Visit Germany's Leading Steel Mill. How Pipe Profile Production Line & Hot Rolling Mill Work
HTML-код
- Опубликовано: 14 май 2023
- Visit Germany's Leading Steel Mill. How Pipe Profile Production Line & Hot Rolling Mill Work
0:25. The Salzgitter Flat Steel plant
5:34. Hot rolling mill
6:59. Cold rolling mill
8:38. Modern Tube and Pipe factory
13:55. Oval Channel Production Process
17:47. Profile drawing machine
22:38. The Makina pipe profile production line
25:52. The process of manufacturing a wind tower
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the RUclips Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.
![Latto - Sunday Service (feat. Megan Thee Stallion & Flo Milli) [Remix] (Official Video)](http://i.ytimg.com/vi/9gL0F1xIt2I/mqdefault.jpg)
I LOVE LEARNING ABOUT THE STEEL MANUFACURING PROCESS.
The magnitude of these refineries just blows me away.
The amount of parts that goes into each machine/operation is staggering.
These places BLOW AWAY the "wonders of the world".
every single advanced tech of the modern day blows the entire wonders of the past completely without even question... its literally insane how far tech has come in less than 100 years
I worked with liquid steel for 29 years. One melt 350 tons. The plant produces about 10 million tons of steel per year. In case of danger, always run to the safe side and only then look back at what happened. Sometimes when going to work, an inner voice tells you that something is going to happen at work today... And it does. This is called intuition based on vast experience. At work, like a pilot in a dogfight, you must constantly turn your head and constantly monitor the situation around you. Greetings from Russia
That’s a good video man very informative
💯Awesome video thanks for sharing 👍👍
Thank you for this nice video.
شكرا لكم أن جعلتم الحياة أفضل
WOW!!!! I AM SO IMPRESSED!!!!
A MUST WATCH!!!!
THANK YOU SO MUCH.
This is great❤
5:40 Those red glowing steel slabs look so awesome!
Thanks for your video
Really Amazing 🎉
The imagination that goes into inventing the machines of modern industry is amazing. I would rather tour a modern factory to see the ingenuity of machines, computers creating products then a modern art gallery where an abstract artist can't put two brush strokes together that makes any sense.
And then there's the fork lift with bricks on top being used to bend the round pipe into an oval while 2 guys hold it
@@whatsmolly5741 That was just to get it on the real oval bender, still funny though.
@inothome just so out of place with all the modern machines, I had to rewind to make sure I saw it right xD
So, you can't judge these machines but you do judge art?
@@AndreasDelleske I love portraits and landscapes of centuries past, it required extreme sacrifice, patience to capture the detail and expressions. Abstract art is whimsical and enjoyable but any 12-year- old can produce it in minutes without more thought or effort than making a peanut butter and jelly sandwich.
Fascinating.
Thank you for this nice video. I live in 300 km far away from Chelyabinsk Pipe Factory and have never seen how pipes are made. However, steel production process is shown well, I can confirm, as one of the biggest Russian Steel production plants is located in 20 minutes from my home and I worked there for 9 long years :-)
Quite strange, why you tell about big diameter pipes, but showed cold rolling, hot dip galvanizing and coating production, instead of hot rolling mill, which produces plates at width of 5000 mm and length 10-20 meters!
That hot rolling mill which was showed is absolutely different to that, which produces raw material for big-size pipe production.
By the way, these tubes are used for Nord Stream, which was exploded.
useful information
Thank you jayahind.
Nais !.
I Like.
Thank you.
Thank you too
@@YouCanDo_TV siempre presente !.
Muchas gracias a todos por sus programas 🖐.
as a freshmen engineer in my first job, i was tasked to desimg one these pipes with curviture.
its really fun to work with sheet metals
good video
amazing
thanks
Come from Cambodia ❤️
nice
"Leading" - Greetings from Thyssenkrupp. Glück Auf!
Thank You for using a Lady which speaks very well and understanding voice !
Its AI generated.
@@asad-kc8zf Better than the male AI voice.
The video starts with steel mill in Germany and then transcends into fabricating shops in Turkey. Quite inconsistent title.
Fascinating just blow your mind technology. Just engendering at his best. Hmm
Very nice presentation! 🤔
However, it tends to make one a tad jealous to see that there are others in countries of people with much sharper tools in the shops. 😩
Grabe ginawa matiryales nyo
German steel mills are gone ! The Glory times where in the 50s 60s and 70s
Next video Safety Glasses ON for the employs...Thank you for the video.
Okay OSHA..😂
Kitty brought it-kitty took it with her.
Lot goes into making the machines and facilities for assembly
I can tell you most of the workers are wearing their silver protection clothes just for the camera. 15 years ago i was a shunting locomotive driver in a big yard. Once a week we had to bring a torpedo shaped railway waggon filled with molten steel to the factory. We had to position the waggon in their hall. Then a worker came, opened the top, and took a sample with a lance like device. While wearing an armless t-shirt or even underwear. Sparks were hitting his chest..no big deal..Then the steel was tilted in the furnace. That was great to watch. So we used to stay and watch the process even though we were expected at the yard for other work 😂
You have obviously no single clue about worksite standards and regulations in Europe/ Germany! No single employee would even dream about breaking any workplace regulations, while he would be fired on the spot, and even risk legal consequences by eventual casualties! Your lousy USAmerican standards is often used an examples for how accidents and catastrophies are caused by irresponsible laws and careless behaviour!
Stay safe
@@OmmerSyssel You need to look at India's factories/refineries. Hell, I'm sure you already have. Guys working barefoot.
@@OmmerSyssel Stahl kommt nicht in Torpedos, es muss Roheisen gewesen sein, erst wenn der Kohlenstoff heraus ist, wird es zum Stahl
keine Ahnung wo du warst, aber in Duisburg gibt es kein Stahlwerk, bei dem keine Schutzkleidung getragen wird
@@OmmerSyssel How can you know? Were you there with me? It took place in Mülheim Styrum. Friedrich Wilhelm Hütte. I just tell the people here what i saw. And i witnessed this more than once. But since you know better, it must have been an illusion for sure. By the way, this did not take place in America. Right here in Germany, the country of which standards i have no clue about considering your statement, despite living here for amost 50 years. Stay safe as well.
German god of steel
You know. Vlogs like this, modern steel making, is more interesting than watching Pakistani or Indian mfg'ing videos where 19th / 20th century methods are used by men in sandals. Don't get me wrong cool that they get it done. But watching more modern demonstrations are IMO more interesting.
Pls upload some chemical plants videos too....they also look magnificient but r too technically involved...but their beauty is limited to the eye of a chemical engineer only...
So hard on Mars to show the machines that make the machines that make the pipes.😂
Grace. That prayer said before eating.
So much of the narration on this is just wrong. Like the descriptions and how they match what's going on the screen.
I think the subtitle at the centre of the screen takes away the real intent of this video
0:34 Bro has stepped off a moving train bfeore
I worked on the remote control of a blast furnace, a very difficult and stressful job, toxic gases and dust shortened my life by five years
They would make a bloody fortune if they could figure out how to make a sheet steel yanket
No AI voice over i liked just the music.. puts me to sleep
How is Germany being able to keep its blast furnace while US, UK are import dependent on east Asia?
Coming soon in EEUU.
17:11 Simplicity and lowtech🤷🏼♂️
Steel is not timeless! It's a relatively new material.
I cringed badly everytime I heard her say "Salzgitter Agh". And she said that a lot!
It's "Salzgitter A.G."
A.G. as in "Aktiengesellschaft", meaning Stock Exchange Listed.
Think for wching year remindr video
ខ្ញុំចង់បាន រោងចក្រ ស្លររ៉ែដែក ទំនើបបែបចឹង ចូលក្នុងប្រទេសកម្ពុជា 😯😻😯 ។
Пол пот как поживает ?
@@BlakManSkyf I love Russian humor
@@leonhauptmann3301 😁
I am interested for 355.6mm dia and 400mm dia Seamless Pipe
Baby ( kingDom TeSla ) 😯😻😯 love
20:56 the "Safety Features" are missing a Cover for the Saw Blade 🤔
There is no cover needed, the blade isn't spinning at a high speed
Keep your fingers away from the blade. You soon learn!
I am robot. Process is life. I made this video in my unpaid spare time. Because I love process/life.
الحديد يطرق مازال حامى
Salzgitter AG
I think this channel uses AI voice over
Not just voice over. It uses AI scripts too. Thats why there are so many filler words and phrases. But this video doesn't seem to be as bad about that as other videos from this channel.
Plate covert into pipe by using press brakes,pipe is not 100%circle in shape becoz of bending process,i worked in industry but we are use concave and convex rollers in place of SAW,ERW we use,main problem is its difficult to maintain thickness through out
The information is good. But 21:32 cameraman is so bad.
It starts in Germany, but it then goes to Russia, Turkey, and Scotland. The video is not correctly described. Also, the captions are sometimes wrong or very out of sync.
If you noticed the technology used, you would have noticed even the RuSSian plant were dependent on German technology. A pattern seen all over RuSSia where modern reliable technology is wanted!
@@OmmerSyssel It is also likely that the steel was also made in Russia. It's pretty entertaining actually.
A powerful mining industry makes high-quality steel, which is sent to Germany, where high-quality steel sheets are produced, which are then exported back to Russia.
The benefits of access to resources and cheap energy combined with German labor and technology results in a quality product at a reasonable price.
Dimensions with a , instead of . used in Europe… but the views are great…
It is not correct. Steel from Germany has never came to Russia. Chelyabinsk produces big-size pipes from local hot rolled steel, which is produced by MMK and Severstal. However, most of equipment is German (SMS). In the meantime, nowadays, only name is German, but all materials and people for construction are from China.
Steel is still a good material, though expensive you can purchase it for a steal at some places
With a joke like that you need a kick in the....brass!
The way she pronounced A.G. 😂
Silver Mercury must be a liquid.
Please release a version of this without a narrator.
True
Is this the same pipe that somebody destroyed at the Baltic sea to cripple German industry??
No those are landlines. The sealines are conrete reinforced and much larger in diameter.
Evropljani su najvise doprinjeli razvoju covjecanstva.
it is pronounciated like majit not makit.
vid starts with German high tech steel Mfg. then devolves into very low tech fabrication shops
"One thousand, eight hundred fifty millimeters," or "1.85 meters."
"Salzgitter Aag." Funny. She means "Salzgitter AG," or "Salzgitter Aktiengesellschaft."
AI Narrator.
Is that a human narrating or some software, cant tell the difference.
It’s robot voice
9:09
Откуда надпись на русском?😲
это завод в челябинске, трубопрокатный.
🫂🫂🙋🙋❤❤❤👍🏽👍🏽👍🏽👌👌🥰🥰🥰👂👈🫂🙋❤😒👈🙋❤❤🥰🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹☕🍧🫖❤👌🙋
How many solar panels does it take to power an arc furnace?
Or how many wind turbines😂😂😂
A s**t load. LOL.
A whole lot of steel and copper go into one stupid wind tower. What's the payback on that Unsinn?
#Thumbnail ?
Still in business?
in business
13:35 - "gazprom" - he... he... he... - Germans like Gazprom - - and North-stream 1 & 2 - ha... ha...
Putler is short 300 million in gas income every month...russia will be
ruined in a few years.
❤❤❤❤❤👍
Good Luck to german industry without the russian gaz ! Thank you the anglo-saxons for the North stream (?)
Doing fine, thanks...
My good grief that AI voice is giving me a headache..
SUGGESTION: USA INDUSTRIAL REVOLUTION.
А мне сказали, что у Германии больше нет дешёвого русского газа, и Германия больше металлургией не занимается...
Man this is some serious stuff going on here ,to much for my brain to handle,I’ll just watch and fall asleep cheers 🙏❤️🦘🇦🇺👹👹
Doesn’t matter who blew up the gas line. Putin turned off the spigot before that. No gas was going to go to Germany unless Putin got what he wanted - Ukraine.
Самое интересное Германия создала евро союз. Тутже металл делают и продают в Россию. У вас земля есть но они унечтожают другие народы ценами, налогами. У России газ покупали. А для себя жизнь то сделали. Или по пути Гитлера пошли, что танки Украине начали давать. В Евросоюзе некоторые страны нищие. Лучше пластик композит или что из газа делали. Альпы как бы есть. А где горы и вода всегда можно неплохо жить.
DEINDUSTRIALIZE GERMANY
np, we already have reached spiritual goal. knowledge is power and knowledge is the main power and we have it all. nobody can take that away. hrhrhr!
trust german products no need to worry,
WW? sure.
It's Turkey, not Germany.
Salzgitter AG is not in Kebab Country.
Never ever
Its a mix of different Videos form different locations
How you know?
THERE is TURKISH machine factory. Not only German
So is this German steel mill still in production now that Germany had deindustrialized itself with the destruction of the Nord Stream Natural Gas pipeline by the United States?
We are not a robot we live in America been there done that matter fact got tired of the Germans to live here interfere with me and my women and got a wife at home😮
I find flange production rather banal.
বোলতে চাই না আমার ঠাকুমা কেই ঠোকিয়েছে
I thought this was a German factory. Why are all the employees Middle Eastern? Are they cheaper and expendable? Where is the safety equipment?
if your using middle east employees you dont need to spend any $ on safety gear.
It's s German factory. Read about German forced labour work camps.
No big difference over the years it seems.
@@Kawka1122 Hah, that's a good one.
Yes
@@curtisbryce5096 There are always sick minds about that dream up whatever they wish.
This is so old fashioned. No wonder Germany is losing its manufacturing.
I am wondering about the cost of heating red hot that German steel, after Germany's good friends from NATO blew up the pipeline feeding Germany with cheap natural gas.
Okay Alex
They will importing from China and India soon.
Too hamfisted, Sergei. Vlad says, "No potato" for you.
Nobody imports from india
Hello Ivan! Considering the fact that your megalomaniac Mafia boss broke his delivery obligations long before NS1 and 2 were sabotaged, it seems a bit weird implying Germany should be in unsolved trouble ...