Because of the bar you have to either have a look from the side, Or line it up with a part of the cutter. I line mine up with the right hand side of the centre bar. At first it's a bit weird compared to a Rubi, But you soon get used to it. The 4 series which is more available than the 3, can also have a laser line attachment.
@@thebespokebloke and do you know what part number because they are different .8 mm, 10 mm, 15 mm. thank you very much. I'm asking because it's for my first sigma
@@GrzegorzH-or9hh I believe it's 10mm, But check this link here it tells you which cutters www.tradetiler.com/tile-cutting-and-drilling/tile-cutter-accessories-spare-parts/shopby/manufacturer-sigma.html?srsltid=AfmBOoqkHzU8i0J8LaX-fRbtQm9wTUr_jcLeXGyN8OKrhaej6nr9izwH
Evening, only recently found your channel and love your work. Clean, crisp, and precise. Just bought a sigma series 4 as your video persuded me (was a toss up between that and montolit). Get to pop its cherry tomorrow on my current project. Keep up the great work 👍
They look so good. I have a 12 year old professional Rubi but it doesn’t cut anywhere near as good as that and no way I could cut thin strips like that. I always resort to angle grinder or wet cutting.
Hi there, thanks for the useful info! I can't find the 3B4M model in the US. What similar model would you recommend? For medium size tile cutting. Series 4?
Hey thanks, Yeah the 3 series is getting harder to get now, as the 4 series is phasing it out. But yeah I'd go for the 4 series, Maybe a 95cm to cover you for all situations?, If you think you may use larger than 60x60 tiles at some point. It's much the same as the 3 series, The models are Sigma Series 4 NEX 4DN. Hope that helps!
Great video. I cannot find the 3B4M anywhere. do you know where I can purchase one? I am in the US. I can find all the pull models but I want a push like you show in the video.
Thanks mate, You can change the handle if you can't find the push version. The 3's are probably slowly getting phased out by the 4's. This is a UK website I use, which delivers international and usually sale everything you need www.protilertools.co.uk/categories/tile-cutters/manual-tile-cutters/sigma-tile-cutters/sigma-series-3-tile-cutters Hope that helps
Sigma makes their cutters to push away from the fence, because the numbers are closer to you and easier to see. When you turn the handle around ,it makes the numbers backwards. Its all preference ,but I grew up using superior before switching to a sigma so it seemed more natural to me the way they are manufactured.
Absolutely personal preference my friend.. Although I don't know who would ever use the measure gauge. I'm racking my brain and don't think I've used it once in years.
@@thebespokeblokeinteresting. I’ve used the sigma klick klock 60cm for almost twenty years, so the push away from the ruler feels natural. Excellent machine. I use the ruler measurements constantly, I frequently don’t need to mark my cut pieces at all, just measure and cut accordingly.
sounds like me. i also grew up using the superior cutters, had 3 different sizes back in the early 80s, great machines for sure. i then switched to sigma and am totally use to the bar at bottom. yes i do alot of mark to mark cutting, but also use the bar measurements alot, so having it close and right side up is the way it should be imo. just bought the series 4- 48 inch sigma and its a dream, its the first push handle sigma i got, as all my others are pull. honestly, if i could have gotten a 48 pull, i would have, but they are hard to get here. one thing i found weird when i got my first sigma was that i didnt have to change the thing-a-ma-bob in the handle. for years i had spares for my superiors, that flat rectangular disc with the metal spring thingy use to wear out and had to be changed to tighten the slop in the handle... good ole days for sure.....thinking on getting the light up laser kit for my new 48 inch sigma, but no reviews anywhere on it.
@@frankcatrini4816 Nice, Yeah on my 90 I haven't changed the wheel in ever, and that's quite a few years, ha! They are a well made piece of kit. I'm not to sure on the size of the breaker handle on the 4, I'm sure it's fine but have seen some negative reviews on it. I would say the laser was a bit of a gimmick, but it may actually help with that one. Could be worth a go for the 40 dollars or whatever it is.
Super informative and an honest review. May have to check out the Sigma as I’m thinking of becoming a tiler. What model would you recommend for a beginner?
Thanks, Glad it was helpful! I'd say the 3B4M - 62cm which is in the video is a perfect all rounder. Perfect for small and medium size tiles, and not to big to carry around. You should be able to get the 3 series at a good price, as stocks are slowly being replaced with the 4 series. And I believe the 3 series is the still the best!
Ill be changing my handle on my 600 tomorrow 👍🏼👍🏼 Got a job coming up...my first porcelain 120x60cm tiles bathroom walls and floors. Is it worth buying the Sigma 120cm....my customer actually said they'd buy it 😬🤔
It'll be so much easier to use! Regards a 120 cutter..Then if the customer is going to buy it then absolutely! If you had a 900 you'd probably be able to survive without it though...in most of my Bathrooms with 120's I don't end up with many full 120 length cuts (and you can mulipulate the set out in your favour) The 90 cutter can cut up to 96cm's, So it gives you that flexibility, and the cutter can take the 120 tile without it being swamped. If a 60 is the biggest you've got, It may be a bit over powering for it just cutting length ways. (Although it would cut fine, it'll just be a bit of a pain with the overwhelming tile size) So long story short, ha.. If 60cm is your biggest cutter, and you think you'll have a lot of lengthways full tiles in your bathroom.. Get the 120 cutter. Hope that makes sense mate
@@thebespokebloke well must thank you for your reply.... alas this customer ever changing his mind...has now today said.....600max....due to costs and deadlines.... It's one of those customers 😎🤔🫣 Trying to help them every which way......save labour, costs as always.... Advice for free my end.....big promises and ideas from them....then the penny drops...and they realise the time, costs involved . Cracking on with my 600 now it seems 🤣🤣 They've not even purchased the tiles for the next bathroom FFS...and trims... Or doors....or kitchen or utility room 🫣🫣🫣🤣🤣🤣 Don't ask🤣🤣🤣 Appreciate your advice tho buddy 🙏🏼🤗
@@Lee.ELIXIR No worries mate, yep sounds like one of them jobs.. You'll probably be able to manage with the 600, with a bit of angle grinding here and there. The other option is if they rent one from a local tile shop, Could work out cheaper all round.
Hey, They are getting a bit harder to find now.. Because of the series 4. But online or tile shops last stock is the best place. Worth it if you can find one for sure!
I hate the Monty for that exact reason, measure bar is too far from the eyes and can’t see properly. Pushing away from the measuring bar is perfect for me, I have full control, can do precise out of square cuts without pencil marks and see every millimetre, but I guess we all different 🤣
I like the sigma but they are not for me. Any tile cutter where you cant see the cutting wheel are only good for straight cuts anything else is just a guess from a point to point mark.
It's pretty easy once you know how to use it, But I know what you mean it's a bit different to say a Rubi design. But once you know where to put the tile, You don't even think about it and will never miss your mark. It's an easy trade-off for me for the ability of cutting over other cutters.
@@thebespokebloke Actually I've just been looking again, after watching your youtube clip, and it seems like the sigma 4 you can see the wheel. I'm going to check one out when I can. They do break much superior to rubi cutters and the action of score and break is awesome. For me it was just not being able to see the wheel that i hated.
It's more natural if your used to traditional tile cutters. Professionals generally use Rubi cutters throughout time, Which are a push towards the measuring bar setup.
Never thought to swap the handle.
You just made my life a whole lot easier.
Thank you good sir
It's an absolute game changer, Glad to be of service!
@@thebespokebloke Have you thought about Montolit ?
I'm a DIY guy and some of my tiling buddies use Sigma cutters. I tried it myself and when I do some small tiling projects - I will always try and use a Sigma. They are amazing.
Nice, Yep they really are mate! Make the job so much easier!
Montolit
Thanks for the recommendation! I recently bought a second hand one and it's such a pleasure to use!
Awesome! They truly are a great cutter and should last you for life. Enjoy!
I have used many professional tile cutters over the years of my tiling career and now I only use a Sigma. Superb piece of kit 😮
Nice, Yeah I mean I used to swear by Rubi cutters, and then you use something like the Sigma, which ticks all the boxes.. and that's it.. Sounds like we've both had similar cutter journeys!
@@thebespokebloke we certainly have my friend as you say there is no comparison better Rubi and Sigma for me. Breaking bar is far far stronger.
🤓👍
Got a 120cm sigma I do flip from my Rubi tx900 and the Rubi the transition sometimes is difficult I’m defo flipping the handle around thanks for showing how easy it is to that
Nice thanks man, Yeah coming back and from a Rubi to Sigma plays with your brain, ha. Nice will make life a lot nicer!
Sigma is the only cutter I will use for 15+ years. Anything else doesn’t compare. Never seen someone turn the handle around haha. Always used a pull personally unlesss using the 48” or larger size cutters. Series 4 with the laser is AMAZING! Highly recommend! Also you can use the guide that you can put on the bar to use for multiple size cuts.
Nice, Yep all personal preference mate and what you're used to!
How good does it cut irregular or textured face tiles ??
Hey mate, Pretty good compared to other cutters. Obvs always depends on the tile. But I can't remember a tile that hasn't cut. You can see me cutting a textured tile in this video if it helps..ruclips.net/video/xJNtodGGge0/видео.htmlsi=XwhLWAOrBq5thr_c
Which model do you recommend for kitchen tiles etc
Hey there, It depends on what size tiles you think you'll be using present and future. The 62cm in that video is a good all rounder, for large and small tiles. If you were just using small ceramic tiles, Then you could go for a cheaper cutter like the Rubi 40cm. But for porcelain and a wider range of tiles you can't go wrong with the 62cm. Hope that helps!
Thanks for the video! I’ll look for one in my area.
Awesome, You may have to go to the Sigma 4 if you can't find any 3 stock, But they are much the same.
Hi when not doing square cuts can you see your pencil.line clearly at both ends when using the sigma as well as you can on the rubi?? And can you see clearly enough to get the cutting wheel lined up at both ends...tia
Hey, Because of the bar you have to either have a look from the side, Or line it up with a part of the cutter. I line mine up with the right hand side of the centre bar. At first it's a bit weird compared to a Rubi, But you soon get used to it. The 4 series which is more available than the 3, can also have a laser line attachment.
@thebespokebloke thanks been offered a 3b4m from local tile shop for £215 ??
@@pault3705 Sounds a bargain, Snap it up!
CAN YOU ROTATE THE HANDLE IN THIS MODEL SIGMA 3D4 95CM OR DO I NEED TO BUY ANOTHER ONE?
Yes mate, should be fine. You can upgrade the handle I believe as well to the max version.
@@thebespokebloke and do you know what part number because they are different .8 mm, 10 mm, 15 mm. thank you very much. I'm asking because it's for my first sigma
@@GrzegorzH-or9hh I believe it's 10mm, But check this link here it tells you which cutters www.tradetiler.com/tile-cutting-and-drilling/tile-cutter-accessories-spare-parts/shopby/manufacturer-sigma.html?srsltid=AfmBOoqkHzU8i0J8LaX-fRbtQm9wTUr_jcLeXGyN8OKrhaej6nr9izwH
Evening, only recently found your channel and love your work. Clean, crisp, and precise. Just bought a sigma series 4 as your video persuded me (was a toss up between that and montolit). Get to pop its cherry tomorrow on my current project. Keep up the great work 👍
Awesome! Thanks for the kind words, and enjoy the cutter.. You will for sure!
@thebespokebloke the cutter was a dream to use. Should of bought one a long time ago. Cheers chap👍
@@simoncheshire-f3y Love that! Now that should also last you a very long time. Just remember to oil the bar and wheel occasionally 👌
They look so good. I have a 12 year old professional Rubi but it doesn’t cut anywhere near as good as that and no way I could cut thin strips like that. I always resort to angle grinder or wet cutting.
Yeah, It is well worth the investment mate.. I mean Rubi changed their breakers a bit in the later models to catch up, But I wouldn't go back now!
Can it cut the wood look like porcelain tiles? If is not a flat surface is my question..
Hey, Absolutely! I use plank tiles a lot, and they are very easy to cut. If I have time I'll get a video up on plank tiles this weekend actually
Such a good video great work
Hi there, thanks for the useful info! I can't find the 3B4M model in the US. What similar model would you recommend? For medium size tile cutting. Series 4?
Hey thanks, Yeah the 3 series is getting harder to get now, as the 4 series is phasing it out. But yeah I'd go for the 4 series, Maybe a 95cm to cover you for all situations?, If you think you may use larger than 60x60 tiles at some point. It's much the same as the 3 series, The models are Sigma Series 4 NEX 4DN. Hope that helps!
Great video. I cannot find the 3B4M anywhere. do you know where I can purchase one? I am in the US. I can find all the pull models but I want a push like you show in the video.
Thanks mate, You can change the handle if you can't find the push version. The 3's are probably slowly getting phased out by the 4's. This is a UK website I use, which delivers international and usually sale everything you need www.protilertools.co.uk/categories/tile-cutters/manual-tile-cutters/sigma-tile-cutters/sigma-series-3-tile-cutters Hope that helps
Sigma makes their cutters to push away from the fence, because the numbers are closer to you and easier to see. When you turn the handle around ,it makes the numbers backwards. Its all preference ,but I grew up using superior before switching to a sigma so it seemed more natural to me the way they are manufactured.
Absolutely personal preference my friend.. Although I don't know who would ever use the measure gauge. I'm racking my brain and don't think I've used it once in years.
@@thebespokeblokeinteresting. I’ve used the sigma klick klock 60cm for almost twenty years, so the push away from the ruler feels natural. Excellent machine. I use the ruler measurements constantly, I frequently don’t need to mark my cut pieces at all, just measure and cut accordingly.
sounds like me. i also grew up using the superior cutters, had 3 different sizes back in the early 80s, great machines for sure. i then switched to sigma and am totally use to the bar at bottom. yes i do alot of mark to mark cutting, but also use the bar measurements alot, so having it close and right side up is the way it should be imo. just bought the series 4- 48 inch sigma and its a dream, its the first push handle sigma i got, as all my others are pull. honestly, if i could have gotten a 48 pull, i would have, but they are hard to get here. one thing i found weird when i got my first sigma was that i didnt have to change the thing-a-ma-bob in the handle. for years i had spares for my superiors, that flat rectangular disc with the metal spring thingy use to wear out and had to be changed to tighten the slop in the handle... good ole days for sure.....thinking on getting the light up laser kit for my new 48 inch sigma, but no reviews anywhere on it.
@@frankcatrini4816 Nice, Yeah on my 90 I haven't changed the wheel in ever, and that's quite a few years, ha! They are a well made piece of kit. I'm not to sure on the size of the breaker handle on the 4, I'm sure it's fine but have seen some negative reviews on it. I would say the laser was a bit of a gimmick, but it may actually help with that one. Could be worth a go for the 40 dollars or whatever it is.
How is the 60x60 tiles?
Cuts 60x60 like a dream!
😂😂 No way... I'm doing that first thing in the morning.
See the light..😂
Super informative and an honest review.
May have to check out the Sigma as I’m thinking of becoming a tiler.
What model would you recommend for a beginner?
Thanks, Glad it was helpful! I'd say the 3B4M - 62cm which is in the video is a perfect all rounder. Perfect for small and medium size tiles, and not to big to carry around. You should be able to get the 3 series at a good price, as stocks are slowly being replaced with the 4 series. And I believe the 3 series is the still the best!
Ill be changing my handle on my 600 tomorrow 👍🏼👍🏼
Got a job coming up...my first porcelain 120x60cm tiles bathroom walls and floors.
Is it worth buying the Sigma 120cm....my customer actually said they'd buy it 😬🤔
It'll be so much easier to use! Regards a 120 cutter..Then if the customer is going to buy it then absolutely! If you had a 900 you'd probably be able to survive without it though...in most of my Bathrooms with 120's I don't end up with many full 120 length cuts (and you can mulipulate the set out in your favour) The 90 cutter can cut up to 96cm's, So it gives you that flexibility, and the cutter can take the 120 tile without it being swamped. If a 60 is the biggest you've got, It may be a bit over powering for it just cutting length ways. (Although it would cut fine, it'll just be a bit of a pain with the overwhelming tile size) So long story short, ha.. If 60cm is your biggest cutter, and you think you'll have a lot of lengthways full tiles in your bathroom.. Get the 120 cutter. Hope that makes sense mate
@@thebespokebloke well must thank you for your reply.... alas this customer ever changing his mind...has now today said.....600max....due to costs and deadlines....
It's one of those customers 😎🤔🫣
Trying to help them every which way......save labour, costs as always....
Advice for free my end.....big promises and ideas from them....then the penny drops...and they realise the time, costs involved .
Cracking on with my 600 now it seems 🤣🤣
They've not even purchased the tiles for the next bathroom FFS...and trims... Or doors....or kitchen or utility room 🫣🫣🫣🤣🤣🤣
Don't ask🤣🤣🤣
Appreciate your advice tho buddy 🙏🏼🤗
@@Lee.ELIXIR No worries mate, yep sounds like one of them jobs.. You'll probably be able to manage with the 600, with a bit of angle grinding here and there. The other option is if they rent one from a local tile shop, Could work out cheaper all round.
I like them, but I'd hate not having a case.
Fair, You can buy a separate case though, I'm just kind of used it now
Ola como faço pra comprar uma Sigma de 120cm estou no Brasil
ei, não tenho certeza de quais lojas de azulejos você tem por aí, mas imagino que elas devem estar disponíveis on-line para você
Where do I buy this machine?
Hey, They are getting a bit harder to find now.. Because of the series 4. But online or tile shops last stock is the best place. Worth it if you can find one for sure!
Wait to you have to pick it up and carry it around with you
?? Sigma's are pretty light.
I hate the Monty for that exact reason, measure bar is too far from the eyes and can’t see properly. Pushing away from the measuring bar is perfect for me, I have full control, can do precise out of square cuts without pencil marks and see every millimetre, but I guess we all different 🤣
Yeah everyone has their own techniques for sure!
I like the sigma but they are not for me. Any tile cutter where you cant see the cutting wheel are only good for straight cuts anything else is just a guess from a point to point mark.
It's pretty easy once you know how to use it, But I know what you mean it's a bit different to say a Rubi design. But once you know where to put the tile, You don't even think about it and will never miss your mark. It's an easy trade-off for me for the ability of cutting over other cutters.
@@thebespokebloke Actually I've just been looking again, after watching your youtube clip, and it seems like the sigma 4 you can see the wheel. I'm going to check one out when I can. They do break much superior to rubi cutters and the action of score and break is awesome. For me it was just not being able to see the wheel that i hated.
@@AndrewBrelsfordNice, and don't forget you can attach a laser on the 4 as well!
Why Turn the handle around? Dont get the Point.
It's more natural if your used to traditional tile cutters. Professionals generally use Rubi cutters throughout time, Which are a push towards the measuring bar setup.