To answer why the linetype finishes short and starts after the origin point: Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
BIG QUESTION WHY DOES THE TEXT KEEP COMING UP TINY AND NOT IN LINE WITH THE LINES? NUMEROUES PEOPLE HAVE COMMENTED ON THIS YET NO RESPONSE. PLEASE HELP US
I'm trying to create a wavy line which is basically constructed of shallow arcs all touching each other to make a continuous wavy line. Following all the procedures you demonstrated on creating a line it doesn't produce a wavy line. So I tried making a shape using an arc. I copy the same arc to the end of the first but mirror it so its facing the opposite direction then I join them and go thru the same MKLTYPE procedure. I just don't get the wavy line in the end. Can you suggest something I can try to make this happen correctly?
Great tutorial. Thanks. One question though. On your Sanitary linetype, the line did not fill to the end of the line. I have this same problem. How do I fix it so that it extends all the way to the endpoints?
Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
Thank you very much! I would like to know if it is possible to make a custom linetype with other than the default colour? When I make a linetype and change the colour nothing happens, it remains black in the end. I would like to make a linetype with more than one colour in it (so in this case it's not an option to make a layer with the colour I want it to be and put it on that layer).
Brandon, Thanks for the video....but I have a question. Why the text of the linetype I've created shows up lower and not centered to the line. What I'm missing??
Hi. I know how to make new linetype with shapa and it works ok. On my computer. When i send my drawing or only .lin file to someone, its not working. Is it because od shape or what i have to do that linetype will work on everyone computer? Thank you.
have drawn a figure in autocad 2017 with different line types but when i directly copy this figure to word 2013, all the line types appears to be the same. how can i solve this problem such that these line types appear in word as drawn in autocad 2017?thanks.
hello folk, thanks for the job BUT... As many of others tuto makers, you say that after creating a shape, erase the line of creation, and call the "SHAPE" command in the command line to insert the nex crated shape in the pazttern to go on with the typeline creating process, that's right??? The point is, anytime i write SHAPE in my command line, it just open again the record window of shape cration.... I did it 100 times... 1) draw polylines..2) MAKESHAPE in the tools menu of express tool,and record trough the window that open by itself trough the process, giving a name etc, etc.... then 3) delete the line of creation on the sceen just like you do, and write SHAPE on th command line (to call the new shape on the screen), and here comes the trouble, no choice purposal like on your screen "enter shape name or?" but instead the shape recording window open again, on & on & on... Could you help me please ????
@@henrycremieux6773 Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
I get an error when I try to create a line type. It says bad definition at line 2 of file. Comma expected after text string. Line type creation failed. I've been at this all day and it's driving me crazy. I followed all the steps exactly. I'm using Autocad 2012
Thank you you saved me. I have had so much trouble finding this tutorial.
I know it's pretty off topic but does anybody know of a good place to watch newly released series online?
@Will Giovanni I watch on flixzone. You can find it by googling :)
@Enzo Nikolai definitely, I've been using flixzone for since april myself =)
@Enzo Nikolai Thank you, I went there and it seems to work :D Appreciate it!!
@Will Giovanni you are welcome :D
To answer why the linetype finishes short and starts after the origin point:
Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
@12:43 how do you fix the gaps at both ends of SAN linetype? Is there a way to let the line connect to the grip point?
Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
BIG QUESTION WHY DOES THE TEXT KEEP COMING UP TINY AND NOT IN LINE WITH THE LINES? NUMEROUES PEOPLE HAVE COMMENTED ON THIS YET NO RESPONSE. PLEASE HELP US
Hi there is any way to make it work with curves, arcs in polylines? Thx
it is very helpful, Thank you.
Great Work Sir. Keep it up.
I'm trying to create a wavy line which is basically constructed of shallow arcs all touching each other to make a continuous wavy line. Following all the procedures you demonstrated on creating a line it doesn't produce a wavy line. So I tried making a shape using an arc. I copy the same arc to the end of the first but mirror it so its facing the opposite direction then I join them and go thru the same MKLTYPE procedure. I just don't get the wavy line in the end. Can you suggest something I can try to make this happen correctly?
Great tutorial. Thanks. One question though. On your Sanitary linetype, the line did not fill to the end of the line. I have this same problem. How do I fix it so that it extends all the way to the endpoints?
Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
i love u so much dude. really helpful and solveable. i very impress and appreciate ur work
Thanks for watching and glad i could help! And appreciate the comment!
Thank you very much! I would like to know if it is possible to make a custom linetype with other than the default colour? When I make a linetype and change the colour nothing happens, it remains black in the end. I would like to make a linetype with more than one colour in it (so in this case it's not an option to make a layer with the colour I want it to be and put it on that layer).
Brandon, Thanks for the video....but I have a question. Why the text of the linetype I've created shows up lower and not centered to the line. What I'm missing??
Hi. I know how to make new linetype with shapa and it works ok. On my computer. When i send my drawing or only .lin file to someone, its not working. Is it because od shape or what i have to do that linetype will work on everyone computer? Thank you.
Thanks sir!!It is so useful.
Great Tutorial , Thank You
THANKS A LOT FOR GOOD IFORMATION
Great work!
Good and clear-but how do I create the linetype where the arrow only appears at line vertices
have drawn a figure in autocad 2017 with different line types but when i directly copy this figure to word 2013, all the line types appears to be the same. how can i solve this problem such that these line types appear in word as drawn in autocad 2017?thanks.
Can we make a custom line type having both shape & text?
Thanks, exellent video
+tmac9392 thanks for watching!
thanks, you've explained damn clear 😉
hello folk,
thanks for the job BUT...
As many of others tuto makers, you say that after creating a shape, erase the line of creation, and call the "SHAPE" command in the command line to insert the nex crated shape in the pazttern to go on with the typeline creating process, that's right???
The point is, anytime i write SHAPE in my command line, it just open again the record window of shape cration....
I did it 100 times...
1) draw polylines..2) MAKESHAPE in the tools menu of express tool,and record trough the window that open by itself trough the process, giving a name etc, etc.... then 3) delete the line of creation on the sceen just like you do, and write SHAPE on th command line (to call the new shape on the screen), and here comes the trouble, no choice purposal like on your screen "enter shape name or?" but instead the shape recording window open again, on & on & on...
Could you help me please ????
, it's me again, i've found something, a command called "SHPNAME" and not "SHAPE" maybe it will work that way
Not working...
@@henrycremieux6773 Do exactly as Brandon has described however, when making the linetype, have the line first and the shape to the right of it. Make the origin point the start of the line, not offset to the left of the line. Then have the end of the linetype offset to the right of the shape!
BUEN VIDEO, GRACIAS
WHEN I MAKE MY LINTYPE WITH THE TEXT MY TEXT ALWAYS APPEARS ON TOP OF MY LINE
PLEASE HELP?
I get an error when I try to create a line type. It says bad definition at line 2 of file. Comma expected after text string. Line type creation failed.
I've been at this all day and it's driving me crazy. I followed all the steps exactly. I'm using Autocad 2012
THANK YOU!
Thanks for watching!
Everybody uses the EXPRESS, not one video on how to o it without the express tool bar. Still don't know how.